Filter By:
Parts & Accessories
$244.99
The new DN300 Built-In type battery features the same waterproof design that Di2 users have loved for generations. Now with 3 ports, it delivers stable power to Shimano's 12-speed road derailleurs (and shifters if a fully wired option is selected).
- Compatible with thinner next-generation electric wire SD300 and systems after R9250/R8150 series
- Li-Ion type
- Capacity: 500 mAH |3.7Wh (± 2000km autonomy)
- Rated voltage: 7.4V
- Charges through RD-R9250 |RD-R8150 rear derailleur using EW-EC300 Di2 Charging Cable (sold separately)
- Fixing small parts included
- Weight: 52g
$71.00
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete.
- Finish: Black
- Compatibility: SRAM RED eTap
$87.00
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs.
- Up to 1000 kilometers of riding per charge
- Weight: 24g
- Finish: Black
- Compatibility: SRAM RED eTap
$89.99
- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem
- Made in the USA
- Material: 6061 Aluminum
- Weight: 24g
- Outside Diameter: 26.0mm
- Stem Size: Threadless 1-1/8"
$42.99
Complete two tasks with one cable using Garmin's charging/data clip. Connect the cable to your computer's USB port to recharge your Forerunner and to transfer data to and from your computer. This cable also pairs with an optional AC adapter (sold separately).
$36.99
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
$30.00
Securely holds your Turbo Connect Display/Speedzone 2 computer.
- Specialized Turbo Connect Display mount.
- Left- and right-side compatible.
- Mountain bike design situates a CPU above stem.
- Fits 35mm handlebars.
$30.00
Securely holds your Turbo Connect Display/Speedzone 2 computer.
- Specialized Turbo Connect Display (TCD)/Speedzone 2 Display mount.
- Left- and right-side compatible.
- MTB-style above-the-stem mount.
$30.00
Securely holds your Turbo Connect Display/Speedzone 2 computer.
- Specialized Turbo Connect Display (TCD)/Speedzone 2 Display mount.
- Left- and right-side compatible.
- Road-style above-the-stem mount.
$65.00
Our patented ANGi sensor calls for help when you can’t. In fact, it’s the first device to protect you before, during, and after a crash. It does this through a pairing with our Specialized Ride App for iOS or Android devices. And if it detects a crash, it commences a countdown that, if you’re ok, you can stop and keep riding. If, however, ANGi determines that you’re in need of help, it’ll send an alert to your selected contacts with your last known GPS coordinates and a message that you’re in need of help. What about if you’re out of service coverage? ANGi has a plan for that. Just set your estimated ride time before you head out when you know that your ride will take you out of range. All you need is an active data signal when you start your session. And if you haven’t completed your ride within that time frame, ANGi will send a notification to your contacts with your last uploaded location.
- ANGi is a ride tracker, crash detector, and safety beacon.
- Includes a one-year subscription to Specialized Ride Premium app.
- Detects and reports potentially dangerous helmet impacts to the Specialized Ride app, which notifies your emergency contacts and sends them your most recent GPS coordinates.
- Additional premium features include start ride notifications and ride-time alerts.
- Attaches to Specialized ANGi-ready helmets.
- Approximate six months' battery life on a 2032 coin cell battery.
- Weight: 10 grams w/ battery
- Two-year sensor warranty
$15.00
Kit containing all replaceable items for the Specialized power meter pod.
- White silicone O-ring.
- Two M3x5 stainless steel screws.
$290.00
Charge your Specialized Turbo battery with this high output, custom Li-ion charger.
• Custom Specialized Li-ion battery charger
• Output: 42V4A
• Compact design while delivering huge power
• With Rosenberger plug and light indication of the charging status
$7.00
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705.
- Glass-filled nylon, stainless steel Torx T25 bolt
- Weight: 20g
$188.00
- Shift buttons mounted to the end of a bar plug
- Included wire connects to Blip Box
- Fits bars with 19 - 20.5mm inside diameter
$172.00
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want.
- Limitless remote shifting positions for drop and aero bars
- Wired shift buttons can be positioned however the rider prefers
- Connect to Blip Box or drop bar eTap levers
- Compatible with SRAM RED eTap shift/brake controls
$24.00
- Use to keep Blips in place on handlebars
- Fits 31.8mm round portion of drop bar
- Clamp mounts directly to bar outside of tape zone
- Ideal for use with thumbs or index fingers while hands are on the tops
- Right and left specific, just like Blips
- Weight: 12 grams (for pair)
- Material: Polypropylene
- Compatibility: 11-speed
- Recommended Group: SRAM RED eTap
$33.00
External Blip mount for aero extensions and base bars
- 360 degree rotation for adjustment
- Aero use only to fit 22.2mm OD bar 65mm in length
- Fits all Zipp aero extensions and base bars
- Blips not included
- Weight: 57 grams for pair (does not include Blip)
- Material: Polypropylene + TPE
- Compatibility: 11-speed
- Recommended Group: SRAM RED eTap
$43.96
MORE POWER, WITH SECURITY, MORE COMFORT.
Water-repellent mobile phone case for the bicycle handlebar
Everything in view - in any weather: The smartphone case COM/SMARTBAG can be attached to any COMPIT cell phone holder thanks to the adapter. A special COMPIT cover is therefore not necessary. The large transparent window ensures that the touchscreen is easy to operate, and it is also possible to unlock the cell phone with a fingerprint directly through the film. The lower extra compartment not only offers additional storage space for keys and money, but also space for the COM/UNIT power bank for inductive charging of the mobile phone while driving.
For attachment to the COMPIT mobile phone holder system
When touring in rough terrain, it is advisable to charge the cell phone with a cable. Optionally, the COM/UNIT can also be attached directly under the SMARTBAG to the COMPIT smartphone holder. In this case, the mobile phone must always be charged via cable through the cable guide. Suitable for smartphones with a maximum size of 155 x 80 x 15 mm.
- Only compatible with the COMPIT system
- Extra storage space
- Water-repellent
- Can be operated through foil
- For all common smartphones
- Weight: 115g
$28.79
COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone.
- For iPhone 11 Pro
$28.79
COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone.
- For iPhone 6+/7+/8+
$28.79
COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone.
- For iPhone 6/7/8
$28.79
COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone.
- For iPhone X/XS
$28.79
COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone.
- For iPhone XR/11
$28.79
COMPIT Universal-Cover Adapter (or COMPIT Phone Covers) are needed to securely mount the phone to the COMPIT unit. The adapter with the special mounting device allows the phone to be docked into the COMPIT system. The cover attaches to the user's favorite phone case with self-adhesive 3M film.
$9.99
Each GPS unit comes with a Standard GPS Mount. Included are two sets of o-rings (two diameters), plus a backup o-ring in each size, a rubber shim and an X-Lock composite mounting bracket. The rubber shim supports the X-Lock mount which is engineered to attach at any 9° angle and still allow the computer to be mounted forward. The two super durable o-rings secure it to the bar, and the patent-pending X-Lock design will prevent the computer from being knocked out. The X-Lock securely fastens the GPS computer to the mount by pressing down at a 45° angle and rotating it forward until it "locks" into place.
$25.99
The Forward Mount is a hinged handlebar mount featuring a stiff and durable composite matrix construction with secure X-Lock and an integrated rubber shim. With a pressed-in stainless steel nut and 3mm hex stainless steel bolt, this mount's sleek, lightweight design positions the GPS computer in front of the stem for better visibility and improved aerodynamics. The X-Lock is a secure and reliable mounting feature integrated into the Standard GPS Mount and the Forward GPS Mount. It safely locks in the computer for worry-free riding over any type of terrain.
$5.99
Easily secure your GPS cycling computer to your favorite bike.
Includes:
- Two sets of O-rings (two diameters)
- A backup O-ring in each size
$164.99
KMC's digital ChainChecker is the most accurate tool for checking your chain’s elongation.
- Measures up to 2.5mm elongation
- Fits all chains including 11 speed
- Handy electronic device
- Stainless hardened metal body
$29.99
Lights, Camera, You Name it
The Accessory Mount is a great solution for attaching your GoPro-style mount to your helmet, seatpost, handlebar, selfie-stick or just about anything else. The banded system offers easy attachment, the 270 degree rotation helps you position your camera so that you can get the shot every time, and the omni-directional breakaway feature will take the hit in a crash (possibly saving your camera equipment). With the Accessory Mount, your imagination is the only thing holding you back.
Features
- Omni-directional breakaway, 270 Degree Rotation
$40.49
The BlueGiga dongle gives Rouvy, CycleOps' virtual training software, the ability to seamlessly connect to Bluetooth devices and sensors. The BlueGiga dongle contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including CycleOps smart indoor bicycle trainers and power meters made by the folks at PowerTap.
Most importantly, the BlueGiga dongle is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers.
- Bluetooth dongle for PCs to work with Rouvy
- Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers.
- Works with PC desktops and laptops.
Page 1 of 2
Next page