Lubes/Cleaners

Finish Line's Super Bike Wash quickly cleans dirt, clay, road grime and chain gunk off your bike. Five different cleaning agents work together to create a high-speed cleaning system. Three different rust and oxidation inhibitors protect metal surfaces to prevent rusting. It's safe for all bike surfaces.

Finish Line® Super Bike Wash™ is ready to use and requires no water rinsing. It quickly cleans dirt, dust, clay, grime, chain soils, nutritional residues, and winter storage grunge off all surfaces of your bike. Super Bike Wash™ uses state of the art, eco-friendly cleaning agents that work together to create a high speed cleaning system. It requires little to no scrubbing. Super Bike Wash™ is non-toxic and meets the highest readily biodegradable standards. It can be safely used indoors or outdoors. Super Bike Wash™ can be used two ways: spray on and wipe off, or spray on and hose off. It is strong enough to remove surface grime from the drivetrain, and safe enough to remove grime build up on frames, saddles, brakes, and handlebar tape. It is safe for use on carbon fiber, titanium, aluminum, steel, and clear coat. • Ready to use with no water rinsing required • Safe for use on all surfaces and paint finishes • 100% readily biodegradable and non-toxic • State of the art cleaning agents remove dirt and grime • Superior rust inhibitors protect metal parts after application • Also available as a concentrate

Finish Line WAX Lubricant goes on wet, but dries to a hard, dry, super-slick wax film. No oily greasy film to attract or absorb dust and dirt. DuPont's metal bonding Krytox® lubricating film in combination with M2 molybdenum, specialized waxes, and more, make our WAX Lube even slicker, quieter and longer lasting. WAX Lube requires more frequent application, but your drivetrain will remain nearly contaminant-free, so cleaning before relubing is not usually required. Drivetrain parts that stay this clean last longer and work better! Perfect for cyclists who value cleanliness over all else.

The great thing about wax-type lubes is that the shedding action of wax keeps parts cleaner during most riding conditions. Finish Line's Wax Lubricant is a unique formulation that features DuPont's Krytox, a highly advanced, thermally stable lubricant. Its specialized paraffin waxes set up dry and hard to repel grit and grime so your drivetrain runs silky-smooth and stays clean.

Wet Lube is typically recommended for extreme conditions. Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives. Wet Lube is Finish Line's strongest, longest lasting and most water resistant lubricant. Wet Lube goes on wet, and stays wet, to provide maximum drivetrain smoothness, extremely quiet rides, and ultimate rust protection in the harshest of environments. If you use Wet Lube for riding off-road or in dry climates, be sure to wipe the excess from parts to minimize the attraction of dirt and grime. Since 1994, when Wet Lube was first introduced, it has become the preferred lubricant for many professional on and off-road teams around the world. Use Wet Lube when you ride hard and long. Proven performance for 100-plus mile rides, muddy off-road conditions, long rainy commutes, and foggy salt-air coastal climates. A heavier, wet-style lubricant that requires a little more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection.

Pro X Bio-Bike Cleaner Concentrate is powerful but at the same time safe on all parts of a bicycle. 100% Bio-Degradable. Non-toxic. Water Soluble. Eco Kind. Low Scent. Rinses Clean. Leaves no residue. No water spots. Long-lasting performer and efficient in bicycle ultrasonic and aqueous parts cleaners (heated or cold). USES: Refilling spray bottles. Our in-line hose Mixing Unit. Bucket. Small parts cleaning containers. Chain cleaning machines. Using a hose end sprayer or pressure washer, you will experience sudsy, not foamy. Ultrasonic bicycle parts cleaners. Aqueous bicycle parts cleaning tanks (cold or hot). Highlights: - Efficient. Performance-based - 100% Biodegradable - Non-Toxic - Safe on all parts of a bicycle - Water Soluble - Use in Ultra Sonic parts cleaners - Use in Aqueous parts cleaner - Leaves no residue or water spots

PRO X Freehub Grease, using our MRCC Micro Resistant Complex Compounds, is specifically designed for all freehubs that require a very lightweight grease. Non-pawl freehubs recommend a grease to stay in the mechanisms moving parts. Oils generally are to thin and will move away from moving parts leaving them exposed to wear and malfunction due to lack of lubrication. PRO X Freehub Grease performs in a broad temperature range from the summer heat to the extreme cold temperatures. "Pour Point" of PRO X Freehub Grease is -30F / -34C degrees. PRO X Freehub Grease works exceptional in hubs that share lubrication between the freehub and wheel bearings. Follow the manufacturer's specification for the volume required in your freehub body to experience the superior performance of Dumonde Tech's PRO X Freehub Grease. Our MRCC Micro Resistant Complex Compounds have been in development for over 10 years by Dumonde Tech Design Group. MRCC technology provides premium lubrication by reducing friction better than other lubricants. Lighter viscosity while maintaining high protection. The increase in adhesion creates higher film strength. Originally developed for our Motorsports lubrication, MRCC, is incorporated into our revolutionary PRO X bicycle lubricants. Everyone who has tested or raced using PRO X reports that its performance is significantly better than any other lube they have ever used. Benefits: - Performs in cold conditions. Ideal for Snow Bikes - Reduces resistance - Reduces watts used. - No shipping restrictions, can be sent anywhere in the world by air or ground. - No VOC's.

PRO X Freehub Oil is the perfect addition for the bicycle market and is part of the superior product line of Dumonde Tech. Dumonde Tech is the first and only lubricant company in the bicycle industry to specifically design a lubricant for Pawl style freehubs which require a lightweight lubricant. PRO X Freehub Oil uses our MRCC Micro Resistant Complex Compounds and is an improved new technology of our original freehub oil. PRO X Freehub Oil performs better in an even wider temperature range. "Pour Point" is lower than -40F / -40C degrees, is extremely low friction, providing superior protection. No sticking pawls due to age or temperatures. Follow the manufacturer's specification for the volume of oil required in your freehub body to experience the ultimate performance of your freehub using Dumonde Tech's PRO X Freehub Oil. The viscosity and temperature range of PRO X Freehub Oil makes it the "go-to" cable lube and brake lever lubricant for the small moving parts and the lightweight spring action they have. Temperatures and age do not effect the performance of PRO X Freehub Oil like other OE greases or thick, time and temperature aged greases. These become thicker and stickier as they age slowing down the important movement of the parts. Our MRCC Micro Resistant Complex Compounds have been in development for over 10 years by Dumonde Tech Design Group. MRCC technology provides premium lubrication by reducing friction better than other lubricants. Lighter viscosity while maintaining high protection. The increase in adhesion creates higher film strength. Originally developed for our Motorsports lubricants, MRCC, is incorporated into our revolutionary PRO X bicycle lubricants. Everyone who has tested or raced using PRO X, report that its performance is significantly better then any other lube they have ever used. Benefits: - PRO X The BEST for cold conditions - PRO X Superior to mineral oil which is not a lubricant! - PRO X Reduces watts used - PRO X reduces resistance - PRO X products have no shipping restrictions, can be sent around the world by air mail. - PRO X has <3% VOC.

Dumonde Tech's PRO X Liquid Grease is a very high-performing replacement for traditional viscosity grease. PRO X Liquid Grease using our MRCC Micro Resistant Complex Compounds greatly reduces the coefficient of friction. PRO X Liquid Grease polymerizes and bonds to the surfaces which provide extremely low drag, high sheer strength, and protection. PRO X Liquid Grease will migrate to heat to provide lubrication at critical areas. PRO X Liquid Grease is highly recommended for steel and ceramic cartridge bearing. Waterproof, which protects bearings from corrosion. Hybrid (Ceramic balls, steel races) bearings are prone to corrosion and wear without a lubricant. PRO X Liquid Grease is the perfect solution. PRO X Liquid Grease essentially eliminates drag that grease-packed steel bearings experience. You will have a drag-free bearing, especially in freezing temperatures. Great for suspension fork legs, full suspension pivots, wheel bearings, roller bearing, and jockey wheels. A proven application for spoke nipple and rim interface. Can be used as a chain lube for very extreme muddy conditions of mountain bike and cyclocross riding or racing. PRO X Liquid Grease can be used with our PRO X MR Grease to add viscosity if needed. Our MRCC Micro Resistant Complex Compounds have been in development for over 10 years by Dumonde Tech Design Group. MRCC technology provides premium lubrication by reducing friction better than other lubricants. Lighter viscosity while maintaining high protection. The increase in adhesion creates higher film strength. Originally developed for our Motorsports lubrications, MRCC, is incorporated into our revolutionary PRO X bicycle lubricants. Everyone who has tested or raced using PRO X, reports that it performs better than any other lube they have ever used. Benefits: - PRO X reduces resistance and reduces watts used. - PRO X products have no shipping restrictions, can be sent anywhere in the world by air or ground. - PRO X has low VOCs.

We worked diligently on our next generation of bicycle chain lubricant for several years. Our Micro Resistant Complex Compounds (MRCC) had been in development for over 10 years. Originally developed for our motorsports lubrication, MRCC technology creates a lighter viscosity while maintaining high protection, reducing friction, and increase in creating much higher film strength than common, traditional technology. PRO X LITE Bicycle Chain Lubricant Like our Regular chain lube, cyclists who tested or raced using PRO X Lite, report it to perform better then any other lube they have ever used. Even those riders that use our Standard Lite and Original chain lubes. A bold statement even for us to claim, but comes from years of technology, formulation, and testing. PRO X Lite brings the aspect of polymerization and MRCC oils that by design migrate for complete wetting of the surfaces. Benefits: - MRCC technology creates an extremely low friction bond. - A dry lubricant that does not attract dust and dirt. - Watts. Very little is used to move your bike parts. - 10 time high lubricity the Teflon. Ceramic lubes? Catchy hype. - Waterproof which will not wash off. - Drive train stays clean, last longer, runs silent. - Extremely durable, outlasts all other chain lubes in any condition. - Tamely scented. - Applied sparingly for the best results and increased value. - Can be shipped around the world via air freight and ground. PRO X LITE is the lighter version to our PRO X REGULAR chain lubricant. PRO X LITE is ideal for a road bike, wet or dry, and extreme dry off-road trail conditions or over cyclist you are prone to over applying. PRO X LITE can be used on all cables, pivots points and seals. Safe on plastic, rubber, and all seal materials. The product is designed to not harm your components. Our products are engineered to perform with minimal "carbon footprint" by not washing off in water, to use sparingly, lasts longer between applications, your drive train lasts longer. Very good performer in extreme cold conditions.

(MR) Micro Resistance Polymer Technology – is the ultimate in protection & performance for cup and cone bearings, cartridge bearings, headset bearings, suspension forks & shocks. With several compounds used in aerospace, Pro X formula is lighter viscosity while maintaining higher protection then other greases. Pro X MR Grease has less than 3% VOC's. Pro X MR Grease uses polymerization to create a barrier of grease at the contact points which reduces wear, provides corrosion protection and is waterproof. Designed to have the correct tact for bearing to roll and not skip that creates a flat spot. Dumonde Tech's Pro X Liquid Grease can be used to thin the viscosity of Pro X MR Grease. Does not become sticky due to age and oxidation like inexpensive greases will. Our MRCC Micro Resistant Complex Compounds have been in development for over 10 years by Dumonde Design Group. MRCC technology provides premium lubrication by reducing friction better than other lubricants. Lighter viscosity while maintaining high protection. The increase in adhesion creates higher film strength. Originally developed for our motorsports lubrication, MRCC, is incorporated into our revolutionary Pro X bicycle lubricants. Benefits: - MR GREASE reduces resistance and reduces watts used. - MR GREASE is very durable through all riding conditions. - MR GREASE is waterproof. - MR GREASE is safe on all parts of a bicycle. - MR GREASE has no shipping restrictions, can be sent anywhere in the world by air or ground. - MR GREASE has <3% VOC's.

Dumonde Tech worked diligently on our next generation of bicycle chain lubricant for several years. Our Micro Resistant Complex Compounds (MRCC) had been in development for over 10 years. Originally developed for our motorsports lubrication, MRCC technology creates a lighter viscosity while maintaining high protection, reducing friction, and increase in creating much higher film strength than common, traditional technology. PRO X REGULAR Bicycle Chain Lubricant Everyone who has tested or raced using PRO X reports that performance is better than any other lube they have ever used. Even those riders that use our Standard Lite and Original chain lubes. A bold statement even for us to claim, but comes from years of technology, formulation, and testing. PRO X REGULAR brings the aspect of polymerization and MRCC oils that by design migrate for complete wetting of the surfaces. Benefits: - MRCC technology creates an extremely low friction bond. - A dry lubricant that does not attract dust and dirt. - Watts. Very little effort is used to move your bike parts. - 10 times higher lubricity than Teflon. Ceramic lubes? Catchy hype. - Waterproof which will not wash off. - Drive train stays clean, lasts longer, and runs silent. - Extremely durable, outlasts all other chain lubes in any condition. - Tamely scented. - Applied sparingly for the best results and increased value. - Can be shipped around the world via air freight and ground. PRO X REGULAR is the heavier version to our PRO X LITE chain lubricant. PRO X REGULAR is ideal for Mountain Bike, Cyclocross, and all extreme condition, while maintaining a clean drive train. PRO X REGULAR can be used on all cables, pivots points and seals. Safe on plastic, rubber, and all seal materials. The product is designed to not harm your components. Our products are engineered to perform with minimal "carbon footprint" by not washing off in water, used sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in the extreme cold conditions.

Recommended by DT Swiss for lubrication of star-ratchets on all DT Swiss hubs. - Molykote tp 42 with 5% mineral oil added to mixture