Tools

Regular chain and component cleaning is a chore no more thanks to Finish Line's Grunge Brush. The "horseshoe" end scrubs the chain thoroughly with its compact bristles and the long bristled end provides easy cleaning of sprockets, chainrings, pedals and derailleurs. Plus, the Grunge Brush is portable enough to bring to races and weekend cycling excursions too.

At the heart of every bicycle is flush-cut housing, and cleanly cut and crimped cables. The Cable and Housing Tool manages these tasks with precision and elegance. The cold-forged, hardened CRV tool steel arms and precision-faced cutting jaws, even the stiffest housing gets a perfect cut every time. The built-in crimper perfectly secures housing ferrules and cable end-caps, and a closure latch keeps the jaws protected when not in use. These cutter-crimpers are perfect for learning bike maintenance, or for veteran mechanics. Available separate, or found in our Team Edition Tool Kit - Squarely cuts even the stiffest compression-less housing - Cold-forged and hardened CRV tool steel arms prevent flex for easier cuts - Creates perfect cable cuts, preventing fraying or damaged ends - Precision-faced cutting jaws stay sharp and prevent cable and housing distortion - Crimping tool creates capped cables without risk of damaging ends - Closure latch keeps tool closed when not in use - Overmolded file tread handles promote comfort and control during challenging cuts - Designed to work on all types of bikes - Found in the Team Edition Tool Kit

Do you like the Micro Pro/Pill tool, but need extra storage and Megaplug capability? Then this is the tool for you! Larger than a Pill but easily fits in the palm of your hand. Get one today to tackle the largest punctures and keep the ride going! Kit includes: x1, Megapill tool (dimensions: 2.59" x 1.11") x2, Megaplug repair plugs x5, Brass soft nose tip repair plugs x2, Megaplug insertion tubes x5, Standard insertion tubes x1 Micro Knife, and a pipe cleaner

The Dynaplug Pill (aka Micro Pro) is an ergonomic, compact repair tool that quickly fixes most punctures in tubeless bike tires. - Perfect for race situations, as the wheel stays on the bike - Repair plugs are compatible with UST and tubeless ready tires (both ATB and Road) - Less mess! (fix tire without dumping sealant) - Made in USA from machined solid billet AL6061 - 42g Kit includes: x1—Pill tool (dimensions: 2.25" x 0.875") x5—Brass soft nose tip repair plugs x2—Insertion tubes x1—Micro knife x1—Air stopper x1—Pipe cleaner

Please Note: The Brompton Tool Kit will NOT fit inside a Short Wheel Base (SWB) frame's front frame (pre-2004). The Brompton Toolkit fits right into your frame and has all the tools you need for basic repairs and maintenance of your Brompton bike. "A tool inside the bike? Wouldn't that rattle around?" you might ask. Not the Brompton Tool! The simple and ingenious design uses magnets and rubber dampers to silence even the smallest rattle. Do you ever wonder "How will I change a flat tire if I don't carry a wrench in my pocket?" Well worry no more! The Brompton Tool kit has a 15 mm socket wrench to make removing tires a breeze. It also has a slew of other useful tools... The Brompton Toolkit includes: 15 mm socket wrench for axle nuts Ratchet handle for hex tools (reversible) Phillips and flat head screw drivers 2, 2.5, 3, 4, 5, 6 mm Allen wrenches Two 8mm wrenches, one 10 mm wrench 2 tire levers 1 glueless patch and sandpaper piece Not only is the Brompton Toolkit practical, it's also a gorgeous design piece within itself. And what else would you expect from Brompton Bicycle? Their team of perfectionists and practical thinkers never fails to come up with clever solutions that don't compromise function for form.

Can you tell the difference between 15psi and 17psi? No you can't. We can't either, but Blakburn's digital gauge can. Today's wider, lower pressure tires are more pressure-critical than back when we just used to put as much pressure in as the pump could stand. It's not about fending off flats these days, it's about grip. And the difference between too much and not enough can be as little as a couple of pounds of pressure. The days of "giving it a squeeze" are over. - Swivel/Dual Head - Backlit Display - Accurate within 1% of pressure - Rated from 1-150 PSI - Key Chain Loop - 0.30lbs

The ideal trail-side repair kit. - Contains 6 patches, 1 metal buffer, 2 tire levers and 1 tube of rubber cement

Zipp Speed Weaponry Valve Extender Wrench Set - Two 4 mm and 5 mm combination wrenches - Replacement wrenches required to properly install Zipp integrated valve extenders - Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender

White Lightning's Easy Clean Tire Brush is the perfect solution for cleaning dirty tires. It removes tread grit, which improves traction, helps to prevent flats, and minimizes the mess when storing or transporting your bike. The adjustable Easy Clean Tire Brush fits every shape and size of tire. You can also use it wet or dry, whether you just need to knock some dirt off or really get in there and give 'er a good scrubbing.

Our 2437 open bore adapter is used to press 24x37 sealed bearings into bottom bracket cups, and direct fit frames like trek BB90. The adapter is machined with one step at 24mm ID, which fits into the center of the sealed bearing. - Installs: 24x37 bearing - Inner step outer diameter: 23. 8mm - Outer diameter: 36. 8mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" threaded rod - Compatible with BP0006, BP0007 - Machined, red anodized aluminum - Sold individually (2 drifts required for some installations)

Sealed bearing extractor for 29mm ID bearings. Extractor has 1/2" thru hole for use with our 1/2" threaded rod press handles. - This extractor is part of a system that requires additional pieces to function.

Our 6806 open bore adapter is used to press 42x30 sealed bearings. The adapter is machined with one step at 30mm ID, which fits into the center of the sealed bearing. Common bearing size for BB30 frames and bottom brackets. - Installs: 6806 bearing - Inner step outer diameter: 29. 9mm - Outer diameter: 41. 8mm - Thickness: 7mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" threaded rod - Compatible BP0006, BP0007 - Machined, red anodized aluminum - Sold individually (2 drifts required for some installations)

Another must-have tool for the busy bike shop. Wheels Mfg. machined aluminum Speed Spacers take up extra space on your bearing press so you don't need to spin the handles as far to tighten things up. They also work in axle configurations where you need to press in a bearing over an axle. - Machined Aluminum - Anodized Red - Sold individually Compatible with: - PRESS-4 - Economy Press - PRESS-1 - Large Sealed Bearing Press - PRESS-1-HNASSY - Handle & Rod Assembly

Designed to press in all current wheels mfg bottom brackets! our universal bottom bracket frame drift is designed to press all current wheels mfg bottom bracket cups in to your frame. The adapter is machined with multiple steps to fit common bottom bracket shell inside diameters listed in the compatibility tab below. Each step is laser etched with the diameter size. Drift can also can be used as a frame bottom bracket shell sizing guide! - Inner hole sized to fit 1/2" threaded rod. (Not for use with our Press-1 or Press-4 ) - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg BP0006, BP0007 - Machined aluminum - Anodized red - Sold individually We do not recommend it for use with press with a rod diameter less than 1/2". When used with a smaller rod, it is almost impossible to prevent the cups or bearings from pressing in straight.

Our GXP-LEFT open bore adapter is used to press 22x37 sealed bearings into SRAM GXP bottom bracket cups and direct fit frames like trek BB90. The adapter is machined with one step at 22mm OD, which fits into the center of the sealed bearing. - Installs: 22x37 (GXP) bearing - Inner step outer diameter: 21. 9mm - Outer diameter: 36. 8mm - Thickness: 7mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" ACME threaded rod - Compatible with BP0006, BP0007 - Machined, red anodized aluminum - Sold individually

Replacement rod for Wheels Mfg. large sealed bearing press (PRESS-1 ) and economy bearing press (PRESS-4 ). Primarily designed for pressing bearings into hubs. - 3/8" x 12TPI threaded rod - 8.75-inch length - One end is drilled and tapped for M5x12mm flat head screw to secure fixed-end handle to rod - Does not include screw (can re-use existing screw)   - This is NOT a replacement for Wheels Mfg. universal bottom bracket press (PRESS-7 )

Wheels Manufacturing Sealed Bearing Extractor for GXP (22mm) bearings Fits: SRAM GPX bottom bracket bearings and other bearings with an inside diameter of 22mm

Precision-machined anodized aluminum tool designed to allow for easy installation, removal, or adjustments of the Shimano Hollowtech II Crankset compression bolt.

The Wheels Manufacturing universal bottom bracket drift presses all current Wheels Mfg bottom bracket cups into your frame or bearing cups. The adapter is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed below. Each step is laser etched with the diameter size. - Inner hole sized to fit 1/2" threaded rod. Not for use with Wheels Mfg PRESS-1 or PRESS-4 - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg Universal BB Press - Machined aluminum - Anodized Red - Sold individually - Drift can also be used as a frame bottom bracket shell sizing guide! Fits the following bottom bracket shell sizes: - BB30 (42mm) - PF30 (46mm) - BB86, BB92 (41mm) - BBRight (46mm) - BB386EVO (46mm) - Cannondale BB30A (42mm) - Cannondale PF30A (46mm) - Specialized Carbon OSBB (46mm) - Specialized Alloy OSBB (42mm) - TREK BB90, BB95 (37mm) - PF24 (41mm)

This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually

- Bottom bracket and bearing installation kit - (1) 1/2" rod, (2) threaded handles - (1) 2237 OPEN BORE, (2) 2437 OPEN BORE, (2) 29mm OPEN BORE, (2) 6806 OPEN BORE, (1) FRAME DRIFT

- Essential bottom bracket bearing extractor set - (1) 6806 extractor, (1) 24x37 extractor, (1) 29 DUB extractor, (1) 22mm GXP extractor

- Advance bottom bracket bearing extractor set - (1) BE-22mm, (1) BE-24mm, (1) BE-29mm, (1) BE-30mm, (1) Bearing Pusher, (1) 39mm sleeve, (1) 42mm sleeve, (1) 44mm sleeve, (1) receiver cup

BB30 service kit for SRAM DUB cranks. - Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips - Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - Enduro ABEC-3 bearings - Use with SRAM DUB cranks Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.

Precision-machined anodized aluminum clamps designed to allow for easy and secure clamping of round suspension components during service. Designed by Barnett Bicycle Institute and manufactured by Wheels Manufacturing. Kit includes 3 pairs of shaft clamps to fit 15 shaft diameters from 8mm to 28.6mm For use with: - Suspension damper shafts - Suspension damper cylinders - Suspension air-spring cylinders - Suspension piston shafts - Thru-axles Clamp 10-006 fits - 8mm - 9mm - 10mm - 12.7 - 15mm - 15.9mm - 16.7mm Clamp 10-007 fits - 17.5mm - 18.7mm - 19.5mm - 21mm - 22.2mm Clamp 10-008 fits - 23.8mm - 25.4mm - 28.6mm

- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.

- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.

- Bearing extractor set for medium bearings - (1) 6002, (1) 6003, (1) 6804, (1)6805

- Essential bearing press for installation of bearings with a 10mm minimum ID - (1) 3/8 ACME threaded rod, (2) 30mm standoffs, (2) threaded handles

- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.

- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.

- Machined to match manufacturer specifications and designed to be used with a 1/2" drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.

The Bottom Bracket Gauge Tool was designed to provide all the necessary measurements to identify the proper bottom bracket for a specific bike configuration. A metric scale runs along the long edges for measuring bottom bracket shell width and crank spindle lengths. Durable red anodized aluminum with laser etching. Overall size is 7" x 3" x 0.125". The gauge can measure: - bottom bracket width - bottom bracket shell inner diameter - crank spindle length - crank spindle diameter - bearing inner diameter Specifications: Measures crank spindle diameters: 22mm, 24mm, 29mm, 30mm Measures bearing inner diameters: 22mm, 24mm, 29mm, 30mm Measures bottom bracket shell inner diameters: 37mm, 41mm, 42mm, 46mm Measures bottom bracket shell widths: 61mm, 68mm, 73mm, 79mm, 86.5mm, 90mm, 92mm, 95mm, 100mm, 120mm, and 132mm Measures crank spindle lengths up to 180mm

Complete tool kit for installing wheels manufacturing bottom brackets. Kit includes our new bottom bracket socket tool for installing our BB cups, along with new sealed bearing drifts for the following ID bearings: - 22mm - 24mm - 29mm - 30mm Bottom bracket press pro install kit includes: - UNC 48mm 16-notch socket x 1 - 22x37 drift 1/2" x 1 - 6806 OB 1/2" x 2 - 24x37 OB 1/2" x2 - 1/2" frame drift x 1 1/2-13 x 9. 7" - threaded rod unc x 1 44-48. 5mm - double 16-notch 1/2" socket x 1 - threaded handle x 2

Use this double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Socket is machined for 1/2-inch drive, but a 3/8-inch to 1/2-inch adapter is included so you can use it with 3/8-inch drive torque wrenches. - Compatible with all Wheels Manufacturing bottom brackets that have 48.5mm or 44mm, 16-notch spline patterns - Also compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ, Campagnolo Ultra Torque, and FSA - Machined 6061 aluminum - Anodized red

Easy-to-use tool removes and installs replacement bushings in suspension and shock pivots. Includes retaining tool, top cap, and three sizes of bushing drifts. - Fits eyelet sizes - 10mm, 12mm, and 1/2" - Machined aluminum - Anodized Red

This Wheels Mfg. Double End Bottom Bracket wrench fits 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. - Machined aluminum - Anodized red. - Compatible with all current Wheels Mfg bottom brackets with notched cups

- Drift and over axle set for less common thru axle hube and frame bearings - For use with 3/8" press rod - See wheelsmfg.com for full list of contents

The dropout saver system is an alternative to replacing badly bent or damaged derailleur dropouts. Rather than replacing the damaged dropout completely, simply drill out the damaged threads, install a dropout saver, and realign the dropout. Kit includes: - (1) 15/32-inch reduced shank drill bit - (2) DS-1 wide dropout savers     - (3) DS-2 narrow dropout savers    

Precision-machined anodized aluminum designed to allow for easy adjustment of the Fox DHX2/FLOAT X2 shocks requiring a 3mm and 6mm hex wrench. This small, pocket-sized tool allows for easy trail-side adjustments.

- Headset drift for sealed bearing installation press - Drift is machined with steps to press in headset cups that use either 1-1/8" or 1-1/2" bearings, but may be used for other cups with odd-sized sealed bearings - Compatible with bearing presses using 1/2" diameter rod, such as Wheels Mfg Headset Cup Press (PRESS-8)

The Headset Press Pro Install Kit is a robust, and easy to use tool. The kit includes a machined aluminum handle, 1/2" threaded rod, two machined aluminum drifts and the adjustable press stop allowing for easy drift placement. One drift is machined with multiple steps to fit common head tube inner diameters listed in the compatibility tab below. The other drift has two sizes to press in cups with either 1-1/8" or 1-1/2" bearings. - machined aluminum handle and drifts - red anodized drifts and handles - zinc-plated 1/2" diameter threaded rod - long threaded rod works with long head tubes up to 250mm includes - 1 head tube drift includes - 1 headset cup drift - 1 adjustable press stop - 1 threaded handle includes on 1/2"-13x17" unc threaded rod

Headset drift for sealed bearing installation press. - Drift is machined with multiple steps to fit common head tube inner diameters - Compatible with bearing presses using 1/2" diameter rod, such as the Wheels Mfg. Headset Cup Press (PRESS-8) - Fits the following headtube inner diameters: 34mm, 44mm, 49mm, and 56mm

- Bearing extractor set for small bearings - (1) 608, (1) 609, (1) 6000, (1) 6001

Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step

Wheels Manufacturing Over Axle Adapters are used for pressing your most commonly used bearing sizes into place. Each represents an excellent addition to the Press-4 Bearing Press. - Adapters sold individually

- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.

- Allows for quick and accurate positioning at the press of a button - Slides along 1/2" UNC threaded press rod when the button is depressed and can be placed quickly to secure drifts, spacers, and cups when completing maintenance or installation of bike headsets, bottom brackets, and bearings

- Similar to its big brother but at a fraction of the size. The new and more efficient Adjustable Press Stop Mini will make life easier for mechanics as it allows for quick and accurate positioning in places where space is tight at the press of a button. - Adjustable Press Stop slides along 3/8" ACME threaded press rod when the button is depressed and can be placed quickly to secure drifts, spacers, and cups when completing maintenance or installation of bike headsets, bottom brackets, and bearings. - Compatible with new and existing Wheels MFG press kits which utilize a 3/8" ACME threaded rod - Compatible kits include: Press-4, ST0006, Press-1 - Machined aluminum body - Anodized in Wheels MFG red. - Durable steel button - For use with 3/8" ACME threaded press rod (Sold Separately)

Wheels Manufacturing Sealed Bearing Extractor - 10mm Fits the following bearings: - 6000 - 6200 - 6800 - 6900

Wheels Manufacturing Sealed Bearing Extractor - 15mm Fits the following bearings: - 6002 - 6702 - 6802 - 6902 - 15267 - 15268

Wheels Manufacturing Sealed Bearing Extractor - 17mm Fits the following bearings: - 6003 - 6803 - 6903 - 17287

Wheels Manufacturing Sealed Bearing Extractor - 10mm Fits the following bearings: - 6704 - 6804 - 6904

Wheels Manufacturing Sealed Bearing Extractor for 24 x 37mm bearings Fits: - 2437 (Shimano Hollowtech II-compatible outboard bottom bracket bearings) - Other bearings with an inside diameter of 24mm

Wheels Manufacturing Sealed Bearing Extractor - 30mm Fits: - 6806 - Other bearings with an inside diameter of 30mm

Wheels Manufacturing Sealed Bearing Extractor - 8mm Fits: - 608 - 688 - Other bearings with an inside diameter of 8mm

Wheels Manufacturing Sealed Bearing Extractor - 9mm Fits: - 609 - 9227 - Other bearings with an inside diameter of 9mm

- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body - Anodized in Wheels MFG red.

Shock Bushing Press Kit An evolution of our original bushing toolset which required the use of a hammer to pound out shock bushings. The new design uses our threaded handle press system to easily and efficiently remove shock bushing in 12mm and 1/2 inch sizes. - Fits 12mm and 1/2" bushings. - Machined aluminum - Anodized Red

Thin flange bottom bracket socket designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. This single-sided socket is used for installing and removing 48.5mm, 16-notch bottom bracket cups. The socket has a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto 1/2 inch unc press rod for secure and easy installation of thin flanged bottom brackets. Machined 6061 aluminum anodized red