Accessories

Mid Cobber Twinpack Front and Rear lights produce an incredible 330º of light, so you'll be clearly seen from all angles. In an increasingly busy world, these bike lights are brilliantly effective at attracting attention and helping keep you safe on the road. Packing 320 lumens for the front and 170 lumens for the rear, the Mid Cobber is seriously bright. The Cobber has integrated USB recharging, is 100% waterproof and you can program the settings using the Modemaker app. It mounts with tool-less removable silicone straps for bars/seat posts 22 – 32mm+ diameter with magnetic mount (aero Mount also included). If you are looking for the best front and rear commuter bike light around, look no further. - Light modes: Max, Mid, Steady Pulse, Flash, Rolling Flash, Side Flash, Disco Flash, Eco Flash come pre-programmed - LEDs: Efficient Chip on Board (COB) LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode - Integrated USB plug: No charging cable required, plugs directly into USB ports & is designed to be exposed to the elements - Charge time: 4 hours (LED will turn off when fully charged) - Battery: USB Rechargeable Lithium Polymer - Accessories included: Standard Mount, Aero Mount, 3x interchangeable straps for bars/seat posts 22-27mm / 28-32mm+, and USB extension - Dimensions: 62 x 33mm - Weight: 44g

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? The Oi Luxe is a bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Oi Luxe is luxe in every sense of the word. Its CNC machined ringer and brass dinger, stitched 'vegan' leather shim, and metal injection molded stainless steel make it a pleasure to have on your handlebars. - Fits 23.8 – 31.8mm handlebars - Weight: 46.5g

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? The Oi Luxe is a bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Oi Luxe is luxe in every sense of the word. Its CNC machined ringer and brass dinger, stitched 'vegan' leather shim, and metal injection molded stainless steel make it a pleasure to have on your handlebars. - Fits 22.2mm handlebars - Weight: 31.5g

We understand that your bike is a prized possession and leaving it unattended, even when secured, can be risky. Scout provides unparalleled bike security by combining both an extremely loud 85db bike alarm function with a highly accurate bike finder, using Apple’s ‘Find My’ app. The future of bike security is here. Once armed, any movement of a Scout fitted Bike will trigger the motion-sensitive audio alarm discouraging any further movement and alerting the bike’s owner, both by the sound of the alarm and via a notification that is automatically sent to the owner’s iPhone (when in Bluetooth range). Then in a scenario where a bike fitted with Scout is not where the owner has left it, it can be quickly located using Apple’s network via the ‘Find My’ app. - Compatible with iOS only - Motion-sensitive 85 db audio alarm for immediate deterrence - Can be located quickly using Apple's 'Find My' app - Operated using Knog's iOS app - Mounts to standard water cage braze-ons - Can be mounted under water cage for discretion - Use supplied anti-tamper screws to mount securely - Neon silicone cover provided to advertise security device (if desired) - Arm / disarm using button (within 1.5 m) on app within bluetooth range - LEDs show alarm status & battery charge - USB-C rechargeable with 2 to 6 month battery (pending usage) - Low battery notifications when you have just 20% remaining - Water resistant IP66 rating (wash-proof) - Weighs just 25 grams - USB-C charging cable not included If you want peace-of-mind that you've done everything you can to secure your bike, Scout Bike is an essential piece of kit.

Take Bike Security to Another Level Once armed, any movement of a Scout fitted Bike will trigger the motion-sensitive audio alarm discouraging any further movement and alerting the bike’s owner, both by the sound of the alarm and via a notification that is automatically sent to the owner’s iPhone (when in Bluetooth range). Then in a scenario where a bike fitted with Scout is not where the owner has left it, it can be quickly located using Apple’s network via the ‘Find My’ app. -Compatible with iOS only Motion-sensitive 85 db audio alarm for immediate deterrence -Can be located quickly using Apple's 'Find My' app - Operated using Knog's iOS app. Mounts to standard water cage braze-ons. - Can be mounted under water cage for discretion. Use supplied anti-tamper screws to mount securely - Neon silicone cover provided to advertise security device (if desired) Arm / disarm using button (within 1.5 m) or app within bluetooth range LEDs show alarm status & battery charge USB-C rechargeable with 6 month battery life (cable not included) Water resistant IP66 rating (wash-proof) Weighs just 25 grams If you want peace-of-mind that you've done everything you can to secure your bike, Scout is an essential piece of kit.

Made of Titanium Tubing 3-bolt mount Includes two 20" Voile Straps (Orange)

- The 2.0 Seat improves on the original Shotgun Seat with the addition of a quick release mount, 2 adjustable leg lengths, and more rubber protection. - With your child riding shotgun, you’ll help foster a love of the outdoors and a passion for riding. The only problem you’ll have is getting them off it. - Designed for children 2 – 5 years (up to 22kg or 48lb) - Quick release for super fast install, removal and swap between bikes - Adjustable width and angle to fit all mountain bikes (not including e-bikes)

Jandd Rack Packs feature 3M reflective trim and 1/2" foam for support and insulation. - 3M reflective trim and light mount - Recommended for rear mount only - 1/2" foam provides support and insulation - Attach to rack via hook-and-loop straps at corners and webbing at the middle - Expandable and has large side pockets

- Two bleed kits with enough compatibility options for almost any job in the shop! - Innovative free-motion bleeding valve provides 360° functionality - The Mineral oil kit (-02) includes adaptors for bleeding Shimano, Magura, Tektro and Giant brakes, and Rockshox Reverb - The DOT oil kit (-03) includes adaptors for bleeding Avid, Formula, Hayes and Hope brakes

Accessorize your bike in a way that announces your presence in style. The omni-directional rotating top produces a clean, clear, loud ring. - Fits handlebars with 22.2mm - 31.8mm (.87-inch - 1.25-inch) outside diameters - Dome Diameter: 44mm (1.6")

Ultra-lightweight lockable security tie with reinforced steel core. Z LOK’s unique double-ratchet design fastens while locking, providing super-convenient added protection for use on car racks, with accessories and other outdoor equipment.

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

Greenfield's Stabilizer Rear-Mount Kickstand attaches to the rear chainstay of the bicycle so it's perfect for bikes that won't accept regular kickstands like mountain bikes. It comes complete with an extra wide rubber foot for superior stability and won't interfere with pedal action or rear derailleur cables. This is the stand of choice for law enforcement bike patrols throughout the U.S. - Fits tube sizes up to 7/8" in diameter - Certified Non-Corrosive Casting - Snap Action Mechanism - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)

These threaded 16-gram cartridges can be used with all Genuine Innovations inflators that have a 3/8-inch-24 thread.

20 grams of Genuine Inovations' exclusive size CO2 cartridge. Specifically designed for your larger volume 29ers, mountain and fat bike tires. These non-threaded CO2 cartridges work great with the Ultraflate (#G20310) and Full Metal Jacket (#G20440) inflators. Available in a 2-pack or 6-pack!

Complete two tasks with one cable using Garmin's charging/data clip. Connect the cable to your computer's USB port to recharge your Forerunner and to transfer data to and from your computer. This cable also pairs with an optional AC adapter (sold separately).

Need to give your bike some quick attention before you head out the door? Give it a quick shot of Finish Line's 1-Step Cleaner And Lubricant. It loosens and removes grime, while at the same time laying down a thin layer of low-friction lube that reduces drivetrain noise and premature component wear. Keeping your bike running smooth has never been easier!

Designed to leave zero residue after application, Finish Line’s Bicycle Disc Brake Cleaner displaces any moisture built up on the pad or rotor, resulting in improved and predictable braking, and reduced brake squeal. With the unique characteristic of being acetone free, Finish Line’s Bicycle Disc Brake Cleaner is strong enough to clean the dirtiest rotors, yet safe enough to use around paint, carbon fiber and plastic parts. - Engineered to rapidly clean disc brake rotors and pads - Acetone-free formula

Finish Line's DOT 5.1 Brake Fluid is a high-quality fluid for maximum life and braking power. It exceeds the most stringent 5.1 specs and is compatible/mixable with all DOT 3, 4 or 5.1 spec'd systems. It also features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

The industry's original and most versatile dry-style bicycle lubricant is now formulated with high-performing nano-ceramic boron nitride. This Non-Stick Ceramic Technology is 100% fluoro-free, sets up with a dry ‘wax-like’ film, attracts less dirt and grime, and delivers a low coefficient of friction over long re-lubrication intervals. Dry Lube is especially recommended for riding on or off-road in dry, dirty, dusty environments, yet it holds up well in moderately wet conditions. Dry Lube can also be used on derailleurs, shifters, cables, and brake pivot points. Finish Line's Dry Lube provides optimum drivetrain efficiency without attracting an excessive amount of abrasive contaminants. Features: - Formulated with Non-Stick Ceramic Technology - Quickly sets up dry and clean - Low surface tension - 100% Fluoro-free Benefits: - Lowers friction, improves pedaling efficiency, and reduces wear - Minimizes the attraction of abrasive contaminants - Easily penetrates chain pins and coats pivot points - Meets the highest standards of biodegradability

Finish Line's Dry Lubricant with Teflon keeps your bike running silky-smooth rain or shine. It's very thin yet extremely durable thanks to its synthetic oils and Teflon particles. Great for your chain, cables, cleats and springs, its dry surface texture minimizes the accumulation of dirt and grit. Plus, it's biodegradable. - Great for dry, dirty and dusty environments. Attracts less grime and runs clean - Holds up well in moderately wet conditions - Can be used on derailleurs, shifters, cables and brake pivot points - Finish Line's most popular and versatile lubricant

E-Bike Cleaner is formulated to remove grit and grime from frames, wheels and components of e-Bikes. To ensure a clean e-Bike while not damaging expensive electronic components, Finish Line engineered a clinging foam cleaner that is gentle, noncaustic, leaves no streaks, and requires no water rinsing. Finish Line’s e-Bike Cleaner is an ideal complement to any dealer specializing in e-bike sales and service.

E-Bike Chain Lube is designed to handle the unique requirements of electronic assist bicycles. E-Bike chains are exposed to higher torque and wattage loads. With this in mind, Finish Line engineered a light wet lube with unique extreme pressure additives to ensure that the lube stays within the premature wear and protecting against rust and corrosion. Finish Line’s E-Bike Chain Lube is an ideal complement to any dealer specializing in e-Bike sales and service.

Finish Line's E-Shift Groupset Cleaner is specially formulated to keep your sensitive and expensive electronic drivetrain clean and safe. It quickly and safely removes grit, grime and moisture from electric shifting drivetrain components, including the front and rear derailleur, derailleur pulleys, chain, cassette and even the crankset. E-Shift is safe and will not harm the wires or electronics. Plus, it dries in minutes leaving the drivetrain parts clean, and with no rinsing required.

The Easy-Pro Brush Set includes 5 different brushes that make easy work of all bike-cleaning jobs. Use them to remove mud, dirt and road grime from your frame and components. The package comes with a features-and-benefits guide that explains the multiple uses of each brush. Also included is a chain for hanging the brushes when they're not in use.

Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.

Finish Line's Gear Floss is the ultimate detailing tool, perfect for cleaning your cassette, chainrings, derailleur pulleys, hubs and all those hard-to-reach nooks and crannies. Made with microfiber, it works by attracting and capturing dirt, grease and particles inside its star-shaped grooves. Each package has 20, 20-inch-long ropes that are washable and reusable.