Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Derailleurs

$27.99
R8 front derailleurs feature a cold forged aluminum body and are optimized for 7 and 8-speed chains and Shimano-compatible road shifters.
$899.99
More than a mechanical derailleur with a battery and a motor bolted on, the Eagle AXS derailleur is the heart of the whole AXS system. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. Instantaneous shifts from a single touch even while under World Cup-winning chain loads recorded in the heat of racing and affirmed in the test lab. Tested to IP69K water and dust proofing standard so whatever race day brings, you’re ready. - XC focus and trail ready - Carbon cage - Ti hardware - Rainbow colorway - Eagle technology - Overload Clutch protection - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - System is completely water and dust proof to IP69K - Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available. - Battery sold separately
$29.99
Altus wide link 7/8-speed compatible dual-pull multi-fit front derailleur for recreational off-road use. - Compact conventional swing design - Low-friction wide linkage reduces shifting effort and increases rigidity - Dual-pull design allows it to be used with top or bottom cable routing - Multi clamp band is compatible with all frame dimensions - 66-69 degree chainstay to seat tube angle range - For outer chainring size from 42 to 48 tooth, total capacity 20 teeth - Compatible with 7- or 8-speed drivetrains
$124.99 - $159.99
Shimano's Deore XT Rear Derailleur uses cold-forged construction and cutting edge technology to deliver crisp shifting, real-world reliability, and trademark precision. Plus-type derailleurs use a lever-actuated clutch spring to prevent chain slap, reduce noise while on the trail, and improve chain engagement when riding over rough terrain. Sealed pulley bearings keep things spinning smoothly, and wide plate construction prevents the derailleur from getting clogged with mud and debris.
$79.99
For unrivaled shifting, upgrade to SRAM's Rival Front Derailleur. Because consistency equals victory, Rival boasts lightweight and durable cold-forged-aluminum construction plus SRAM's Exact Actuation Technology for awesome shifting every time. The Rival shifts beautifully on standard and compact cranksets, too.
$79.99
Shimano's Deore Shadow Rear Derailleur is ready for mountain bike action. The Shadow design tucks the rear derailleur closer in to the wheel, reducing damage from rocks, roots, and trail obstacles. When it comes to gear changes, Shimano's Dyna-Sys supplies consistent, smooth shifting across the entire cassette.
$89.99
- SHADOW low profile design - Min cog size : 11T - Max cog size : 34T - Max front difference : 22T - Capacity : 45T
$104.99
SLX has always been Shimano's workhorse group: seriously solid performance, reasonable weight and all-mountain toughness. Well, this M675 version gets some trickle down features from XTR that are bound to make trail riders rejoice. This Shadow Plus derailleur retains the tucked-in Shadow profile that makes you less likely to tag it on trailside obstacles. And the Plus part is a one-way clutch that dramatically stiffens up the cage so chain slap, dropped chains, and all the associated noise are basically a thing of the past. It all adds onto SLX's legendary workhorse status.
$72.99
Shimano's Deore XT Front Derailleur sports a lightweight aluminum cage that's chrome plated to reduce wear. Plus, the body boasts wide parallel pivots that provide fast, smooth and reliable shifts every time.
$324.99
From top-tier XC racing to punishing endurance stages, Shimano defines the rear derailleur with their XTR Shadow Plus 11-speed model. The Shadow design is already well known and loved for its direct cable routing and low profile that greatly lessens the risk of snagging your cable on roots or tagging your derailleur on rocks. Shimano's Plus derailleur technology is a one-way clutch system that stabilizes the cage and your chain when ripping over rough terrain. Chain slap and noise is virtually eliminated and dropped chains are practically a thing of the past. And of course, it retains XTR's legendary smoothness, light action and super precise shifting. The long-cage design matches perfectly with XTR's new triple cranks and 11-speed cassette, offering Shimano's mega-wide gear range.
$69.99 - $125.99
Shimano's 105 Rear Derailleur delivers high-end function with upscale looks. With a body of light, durable cold-forged aluminum in Shimano's wide-pivot design with their light-action spring, rear shifting is practically effortless and always super smooth. The top pulley stays a uniform distance from each cassette cog ensuring that every shift resonates with the plunk of exact gear engagement.
$290.99
Eleven speeds to rule all the trails. That is the X1 Rear Derailleur's motto. It packs a massive amount of technology into its compact, lightweight aluminum body. This 11-speed gear changer uses a “horizontal parallelogram” design that limits all movement to the horizontal axis, reducing the force it takes to shift. The Type 2 clutch is brilliant. This self-lubricating, one-way roller clutch controls your chain tension to eliminate chain slap and give you smooth, consistent shifts over any terrain. For quicker, smoother, more exact shifting, the large upper pulley's offset design maintains a consistent chain gap across all gears.
$189.99
11 Speed Materials: 6061-T6 Aluminum, Glass fiber/Nylon Composite Shifter Compatibility: Box One or Box Two 11 Speed Pulleys: Closed Bushings Minimum Cog: 10 teeth Maximum Cog: 50 teeth Hardware: Aluminum / Cr-Mo Alloy Color/Finish: Matte Onyx Compatibility: Box Components / Shimano Weight: 290 grams Technology: Adjustable Tri-Pack Limited Slip Clutch, 3D Forged Linkages, Pivot Tech
$349.99
The new TR12 rear derailleur is able to provide a quiet and accurate ride over the roughest trails. The key feature to this pursuit is the Hall Lock. During the Race season, lead mechanic for Intense Factory Racing, John Hall, noticed excessive movement around the B-knuckle when riding over rough rock gardens and in tracked out corners. This was leading to more chain skipping and slapping creating possible variances in shifting. This inspired John's idea to lock the B-knuckle to the bike's derailleur hanger. TRP engineers worked closely with Hall to create this feature, The Hall Lock. - Hall Lock - G-Spec Ratchet Clutch - G-Spec finishing touches - Carbon fiber cage & upper link - Extra-wide parallelogram pivot - Sealed cartridge bearing pulleys
$84.99
- 1x12-speed SHIMANO SHADOW RD+ rear derailleur - MTB: Direct attachment (Shadow+) - 10T Min top Sprocket - 51T Max Low Sprocket - Fast and precise shifting for modern mountain biking - Silent drivetrain in all gear positions - Decreased rear derailleur and chain tension in low gear - Bigger 13T pulley - Stable drivetrain in rough terrain - Low-profile design avoids damage from rocks - Chain stabilizer reduces chain drop, slap and noise
$527.99
If your ride doesn't feel complete until you get a little dirt on your tires, you know the importance of capable components that can tackle anything. The Force XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal aplomb. Wireless and proven eTap shift logic, AXS connectivity, and advanced chain management mean this derailleur does exactly what you want when you need it. NOTE: Does not include eTap battery or charger. Compatible with existing eTap batteries. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - 1x specific for use with 10-44T XPLR and 10-36T cassettes - SRAM AXS enabled, allowing easy personalization - Chain management keeps the drivetrain quiet and secure - Large X-SYNC pulleys for increased durability and efficiency - Cage Material (RD): Aluminum - Pulley Bearings Material: Steel - Max Tooth: 44 NOTE: Does not include eTap battery. Compatible with existing eTap batteries.
$32.99
Optimized for Shimano compatible 9-speed road drivetrains, R9 front derailleurs feature metal construction and rapid shifting response. - Cold-forged aluminum body
$27.99
R-series rear derailleurs are designed to work with 8 and 9-speed Shimano-compatible road shifters. These R8 rear derailleurs have composite and steel parts that weigh more but have the same durability and performance as R9 and R10 derailleurs. - Steel pulley cage for extra durability - Not compatible with Shimano Tiagra 4700 road system - Short cage for double crankset and 28T max cog - Long cage for triple crankset and 28T max cog
$905.95
The Campagnolo Super Record EPS 12 speed front derailleur allows for maximum front shifting performance through its inner semi-cage design which helps the chain engage with the chainring. - Designed with a narrower cage for correct coupling with the 12 speed chain - Dedicated positions for each chainring help to avoid any contact between chain and cage, reducing the possibility of dropping the chain. - Derailleur body is crafted from monolithic carbon powder technopolymer for a lightweight and stiff unit Specifications: - Double or Triple: Double - Derailleur Capacity: 16 - Front Der/Shifter Compatibility: Campy Record/Super Record EPS - Front Derailleur Style: Traditional - Front Derailleur Clamp: Braze-on - Drivetrain Speeds: 12 - Weight: 132g
$59.99 - $63.99
The Shimano Deore M618 series front derailleurs provide reliable, accurate 2x10 speed shifting. They are available in a variety of mounting formats to suit most mountain bike frames.
$36.00
SRAM's X3 Rear Derailleur is ready for adventure. Its composite and steel construction is tough, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts. This derailleur is compatible with 7- or 8-speed drivetrains.
$379.45
The Campagnolo EKAR Rear Derailleur is designed for the 1x13-speed EKARndrivetrain with a gravel-orientated performance & build. - 2D parallelogram trajectory offers precise mechanical movement for 13 sprockets - High grade polymer pulley wheels (12T upper, 14T lower) allow for smooth chain running and secure retention - Carbon fiber-reinforced polyamide and anodized 7075 and 6082 alloys are lightweight, strong, and durable - Stainless steel bolts for strength and long-term resilience on gravel - Includes clutch lock for easy wheel removal Specifications: - Largest Cog: 44 - Rear Derailleur Mount Type: 10x1 Standard - Chain Wrap Capacity (teeth): 34 - Cage Length: Medium - Rear Der/Shifter Compatibility: Campy EKAR - Drivetrain Speeds: 13 - Weight: 275g
$72.99
- 10/11 Speed compatible - MTB: Direct attachment (Shadow+) - 11T Min top Sprocket - 46T(1x10), 42T(2x11/2x10) : Max Low Sprocket
$1,070.00
If your ride doesn't feel complete until you get a little dirt on your tires, you know the importance of capable components that can tackle anything. The RED XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal aplomb. Wireless and proven eTap shift logic, AXS connectivity and advanced chain management mean this derailleur does exactly what you want when you need it. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - 1x specific for use with 10-44T XPLR and 10-36T cassettes - SRAM AXS enabled, allowing easy personalization - Chain management keeps the drivetrain quiet and secure - Large X-SYNC pulleys for increased durability and efficiency - Compatible with existing eTap batteries - Cage Material (RD): Aluminum - Pulley Bearings Material: Ceramic - Max Tooth: 44 NOTE: Does not include eTap battery. Compatible with existing eTap batteries.
$149.99
The SLX M7100 series of derailleurs deliver advanced shifting performance with decreased tension in the low gear position and an added bumper on the pulley cage. Larger 13T pulleys increase efficiency and chain management while compatibility with Shimano's new 12-speed cassettes boosts range. - Advanced shifting performance provides the confidence to enjoy any trail - Fast and shockless shifting - Hyperglide+ - Extra wide range 12-speed drivetrain -10-51T (12-speed) - Silent drivetrain in all gear positions - Decreased rear derailleur and chain tension in low gear - New bumper added to rear derailleur pulley cage - Bump Stopper - Bigger 13T pulley - Stable drivetrain on rough terrain - Low-profile design - Shimano Shadow RD+
$199.99 - $205.50
Paul Components Melvin Chain Tensioner. Converts frames for single speed use. Long enough for a Dingle-setup, (2 rings, one cog) 20T max. - The Melvin uses two pulleys, just like a rear derailleur, which gives it 20 teeth of chain wrap - Will work with multiple front chain rings while maintaining proper chain tension - The pulleys are made of extruded and machined aluminum and have sealed bearings for durability - Pulleys are 2.25mm thick at the tooth which fits inside most narrow 6 through 9 speed chains, and the pulley cage is wide enough to allow 1/8? single speed chains as well - Long enough for a Dingle-setup, (2 rings, one cog) 20T max - Do not use with a coaster brake or fixed gear - Includes Paul's own Sealed Bearing Pulleys
$801.00
Whether on the starting line or not, the X0 Eagle T-Type 12-Speed rear derailleur brings competition-tested prowess to riders who let their riding prove everything. Engineered as integrated and interdependent transmission components, the X0 T-Type derailleur mounts around the wheel axle itself, contacting the cassette directly with a first-of-its-kind Hangerless Interface. This foundationally changes the entire relationship between cassette and derailleur. Beyond that, its Full Mount attachment method creates a far stronger connection that grips both sides of the frame. These X0 T-Type rear derailleur features the same intuitive pairing and set-up procedure as our Eagle AXS™ derailleurs - Competition proven strength and reliability - X0 Eagle derailleur is especially robust, allowing for common maintenance that serious riders demand - Features an overload clutch that boosts resiliency and a tucked-in profile that houses protection covers on the B-knuckle and outer link that are fully replaceable - Aluminum cage - Battery Not Included
$439.00
With SRAM's RED Rear Derailleur, SRAM set out to make their already race-proven design lighter, faster, and quieter. Through careful analysis of design, material selection, and component integration, they achieved all three. Refined shaping and a hollow titanium fixing bolt lighten the overall weight while maximizing performance. Carefully sculpted jockey wheels work together with the new chain pulley cage for lightning-fast, ultra-precise shifts. An updated elastomer coating applied to the jockey wheels makes for extra quiet operation. Plus, a redesigned shift cable routing makes set-up and adjustment easier than ever! Light, fast, and quiet, the RED derailleur delivers!
$31.99
- 2:1 actuation ratio compatible with most Shimano 3x7/8sp drivetrains - Aluminum and steel construction with 11-tooth pulleys barrel adjuster
$90.99
- 1x11-speed SHIMANO SHADOW RD+ rear derailleur - MTB: Direct attachment (Shadow+) - 11T Min top Sprocket - 51T Max Low Sprocket - Stable drivetrain on the trail - Low-profile design avoids damage from rocks - Chain stabilizer reduces chain drop, slap and noise - Silent drivetrain in all gear positions - Decreased rear derailleur and chain tension in low gear - Bigger 13T pulley