Other

The new generation spring series features a race-ready weight with big mountain strength. You'll also find advanced technologies that feature a multi-step surface treatment process, as well as cutting-edge heat treatments. Lastly, we use wire materials that allow us to stress the wire harder, without causing damage to the spring, and therefore design lighter springs. - Precise spring rates are broken down to 4 N/mm (23 lbs./in).

RockShox Sektor DebonAir Assemblies - Includes air top cap, Air spring and shaft bolt

RockShox Sektor DebonAir Assemblies - Includes air top cap, Air spring and shaft bolt

RockShox Motion Control IS Compression Dampers

Expand your choice of cranks for use in frames with 41mm ID shells. Replace your bottom bracket with these dual-row flanged bearings and run 30mm spindle cranks in your frame. These bearings fit directly in frames with 41mm ID bottom bracket shells. Crankset spindle length must be longer than 104mm when used in a 86.5mm wide BB shell. - Sold individually (two needed per frame) - Bearings: Enduro Dual-Row ABEC-3 - Color: Silver - Bottom Bracket/Frame Interface: BB86, BB92, PF90, BB104/107, PF121, PF132 - Bottom Bracket Shell Width: 86.5mm – 132mm - Bottom Bracket Shell I.D.: 41mm - Flange OD: 42mm - Crank Spindle Diameter: 30mm - Over Bearing Width: 92mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Weight: 36g

The Eclat Abyss Guard Sprocket. - Bolt drive sprocket

- EW-WU111 D-Fly wireless transmitter - Shifting customization, system diagnosis and firmware updates can now be done through Bluetooth Smart on smart phones and tablets, using the eTube app - Also allows to send shifting and system data to compatible cycle computers via private ANT+ protocol - Requires BT-DN110 internal battery or BM-DN100 external battery mount

Damper IFP Bodies for repair and maintenance of Rockshox rear shocks.

Air Can Assemblies for repair and maintenance of Rockshox rear shocks.

Air Can Assemblies for repair and maintenance of Rockshox rear shocks.

Air Can Assemblies for repair and maintenance of Rockshox rear shocks.

Air Can Assemblies for repair and maintenance of Rockshox rear shocks.

Air Can Assemblies for repair and maintenance of Rockshox rear shocks.

Air Can Assemblies for repair and maintenance of Rockshox rear shocks.

- Lever Assembly, Aluminum lever Gen 2, Black (assembled, no hose, and includes barb and olive), Guide RS

The OneLoc remote provides total control over your suspension at your fingertips. The increased leverage at the bar, translate in a smoother and easier actuation. - Can be mounted above or below handlebars - Great match for SRAM 1x drivetrains - Tall clamp allows OneLoc to easily fit non-SRAM components

The Eclat Abyss Guard Sprocket. - Bolt drive sprocket

The tool-free Maxle Ultimate Rear brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru axle system.

- 200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals, Charger 2 sealhead,DebonAir seals)—Lyrik B1/Pike 29+ (2018+)

Lyrik RC2 C1 200 Hour Service Kit

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

RockShox Reverb/Reverb Stealth IFP - Fits Reverb and Reverb Stealth

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

DT Swiss Sinc Ceramic cartridge bearings. - The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally

DT Swiss Sinc Ceramic cartridge bearings. - The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Campagnolo Pulley Assemblies

Damper IFP Bodies for repair and maintenance of Rockshox rear shocks.

Fit Kit SETQRF contains all the parts to mount the rack to the front of a road or mountain bike with a 9 x 100mm quick-release hub. This kit includes: - 9 x 100mm QR Skewer - A pair of pucks - Clear protective tape - all mounting hardware - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles.

Fit Kit SETQRR contains all the parts to mount the rack to the rear of a road or mountain bike with a 10 x 135mm quick release hub. This kit includes: - 10 x 135mm QR Skewer - A pair of pucks - Clear protective tape - all mounting hardware - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles.

RockShox Deluxe ThruActiv Rear Shock Damper Shafts for service and repair.

Fits: - 2011 - 2012 Cove Shocker DH - 2011 - 2012 Cove STD Features: - CNC machined from 6061 T6 Aluminum - Anodized black finish - Model: NSB DH0087

- Lever Assembly, Aluminum lever Gen 2, Black (assembled, no hose, and includes barb and olive), Guide R

OneLoc Remote Upgrade Kit - Upgrade from crown adjust to remote adjust - Includes OneLoc remote lever and compression damper

RockShox PopLoc Remote Upgrade Kits - Upgrade from crown adjust to remote adjust - Includes PopLoc remote lever and compression damper

OneLoc Remote Upgrade Kit - Upgrade from crown adjust to remote adjust - Includes OneLoc remote lever and compression damper

RockShox Motion Control For Remote Compression Dampers

Air Can Assemblies for repair and maintenance of Rockshox rear shocks.

Air Can Assemblies for repair and maintenance of Rockshox rear shocks.

Triggy Alpha - The name speaks for itself - the new pack leader of dropper remotes. Since the beginning our Triggy has proven to be a favourite among many many pro riders and testers but with Triggy Alpha we have now set the bar even higher and we confidently say: There is no better remote on the market. The video is pretty much explaining very well what makes Triggy Alpha stand out amongst others: - Ball bearing on the paddle - Angle-adjustable paddle - Black anodized aluminum body and paddle with laser engraved finish - 2 available paddle lengths for crisp or soft dropper engagement - 2 mounting holes - Integrated cable tensioner - Direct mount for almost any brake available (see mounting options) - New cable clamping for universal dropper compatibility - Extremely low weight: 32g/34g (short/long) - Maximum cable pull: 11 mm The short version mimics our proven original Triggy paddle geometry. The long variant features a 7mm longer paddle and reduces the required forces by about 15%. Triggy Alpha is compatible with any commonly available aftermarket cable-actuated dropper post on the market. 1 set Triggy Alpha includes: - 1x Triggy Alpha remote (short or long) - 1x shift cable - 1x wire endcap - 1x BikeYoke Splits Clamp or I-Spec Adapter (optional)

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

RockShox Fork Compression Dampers

BB30 service kit includes (2) Enduro 6806 ABEC-5 Angular Contact sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems

Replacement idler and idler kits for Deviate bikes with 52mm chainline. Fits: 2020+ Deviate Highlander 2022+ Deviate Claymore Specifications: Size: 18T 52mm chainline Narrow/wide tooth profile Machined from solid 7075 T6 Aluminum Anodized pewter with laser etched graphics Idler kit includes two Enduro 6803 LLB ABEC-3 bearings Model: NSB IP0011

OneLoc Remote Upgrade Kit - Upgrade from crown adjust to remote adjust - Includes OneLoc remote lever and compression damper

- Lyrik and Pike 29+ Solo Air 1 year service kit - Includes dust seals, foam rings, o-ring seals, Charger sealhead, SA sealhead

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals, Chgr2.1 damper sealhead, DB air spring sealhead) - Lyrik C2/Pike B3 Sel+ and Ult (2020)

The tool-free Maxle Ultimate Front brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru-axle system.

RockShox Fork Compression Dampers

RockShox Fork Compression Dampers

Alex Kennedy's signature sprocket pairs an 8mm thick sprocket with a 10mm thick replaceable nylon/fiberglass guard. - 6061-T6 alloy, full CNC sprocket and nylon/fiberglass replaceable guard - Runs directly on 24mm spindle - Supplied with adaptors for 19mm & 22mm spindles - Sinked adaptor for better chain alignment - Super durable, replaceable nylon/fiberglass guard allows for friction free grinding

Upgrade your standard SRAM rear derailleur with our 12T+16T set coupled with Garbaruk RD cage for SRAM derailleurs for improved shifting quality. - 7075-T651 Anodized Aluminum Alloy - 21g Compatible rear derailleurs (when equipped with Garbaruk cage): SRAM 11-speed: NX, GX, X1, X01, XX1, APEX 1, Rival 1, Force 1. SRAM 12-speed: XX1 Eagle, X01 Eagle, GX Eagle, NX Eagle, GX Eagle AXS, X01 Eagle AXS, XX1 Eagle AXS. Bolts for pulleys are not included

With Garbaruk RD cage for 11/12-speed SRAM rear derailleurs, you can squeeze much more performance out of your standard 11-speed rear derailleur. You can now use cassettes up to 50T, which provides 11-speed 1x drivetrain range close to that of 12-speed ones. All you need is to replace the cage of your standard SRAM rear derailleur with Garbaruk RD cage. By re-positioning the upper derailleur pulley closer to the small cassette cog and further away from the largest cog, we have been able to allow rear derailleurs designed to be used with 11-42T cassettes to be capable of running smoothly with 10-50T cassette. - 7075-T651 Anodized Aluminum Alloy - 42g IMPORTANT: The cage is to be used in 1x setup only with the listed compatible rear derailleurs Compatible rear derailleurs: SRAM 11-speed: NX, GX, X1, X01, XX1, APEX 1, Rival 1, Force 1. SRAM 12-speed: XX1 Eagle, X01 Eagle, GX Eagle, NX Eagle, GX Eagle AXS, X01 Eagle AXS, XX1 Eagle AXS.

Now you can use wide-range cassettes (up to 50T) with your GRX rear derailleur. Moving the upper derailleur pulley closer to the smallest cassette cog, and lower one further away from the largest cog allows your regular GRX derailleur to operate seamlessly with wide-range cassettes, like the Garbaruk 11-50T 11-speed model. - 7075-T651 Anodized Aluminum Alloy - 47g IMPORTANT: The cage is to be used in 1x setup only with the listed compatible rear derailleurs. Compatible rear derailleurs: Shimano 11-speed: RD-RX812 (GRX)

With Garbaruk RD cage for 11-speed Shimano rear derailleurs, you can squeeze much more performance out of your standard 11-speed rear mech thanks to the more efficiently positioned rear derailleur cage. You can now use cassettes up to 50T, which provides 11-speed 1x drivetrain range close to that of 12-speed ones.. By re-positioning the upper derailleur pulley closer to the small cassette cog and further away from the largest cog, we have been able to allow rear derailleurs designed to be used with 11-46T cassettes to be capable of running smoothly with 10-50T cassette. - 7075-T651 Anodized Aluminum Alloy - 48g IMPORTANT: The cage is to be used in 1x setup only with the listed compatible rear derailleurs Compatible rear derailleurs: Shimano 10-speed: Deore (M6000, 10-speed model) Shimano 11-speed: RD-M7000-11 (SLX), RD-M8000(XT), RD-M9000 (XTR) **NOTE: NOT compatible with Di2 (XT M8050, XTR M9050) rear derailleurs.**

Our new derailleur cage for Shimano 12-speed MTB derailleurs is everything you need from a derailleur cage. We've united extreme rigidity (cage is CNC-machined out of 7075-series aluminum alloy), feather-like weight (48 grams) and exciting color options. - 7075-T651 Anodized Aluminum Alloy - 48g IMPORTANT: The cage is to be used in 1x setup only with the listed compatible rear derailleurs. Compatible rear derailleurs: Shimano 12-speed: RD-M7100 (SLX), RD-M8100 (XT), RD-M9100 (XTR) SGS (long-cage version only).

Upgrade your standard 11-speed rear mech with our 11T+16T set coupled with Garbaruk RD cage for 11-speed Shimano derailleurs for improved shifting quality. - 7075-T651 Anodized Aluminum Alloy - 20g Compatible rear derailleurs (when equipped with Garbaruk Shimano 11 speed cage): SLX RD-M7000-11-GS, XTR RD-M9000, XT RD-M8000 Bolts for pulleys are not included