Lubes/Cleaners

Finish Line® Speed Degreaser™ is the fastest way to clean a bicycle drivetrain. Dry-degreasing technology requires no water rinsing as it evaporates rapidly after application to leave no residue. It's innovative turbo sprayer uses mechanical agitation to blast away contaminants from metal components. Speed™ is formulated with advanced solvents to quickly breakdown grease, grime, dust, and dirt. For most applications Speed™ requires no additional brushes or tools. Speed™ leaves no residue so lubricants can be applied to the chain immediately after application. • Dry-degreasing technology requires no water rinsing • Innovative turbo-sprayer blasts away contaminants • Advanced solvents breakdown grease and grime • Dries rapidly to leave no residue • Leaves bicycle chains clean and ready for fresh lubrication

Need to give your bike some quick attention before you head out the door? Give it a quick shot of Finish Line's 1-Step Cleaner And Lubricant. It loosens and removes grime, while at the same time laying down a thin layer of low-friction lube that reduces drivetrain noise and premature component wear. Keeping your bike running smooth has never been easier!

For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.

SRAM's Butter Grease is a Slickoleum lube recommended for fork bushings, Roam and Rise wheel rear hub pawls and Reverb seat post service. Keep your parts working smoothly!

A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The Chain Gang includes: - CM-5.3 Cyclone Chain Scrubber - GSC-1 GearClean Brush - 8 oz. bottle of Bio ChainBrite The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.

Finish Line's Super Bike Wash quickly cleans dirt, clay, road grime and chain gunk off your bike. Five different cleaning agents work together to create a high-speed cleaning system. Three different rust and oxidation inhibitors protect metal surfaces to prevent rusting. It's safe for all bike surfaces.

Finish Line's Pro Chain Cleaner Rebuild Kit contains all the parts you need to bring your Pro Chain Cleaner (sold separately) back to like-new condition. This kit includes three new brush wheels, new axles, and two new scrubber pads.

(MR) Micro Resistance Polymer Technology – is the ultimate in protection & performance for cup and cone bearings, cartridge bearings, headset bearings, suspension forks & shocks. With several compounds used in aerospace, Pro X formula is lighter viscosity while maintaining higher protection then other greases. Pro X MR Grease has less than 3% VOC's. Pro X MR Grease uses polymerization to create a barrier of grease at the contact points which reduces wear, provides corrosion protection and is waterproof. Designed to have the correct tact for bearing to roll and not skip that creates a flat spot. Dumonde Tech's Pro X Liquid Grease can be used to thin the viscosity of Pro X MR Grease. Does not become sticky due to age and oxidation like inexpensive greases will. Our MRCC Micro Resistant Complex Compounds have been in development for over 10 years by Dumonde Design Group. MRCC technology provides premium lubrication by reducing friction better than other lubricants. Lighter viscosity while maintaining high protection. The increase in adhesion creates higher film strength. Originally developed for our motorsports lubrication, MRCC, is incorporated into our revolutionary Pro X bicycle lubricants. Benefits: - MR GREASE reduces resistance and reduces watts used. - MR GREASE is very durable through all riding conditions. - MR GREASE is waterproof. - MR GREASE is safe on all parts of a bicycle. - MR GREASE has no shipping restrictions, can be sent anywhere in the world by air or ground. - MR GREASE has <3% VOC's.

Why We Make This You wouldn't make your own pasta from scratch and then pour jarred sauce on it. So yeah, the kind of people who make their own bearings also formulate their own lubricants. It's kinda who we are. Why You Want It Chris King Silver Grease is a nano-particle lubricant optimized for hub and bottom bracket bearings. A nano lubricant is one that is lubricious (a real word) at its molecular level. With Silver Grease, we struck a balance between providing the lowest possible drag and still providing excellent weather resistance. It's compatible with both our steel and ceramic bearings.

Pro X Bio-Bike Cleaner Concentrate is powerful but at the same time safe on all parts of a bicycle. 100% Bio-Degradable. Non-toxic. Water Soluble. Eco Kind. Low Scent. Rinses Clean. Leaves no residue. No water spots. Long-lasting performer and efficient in bicycle ultrasonic and aqueous parts cleaners (heated or cold). USES: Refilling spray bottles. Our in-line hose Mixing Unit. Bucket. Small parts cleaning containers. Chain cleaning machines. Using a hose end sprayer or pressure washer, you will experience sudsy, not foamy. Ultrasonic bicycle parts cleaners. Aqueous bicycle parts cleaning tanks (cold or hot). Highlights: - Efficient. Performance-based - 100% Biodegradable - Non-Toxic - Safe on all parts of a bicycle - Water Soluble - Use in Ultra Sonic parts cleaners - Use in Aqueous parts cleaner - Leaves no residue or water spots

Dumonde Tech's PRO X Liquid Grease is a very high-performing replacement for traditional viscosity grease. PRO X Liquid Grease using our MRCC Micro Resistant Complex Compounds greatly reduces the coefficient of friction. PRO X Liquid Grease polymerizes and bonds to the surfaces which provide extremely low drag, high sheer strength, and protection. PRO X Liquid Grease will migrate to heat to provide lubrication at critical areas. PRO X Liquid Grease is highly recommended for steel and ceramic cartridge bearing. Waterproof, which protects bearings from corrosion. Hybrid (Ceramic balls, steel races) bearings are prone to corrosion and wear without a lubricant. PRO X Liquid Grease is the perfect solution. PRO X Liquid Grease essentially eliminates drag that grease-packed steel bearings experience. You will have a drag-free bearing, especially in freezing temperatures. Great for suspension fork legs, full suspension pivots, wheel bearings, roller bearing, and jockey wheels. A proven application for spoke nipple and rim interface. Can be used as a chain lube for very extreme muddy conditions of mountain bike and cyclocross riding or racing. PRO X Liquid Grease can be used with our PRO X MR Grease to add viscosity if needed. Our MRCC Micro Resistant Complex Compounds have been in development for over 10 years by Dumonde Tech Design Group. MRCC technology provides premium lubrication by reducing friction better than other lubricants. Lighter viscosity while maintaining high protection. The increase in adhesion creates higher film strength. Originally developed for our Motorsports lubrications, MRCC, is incorporated into our revolutionary PRO X bicycle lubricants. Everyone who has tested or raced using PRO X, reports that it performs better than any other lube they have ever used. Benefits: - PRO X reduces resistance and reduces watts used. - PRO X products have no shipping restrictions, can be sent anywhere in the world by air or ground. - PRO X has low VOCs.

Clean your chain in under 20-seconds with White Lightning's The Trigger. Simply close the lid of The Trigger over your chain, spray, and backpedal your chain for about three revolutions. The Trigger comes with one 12-ounce can of Clean Streak so you'll have everything you need for a clean, quiet ride.

Finish Line's E-Shift Groupset Cleaner is specially formulated to keep your sensitive and expensive electronic drivetrain clean and safe. It quickly and safely removes grit, grime and moisture from electric shifting drivetrain components, including the front and rear derailleur, derailleur pulleys, chain, cassette and even the crankset. E-Shift is safe and will not harm the wires or electronics. Plus, it dries in minutes leaving the drivetrain parts clean, and with no rinsing required.

WPL Dry Chain Lube is a premium bio-based chain lube formulated for dry and dusty riding conditions. The endurance formulate has been designed to penetrate deep into chain links to maximize pedal efficiency and facilitate gear-shifting. The biodegradable, non-toxic, and PTFE-free formula keeps the mechanic and the environment safe from harm. Class-leading surface-binding compounds create a thin film around moving chain links to create unparalleled performance for riders of all disciplines. - Premium bio-based formula made with natural ingredients - Emulsifite technology provides dynamic cleaning abilities and prevents black goop build-up - Long-lasting formula improves pedal efficiency by reducing chain wear and friction - For use on bicycle chains, shifters, derailleurs and cables - Biodegradable, non-toxic, PTFE-free formula is environmentally friendly

Finish Line's Mineral Brake Fluid is formulated specifically for bicycle brake systems requiring mineral oil. Features no compromise leading edge chemistry to provide superior fluid life and braking performance. Formulated with a low viscosity base oil to yield superior level response, pad retraction, and consistent performance through a full range of operating temperatures. Finish Line Mineral Brake Fluid was specifically engineered for use in bicycle hydraulic disc brake systems. When you are serious about getting the most out of your braking system, Finish Line Mineral Brake Fluid is a great choice. - Specifically engineered for use in bicycle hydraulic disc brakes - Provides maximum fluid life and braking performance, even at low temperatures - Prevents foaming and overheating

RockShox's PM600 Military grease is great for suspension rebuilds. It delivers excellent shock feel, and keeps your gear running at its best. • Used as an assembly lubricant for dust seals, rebound dampers, spring top caps, air springs, and compression damper top caps • 500+ degrees melting point • Soluble in suspension fluid

Shock Oil is a semi-synthetic formulation that combines the best of available oils and additives for a super suspension oil. It's fully compatible with all systems and internal components, seals and O-rings. Its viscosity stays constant as the temperature changes, so your shock feels the same whether you're roasting or freezing!

Finish Line's Citrus Degreaser was cycling's original orange peel-based degreaser and it has set the standard in bike parts cleaning since 1988. Super strong and fast-working to cut through grime and crud, it's formulated with powerful and natural citrus extracts. With Citrus your drivetrain will clean up faster and with less scrubbing whether it's covered with grease, oil or wax. Plus, you can simply rinse with water for a residue-free finish.

- A biodegradable degreaser that cuts through the toughest grime - Strong enough for the metal parts, Yet safe enough to clean parts with rubber o-rings and seals, urethane elastomers, and painted surfaces - Exceeds all federal V.O.C. and California carbon regulations - Law prohibits ORM-D materials from shipping by air

Royal Blood mineral oil is a specially formulated, low viscosity hydraulic fluid that ensures consistent performance of Magura brakes. - Doesn't absorb water - Lubricates entire braking system

Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

Peaty’s SPEED Grease runs 2.5 times faster than our assembly grease, whilst still providing long-lasting performance under extreme Loads. Perfect for use in race hubs, bottom brackets and other fast moving parts. Meeting the ultimate biodegradability OECD test 301B, our SPEED Grease has a high resistance to water wash out, excellent anti-corrosion properties and adhesion to metallic parts while remaining compatible with most other conventional greases. APPLICATION INSTRUCTIONS This product is designed for professional use only. If you’re unsure what you’re doing then please consult your local bike shop, workshop or mobile mechanic. Use in fully sealed parts only. If using to replace grease in bearings then use only with brand new bearings and seals. Attempting to strip, re-grease, and re-build old bearings will result in damaged bearing seals. Do not allow grease to contact brake disks or pads. ADHESION TO METALLIC PARTS The number one requirement for a grease is that it lubricates really well. In order for it to lubricate really well, a good grease needs molecules that flow over each other easily (less drag) and coat the metal surface thoroughly and evenly, to prevent metal-on-metal contact (which results in parts wearing). In nerd talk, our base oils have been formulated using synthetic esters with a marked polarity. Ok, who’s Ester and why is she in your oil?! Ester isn’t a woman, it’s a variant of synthetic oil! Esters are more expensive than straight synthetic oils because the ingredients all have to be collected from natural sources and then synthesized in much smaller quantities than regular synthetic oil. The number one reason to use ester oil is how well it bonds to surfaces. Ester oil has an electrochemical bond because the ester molecule is polar, sort of like a fridge magnet. It is attracted to metal and sticks like Peaty’s hand to a fresh cool pint of Yorkshire ale. Also, because of this electrochemical charge, the grease naturally distributes itself evenly over a surface since each molecule will repel away from each other - like trying to push two positive ends of a magnet together. COMPATIBILITY Peaty’s Bicycle Assembly Grease is compatible with all oils of a mineral or synthetic nature except for PAG (Polyalkylene Glycol) based products. WHAT IS ‘ULTIMATE BIODEGRADABILITY – OECD 301 B’? This is the ability of a product to be transformed into a simple element by living organisms. The OECD 301B standard replaces the obsolete CEC standard (primary biodegradability) 100% POST-CONSUMER RECYCLED TUBES Our tubes are made from 100% post-consumer recycled plastic. The recycling process is performed according to EU REACH standards using waste LDPE plastic from used plastic shopping bags and food films. KEY POINTS For use in race wheel bearings, bottom brackets & other fast-moving parts Long-lasting lubrication under extreme loads Anti-corrosion protection High resistance to water washout Readily Biodegradable 100% PCR & PIR Recycled Packaging M15 threaded cap

Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.

DOT Disc Brake Assembly Grease is specially formulated for DOT-fluid brake systems. - Recommended for lever pistons, hose compression nuts, threaded barbs, and olives

The Finish Line® No Drip Chain Luber™ is a smart tool designed to optimize the application of chain lubricants. This easy-to-use applicator ensures even coverage on every chain link, eliminating excess waste and mess. By using 50% less lube than traditional methods, the No Drip Chain Luber™ saves both time and money, making chain maintenance more efficient and cost-effective. This kit also includes a 4oz bottle of premium Finish Line® chain lubricant, ensuring top-notch performance right from the start.

LinkLube Dry is a readily biodegradable, wax-based chain lube for use in desert dry and dusty, to mildly moist conditions. Our unique formula uses a blend of waxes suspended in a water-based emulsion to give you a long-lasting, clean-running, quiet chain. Key Features - - Wax based formulation lasts longer in dry, dusty conditions as it does not attract dirt - Blue indicator dye easily shows when lube is dry and ready to ride readily biodegradable - Up to ~300km / 190miles per application (depending on conditions) - Rounded tip to the applicator cap rolls easily over the chain when applying - Unique tall and slim bottle is shaped to fit like a pen in your hand to make application easy Application - When applied for the first time, it is essential that LinkLube Dry is applied to a well-degreased and dry drivetrain. If a chain is dirty, then dirt and old lube take up space in the rollers, preventing new lube from reaching the places it needs to, and any residual oil-based lube can also result in reduced durability and premature blackening. 1. Fully degrease before applying fresh lube to ensure there is no old chain oil present. For best results use Peaty’s Foaming Drivetrain Degreaser or, in the case of brand new chains, use Peaty’s XXX solvent degreaser to remove stubborn waterproof factory greases. 2. Ensure you thoroughly rinse your chain with clean water after degreasing (degreaser is designed to eat chain lube after all). 3. Allow chain to dry thoroughly before application. 4. Apply to the inside face of the chain only. The light blue colour to the chain lube allows you to see exactly where you have and haven’t applied. 5. Keep the chain cycling for 20 seconds to help the lube penetrate fully into the pins and rollers. 6. Check for over-application. You can tell if you over-apply LinkLube dry because you’ll see the lube start to fill the narrow chain links. If this happens, just slowly cycle through your gears a few times to transfer the excess lube onto the cassette. You’ll see the lube disappear from the narrow links, leaving lube only where it’s needed on the chain. 7. Leave to fully dry so the lube goes from a light blue colour to completely clear (you’re waiting for the water to evaporate, so leaving it in the sun helps). How long it takes for the water to evaporate - and for the lube to turn clear in colour - depends on the weather conditions. This can range from just a few minutes (if hot), to a few hours (if cold and damp). for best results apply the night before. 8. Ride! Caution - Do not get linklube (or any lube for that matter!) on your brakes or brake pads.

This is RockShox's recommended cleaner for suspension internals. Handy aerosol spray degreases and conditions small parts like O-rings and seals. - Formulated with special conditioners that will not cause O-rings and seals to dry, crack, or degrade - For use on all suspension products

Born in the lab and raised between the tapes, Peaty's Link Lube is a minty fresh, triple distilled, ultra high speed chain oil for use in all conditions. Our unique formula penetrates and cleans deep inside your chain, driving out moisture, grit and grime and replacing them with unique blend of oils and waxes (Peaty's secret sauce) to lubricate and protect. Yes, you read that correctly! Peaty's Link Lube actually cleans your chain as you use it! Key Features - - Triple distilled, ultra-high-speed and minty fresh chain oil for use in all conditions - Unique ‘shake-to-awake’ two-part formula penetrates and cleans deep inside your chain, driving out moisture, grit and grime -and replacing them with a proprietary blend of oils and waxes - Clear tip to the applicator cap so lubricant can be seen filling the chamber just before it drips out - Rounded tip to the applicator cap rolls easily over the chain when applying - Unique tall and slim bottle is shaped to fit like a pen in your hand to make application easy - Triple distilled, ultra-high-speed and minty fresh chain oil for use in all conditions Application - 1. Always fully degrease your drivetrain before applying fresh lube. For best results, use Peaty's Drivetrain Degreaser. 2. Ensure you thoroughly wash your chain with clean water after degreasing (degreaser is designed to eat chain oil after all). 3. Remove as much water as you can from the chain - a quick wipe with a clean cloth will do fine. 4. Give the bottle a good shake to evenly distribute the secret sauce. 5. Apply the lube while cycling the chain backwards (eBikes will need to be pedalled forwards in a stand) ensuring every link is adequately covered. 6. Keep cycling the chain for 10seconds or so to help the lube work its way into your chain. 7. Thoroughly wipe away all excess lube from your chain using a clean cloth (excess oil on the outside of the chain will attract dust in dry conditions). Tips - 1. For wet weather conditions, leave a small amount of lube on the outside of the chain for longer-lasting protection. 2. On first use with pre-used chains, you may find that your chain turns black - this is the LinkLube driving out grime from deep in your chain. Just keep riding, degreasing, lubing and repeating until your chain runs shiny clean once more! Caution - Do not get LinkLube (or any lube for that matter!) on your brakes or brake pads.

LinkLube Dry is a readily biodegradable, wax-based chain lube for use in desert dry and dusty, to mildly moist conditions. Our unique formula uses a blend of waxes suspended in a water-based emulsion to give you a long-lasting, clean-running, quiet chain. Key Features - - Wax based formulation lasts longer in dry, dusty conditions as it does not attract dirt - Blue indicator dye easily shows when lube is dry and ready to ride readily biodegradable - Up to ~300km / 190miles per application (depending on conditions) - Rounded tip to the applicator cap rolls easily over the chain when applying - Unique tall and slim bottle is shaped to fit like a pen in your hand to make application easy Application - When applied for the first time, it is essential that LinkLube Dry is applied to a well-degreased and dry drivetrain. If a chain is dirty, then dirt and old lube take up space in the rollers, preventing new lube from reaching the places it needs to, and any residual oil-based lube can also result in reduced durability and premature blackening. 1. Fully degrease before applying fresh lube to ensure there is no old chain oil present. For best results use Peaty’s Foaming Drivetrain Degreaser or, in the case of brand new chains, use Peaty’s XXX solvent degreaser to remove stubborn waterproof factory greases. 2. Ensure you thoroughly rinse your chain with clean water after degreasing (degreaser is designed to eat chain lube after all). 3. Allow chain to dry thoroughly before application. 4. Apply to the inside face of the chain only. The light blue colour to the chain lube allows you to see exactly where you have and haven’t applied. 5. Keep the chain cycling for 20 seconds to help the lube penetrate fully into the pins and rollers. 6. Check for over-application. You can tell if you over-apply LinkLube dry because you’ll see the lube start to fill the narrow chain links. If this happens, just slowly cycle through your gears a few times to transfer the excess lube onto the cassette. You’ll see the lube disappear from the narrow links, leaving lube only where it’s needed on the chain. 7. Leave to fully dry so the lube goes from a light blue colour to completely clear (you’re waiting for the water to evaporate, so leaving it in the sun helps). How long it takes for the water to evaporate - and for the lube to turn clear in colour - depends on the weather conditions. This can range from just a few minutes (if hot), to a few hours (if cold and damp). for best results apply the night before. 8. Ride! Caution - Do not get linklube (or any lube for that matter!) on your brakes or brake pads.

Far from a load of products thrown into a re-branded bucket, Peaty’s Complete Bicycle Cleaning Kit provides all your essential cleaning products in a premium storage solution. Made from recycled plastic and with a strong aluminium carry handle, this kit contains all the key products you need to go from filthy dirty to race-ready. With a 10% saving over buying each item individually, this is a great value storage solution for your essential cleaning products. What’s included? - 1 x 1 Litre Loam Foam - 1 x 500ml Foaming Degreaser - 1 x 60ml LinkLube All-Weather - 1 x Bog Brush - 1 x Drivetrain Brush - 1 x Bamboo Bicycle Cleaning Cloth - 1 x Wham heavy-duty box with removable parts tray. Dimensions: - Overall size: 40cm (width) x 23cm x 25cm high 44cm wide including the handle. - Approx internal dimensions (when tray removed) 37cm x 19cm x 22cm height (including space in the lid section) - The box has 16cm of height underneath the removable tray.