Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Fenders

$109.99
Mudguard in pure form: EDGE AL guarantees city and trekking cyclists ideal splash protection on the road. This aluminum mudguard mounts close to the tire and offers great stability, although it is only attached at three points. No load rack is necessary to attach EDGE AL. With a purist matte-black look and an angular profile, EDGE AL integrates itself almost invisibly into the frame. - Urban fender set - Sturdy aluminum profile design for urban bikes - Black U-stay - Includes accessory parts and stays - Weight: 568g
$54.09
The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 27.5+ and 29-inch wheel compatible
$54.09
The Shockblade 26/27.5-inch is a clip on front, high-quality 2-component fender for mounting on the fork of 26-inch and 27.5-inch mountain and trekking bikes. - Virtually unbreakable high quality dual compound plastic - Hidden chuck cone adapter which is fitted once during first assembly - Easy quick-release fastening - Optimized dirt protection - Fits almost all suspension forks - 26-inch and 27.5-inch wheel compatible
$54.09
The Shockblade 27.5+/29-inch is a clip-on front, high-quality 2-component fender for mounting on the fork of 27.5+ and 29-inch mountain and trekking bikes. - Virtually unbreakable high quality dual compound plastic - Hidden chuck cone adapter which is fitted once during first assembly - Easy quick-release fastening - Optimized dirt protection - Fits almost all suspension forks - 27.5+ and 29-inch wheel compatible
$29.99
The Fender Flute fits inside most forks and attaches to standard front fender tabs for mounting fenders closer to the wheel. - Especially helpful for fender mounting on suspension-corrected forks - Threaded M6 holes at 10mm intervals for fine-tuning fit - Bolts and lock washers included
$75.00
Keep the road grime and water off your clothes with a durable fender set made specifically for the Roll. No-fuss installation means you can add them quickly and easily, so you're always ready to ride. - Valuable and durable plastic fender set for Roll. - Designed for 650b x 2.3" tires. - Stainless steel fender stays and hardware. - Rear fender supports Plug and Play frame mounting. - Front: 660mm / Rear: 1050mm
$54.99
A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Weight: 752 g / 1.66 lbs (pair) Construction - Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting System - Below: Mount to Quick-Release skewers via included AXLE-RUNNERS - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting
$39.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it's longer and fatter than the regular X-tra Dry so it works great with 29ers and fatter 700c tires. It's also a breeze to attach with its easy-to-adjust seatpost mounting strap.
$22.99
The X-Board is an innovative clip-on fender with rubber fasteners for downtube mounting. - Adjustable soft rubber cable-spacers, ideal to adapt on almost any tube profile - Robust rubber fasteners - Dual compound-softspoiler
$15.65
Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.
$18.49
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 35cm / 13.8" (in length) - Weight: 68g / 2.40oz
$23.00 - $31.00
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation, so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Deep side skirts protect stanchions and dust seals from rocks and debris
$14.99 - $31.00
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Designed specifically for RockShox forks - Deep side skirts protect stanchions and dust seals from rocks and debris - Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed
$86.83
The Stingray mudguards supplement SKS's Bluemels range in the accustomed quality with modern colors in a matte design. First-grade plastic with an aluminum core for high-impact resistance. The stays feature quick-mounting fixed end caps. These fenders feature an elegant matte finish, edge protectors, and an automatic stay release safety system for the front. - Same features as the Commuter II fenders with the addition of colors and blacked out V-Stay - Fits tires 700 x 28-37mm - 45mm profile width
$11.19
- Rubber straps - Fit Raceblade, Mud-x - Set of 8
$24.99
This super-lightweight (45g) and discreet mudguard protects your face (and your fork seals) from mud and water. Made of super-soft material, it fits 26", 27.5", and 29" bikes and is compatible with most forks. Thanks to the included zip ties that wrap around the fork bridge and fork legs, the Flapguard sticks close to your bike even during extremely aggressive riding. - Also compatible on rear side of frame
$44.12
Keep water and mud off you with SKS's Shockboard front fender! It's super light and nearly unbreakable so you know it's ready for off-road action. Plus, it works with most rigid and suspension forks as well as disc and linear-pull brakes.
$63.50
The new EVO bolt-on fender is designed around the latest FOX 36 and 38 forks, to avoid the problem of the crown hitting the mudguard at full compression (minimum Fork Offset: 44mm). Fender bolts directly to the back of the fork brace. Supplied with rubber pads, bolts, washers and hex key to install to your FOX forks. Compatible with older (2017) onwards FOX 34 & 36 forks which have bolt holes in the brace. Also compatible with the fork brands below (separate adapter kits are required): - Rock Shox Zeb - Rock Shox Recon Gold or Silver 35 - DVO Onyx SC, Sapphire, & Diamond - Ohlins RXF 38 (2019+) & DH - Total length: 515mm (Rr extension 330mm, Fr extension 185mm) - More mud clearance - No more crown fouling at full compression - Stiffer, optimum length, not too short, no longer than needed - Designed and made in the UK from recycled PP - 125g
$119.99 - $149.99
These fenders feature an art-deco, zeppelin profile and are available in high polished silver and smooth Noir. They're 52mm wide for 650b wheels with tires up to 44mm wide. They are 52mm wide for 700c and 27" wheels, and work with tires up to 42mm wide. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed - eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build. Read the instructions to make sure your frame and fork has the correct mounts and hardware needed.
$99.99
The ultimate set of mudguards for fat tire bikes offering all-round mud protection. Front is mounted easily under the down tube by high-performance straps and the rear fits to the seat post in seconds with the proven tool-free SKS quick-release Powerstrap attachment system. The two-hinge arm in the rear allows perfect adjustability to the geometry of your bike.
$80.00
Building on the award-winning, tried and tested Rear Mudhugger design, the new MK2 fender has added 3 significant improvements: 1. Now attaches with reusable velcro straps to make fitting and removing a matter of seconds 2. Where the fender 'sits' on the seatstays we have incorporated rubber inserts which aid grip and improves damping 3. A new push fit BB extension piece, to protect the BB area from debris build up. This has been designed to be as thin as possible so that it can be easily trimmed to suit most bike rear triangle designs The MEDIUM version is designed for bikes with a seatstay angle from 34 degrees down to 27 degrees. Can be fitted to 'most' bikes with disc brakes, even with external cables and hoses. - 690mm long x 105mm wide Comes supplied with: - x2 helitape sheets - x4 velcro straps - x2 rubber damping strips - x1 BB extension (230mm long x 80mm wide) - Designed and made in the UK from recycled polypropylene - 280g (w/o fittings)
$24.99
This super lightweight (45g) and discreet mudguard protects your face from mud and water. Made of super soft material it fits to 26", 27.5" and 29" bikes and is compatible with most forks. The Flapguard Mudguard sticks close to your bike even in extremely aggressive riding due to the supplied zip ties, which wrap around the fork bridge and fork legs. Mud is also kept off your fork seals. Also compatible on rear side of frame.
$99.99
- Rugged 6061 aluminum construction is corrosion resistant - 100mm mudflaps provide ultimate coverage and are double-riveted for durability - Hardware is all stainless-steel and pre-installed for hassle-free mounting - V-stays for added stability - Disc brake compatible - 50mm width - Release Tabs on front fender for added safety - Meets EN test standards
$54.09
The X-Guard is a universal downtube fender for any wheel size. It is attached using two straps on the lower bar (downtube), making it compatible with fat bikes and bicycles with oversized tires for all-around mud protection. It also protects E-MTB batteries from dirt, splashes and flying rocks. The straps are extra long and can be shortened as needed, making X-Guard suitable for any frame shape and all common battery models.
$106.77
The ultimate clip-on mudguard set for road bikes for tire widths up to 25mm. Its smart, double-hinged quick release fitting system also fits aero forks and is also compatible with disc brakes, direct mount brakes, and thru axles. Mudguards can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. The superlight extra long mud flaps give additional spray protection. In addition to using the quick release rubber straps it can also be fixed in place with zip ties. Paintwork protection film for the frame is also included. Disc brake compatible: Please be mindful of the brake wire.
$149.99
The Bluemels 75U Long Fender Set is a classic full fender, especially suited for 29er bikes. As with all SKS Bluemels, the fenders are robust and rigid with an aluminum strip sandwiched between plastic sheathing. A safety front fender release system is included and should be used. The Long version offers extra protection for linkage and suspension. - 29er/700c/650B up to 2.5" - 75mm wide profile must fit through seat stays and fork legs - Fender eyelets or frame clamps (sold separately) are necessary for mounting - Stainless steel hardware - Compatible with disc brakes - Measurements: 680mm front fender / 1120mm rear fender - Weight: 820 grams - Made in Germany
$102.00
The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support. - Compatible only with disc brakes - Includes hook-and-loop fasteners and tension rubber
$74.99
A sturdy, secure and highly visible set of full-coverage fenders designed to fit more bikes than any other full-coverage fender. Easy to install and easy to adjust, Rainrunners are a perfect way to install fenders on bikes that are not designed to accept fenders. Weight 610 g / 1.34 lbs (pair) Construction - Alloy/Engineering plastic FRAME-RUNNER mounts - 360 degree visibility 3M Reflex sides - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting system - Below: Mount on frame or fork via included Frame-Runners - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included FRAME-RUNNERS mount to almost any frame or fork to ‘create’ eyelets - FRAME-RUNNERS can be installed and removed easily via included O-rings, or permanently mounted using included zip-ties - 3M Reflex side panels offer 360 degrees of reflective visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Extended mudflaps keep feet dry and reduce rear spray - Sold pre-assembled for quick mounting - Compatible with most disc-brake-equipped bikes
$69.99
Topeak's DeFender M1/XC11 fender set offers durable rain and mud protection on wet and sloppy rides. They're incredibly light and easy-to-use, too. The front installs easily to any standard fork and the rear connects to most seat posts. Their quick-release attachments allow the DeFenders to be installed and removed in seconds.
$74.99
A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Weight: 652 g / 1.44 lbs (pair) Construction - Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting System - Below: Mount to Quick-Release skewers via included AXLE-RUNNERS - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting
Page 1 of 3 Next page