Zipp Speed Weaponry Valve Extender Wrench Set - Two 4 mm and 5 mm combination wrenches - Replacement wrenches required to properly install Zipp integrated valve extenders - Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender
White Lightning's Easy Clean Tire Brush is the perfect solution for cleaning dirty tires. It removes tread grit, which improves traction, helps to prevent flats, and minimizes the mess when storing or transporting your bike. The adjustable Easy Clean Tire Brush fits every shape and size of tire. You can also use it wet or dry, whether you just need to knock some dirt off or really get in there and give 'er a good scrubbing.
- Anti-Loosening, Anti-Corrosion thread prep with PTFE - Two colors offer coating for different spoke lengths
$9.49 - $10.99
Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step
This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually
Wheels Manufacturing Over Axle Adapters are used for pressing your most commonly used bearing sizes into place. Each represents an excellent addition to the Press-4 Bearing Press. - Adapters sold individually
Another must-have tool for the busy bike shop. Wheels Mfg. machined aluminum Speed Spacers take up extra space on your bearing press so you don't need to spin the handles as far to tighten things up. They also work in axle configurations where you need to press in a bearing over an axle. - Machined Aluminum - Anodized Red - Sold individually Compatible with: - PRESS-4 - Economy Press - PRESS-1 - Large Sealed Bearing Press - PRESS-1-HNASSY - Handle & Rod Assembly
Wheels Manufacturing Sealed Bearing Extractor - 9.5mm Fits: - R6 (3/8-inch) bearings - Other bearings with an inside diameter of 9.5mm
Wheels Manufacturing Sealed Bearing Extractor - 9mm Fits: - 609 - 9227 - Other bearings with an inside diameter of 9mm
Sealed bearing extractor for 29mm ID bearings. Extractor has 1/2" thru hole for use with our 1/2" threaded rod press handles. - This extractor is part of a system that requires additional pieces to function.
Wheels Manufacturing Sealed Bearing Extractor - 8mm Fits: - 608 - 688 - Other bearings with an inside diameter of 8mm
Replacement rod for Wheels Mfg. large sealed bearing press (PRESS-1 ) and economy bearing press (PRESS-4 ). Primarily designed for pressing bearings into hubs. - 3/8" x 12TPI threaded rod - 8.75-inch length - One end is drilled and tapped for M5x12mm flat head screw to secure fixed-end handle to rod - Does not include screw (can re-use existing screw) - This is NOT a replacement for Wheels Mfg. universal bottom bracket press (PRESS-7 )
Wheels Manufacturing Sealed Bearing Extractor - 17mm Fits the following bearings: - 6003 - 6803 - 6903 - 17287
Wheels Manufacturing Sealed Bearing Extractor - 10mm Fits the following bearings: - 6704 - 6804 - 6904
Wheels Manufacturing Sealed Bearing Extractor - 30mm Fits: - 6806 - Other bearings with an inside diameter of 30mm
This Wheels Mfg. Double End Bottom Bracket wrench fits 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. - Machined aluminum - Anodized red. - Compatible with all current Wheels Mfg bottom brackets with notched cups
An indispensable tool for the serious amateur bike mechanic or smaller bike shop, the Wheels Manufacturing Bearing Press is designed for installation of bottom brackets or sealed bearings with a minimum I.D. of 10mm. - Package includes 2 handles and a 3/8"-12 threaded rod - Economy Bearing Press, used with separately-purchased bearing adaptors
Use this double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Socket is machined for 1/2-inch drive, but a 3/8-inch to 1/2-inch adapter is included so you can use it with 3/8-inch drive torque wrenches. - Compatible with all Wheels Manufacturing bottom brackets that have 48.5mm or 44mm, 16-notch spline patterns - Also compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ, Campagnolo Ultra Torque, and FSA - Machined 6061 aluminum - Anodized red
- Headset drift for sealed bearing installation press - Drift is machined with steps to press in headset cups that use either 1-1/8" or 1-1/2" bearings, but may be used for other cups with odd-sized sealed bearings - Compatible with bearing presses using 1/2" diameter rod, such as Wheels Mfg Headset Cup Press (PRESS-8)
Headset drift for sealed bearing installation press. - Drift is machined with multiple steps to fit common head tube inner diameters - Compatible with bearing presses using 1/2" diameter rod, such as the Wheels Mfg. Headset Cup Press (PRESS-8) - Fits the following headtube inner diameters: 34mm, 44mm, 49mm, and 56mm
The dropout saver system is an alternative to replacing badly bent or damaged derailleur dropouts. Rather than replacing the damaged dropout completely, simply drill out the damaged threads, install a dropout saver, and realign the dropout. Kit includes: - (1) 15/32-inch reduced shank drill bit - (2) DS-1 wide dropout savers - (3) DS-2 narrow dropout savers
Replacement handle assembly for Wheels Mfg. large sealed bearing press (PRESS-1). Primarily designed for pressing bearings into hubs. Note: rod diameter is smaller than the hole size in Wheels Mfg. universal bottom bracket drift. Includes: - Machined fixed end aluminum "T" handle with brass insert - Machined non-fixed end aluminum "T" handle with brass insert - 3/8" x 12TPI threaded rod - M5x12mm flat head screw to secure fixed-end handle to rod
This 7-piece adapter set is used to install 22mm and larger inside diameter sealed bearings into bottom brackets. Includes adapters for the most common bottom bracket bearings for Shimano outboard cup BBs (HollowTech II), SRAM GXP, Truvativ, FSA, PF30 and BB30 bottom bracket bearings. - Includes open bore drifts for 6805, 24x37, BB30, PressFit30, GXP and BB86 bearings - 10mm ID hole, for use with Wheels Manufacturing bearing press handles - Compatible with Wheels Mfg. PRESS-1 or PRESS-4 handles
- Works in conjunction with Wheels Mfg sealed bearing press (BTI #WZ-9991) to install 10mm ID and larger bearings into hubs with shouldered axles, always pressing simultaneously on both the inner and outer race of the bearing and preventing damage during the installation process - Includes adapters for 12 different bearing sizes ranging from 10mm to 20mm: 6900,6000 (10mm ID); 6901,6001 (12mm ID); 6802,6902,6002 (15mm ID); 6803,6903,6003 (17mm ID); 6804,6904 (20mm ID) - Made in the USA
Another indispensable tool for the professional bike shop, the Wheels Manufacturing Press-2 works with bearings that have an I.D. of 10mm or smaller (most front hub sealed bearing fall in this range). It features an aluminum base with 9 open bore and over axle adapters, and a quick release skewer. - Installs sealed bearing sizes 6801, 6802, 6803, 6900, 6901, R6, 688, 608, 609 - All parts are laser etched for easy identification
- Fits Truvativ ISIS bottom brackets with 8-notch flanged cups (also fits crank spider nut on older X-Flow and Stylo crankarms) - CNC machined, heat treated steel construction - 1/2" ratchet drive and 32mm wrench flat tool interfaces
TorqSocket kit works with any mini-tool containing a 5 mm Allen wrench (or single 5 mm Allen key). Applies correct torque on component bolts for safety and to prevent damage to carbon parts. - Includes 3,4.5mm hex bits, T20 & 25 Torx - Packaged in own carrying case - Material: Hardened steel - Size: 2.1" x 2" x 0.9" - Weight: 75g
The Nano TorqBar is the slimmest preset torque wrench available, but don’t let its size deceive you. It is a precision-crafted, high quality tool for either the home mechanic, professional bike shop, or your own jersey pocket. Its advanced torque limit release design consistently applies precise torque values on component bolts for safety and prevents damage to expensive carbon parts. Includes preset TorqBit and the 5 most popular tool bits (3/4/5mm hex & T20/T25 Torx).
Don't throw your tools into a bin or a pannier where they'll get lost. The Survival Gear Box provides a compact, effective way to carry 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches; 8mm box wrench; 10mm open wrench; 14-, 15-gauge, Shimano and Mavic spoke wrenches; a universal chain tool; chain hook; flat and Phillips screwdrivers; 2 tire levers and adhesive patches. These are all conveniently secured via the internal tool holders and a safety strap.
The most compact adjustable torque socket available. Works with a 5mm Allen wrench or any mini-tool with a 5mm Allen key to provide correct tightening of frame and component bolts to recommended torque values for safety and performance. - Torque range: 2 – 6Nm - Functions: 7 - Tool Material: Hardened steel - TorqSocket Material: Steel / Aluminum - Rubber strap, Carry case - Size: 6.9 x 1.7cm / 2.7” x 0.7” (TorqSocket) - Weigh (TorqSocket) : 72g / 2.54oz - Weight: (TorqSocket+bits+case): 128g / 4.51oz Tools: - 3 / 4 / 5 Allen bits - T20 / T25 Torx bits
Page 1 of 8 Next page