Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Pedals

$72.99
The DEFTRAP will revolutionize what you should expect from a nylon composite pedal with it's non-offset symmetrical platform to offer added stability behind the spindle, a true concave pedal profile so your feet sink into it, 10 total pins (8 replaceable cr-mo pins and 2 molded pins), our tried and true sealed bearings and DU bushing system, and top tier nylon and glass fiber composite material to create a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, ability to skim over rocks, and even coming in 10 colors-the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market!
$99.99
- Hollow steel axle that makes it light and durable, as well as TIME's exclusive ATAC system that offers very easy engagement. - The open design automatically clears debris each time you step in for reliable performance every time. Specs: - Pedal Material: Composite - Pedal Weight: 147g - Cleat Compatibility: ATAC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"
$120.00
With loads of traction, sure-footedness, and premium control, Specialized's Bennies Platform Pedals are ready for everything from freeride madness to trail riding. They're made of a rugged, yet lightweight concave aluminum body with 24 replaceable pins for maximum grip. Durable chromoly axles and sealed cartridge bearings mean they're built to last. - 430 grams (pair) - Width x Length: 100 x 105mm - Thickness: 17.30mm in the center/19mm at each end
$199.99
e*thirteen's Plus pedal features a lightweight aluminum pedal body and 22 traction pins. - Lightweight aluminum pedal body - 22 traction pins - 9/16"
$137.99
Size-specific enthusiast-level platform pedal provides optimal shoe/pedal interface. Details - Optimal surface area - Minimal profile 16mm thin - 10 adjustable 8mm pins per side for grip - 10mm pins available for purchase here - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (US) // 37-43 (EU) - Stamp large recommended for shoe sizes: 10-15 (US) // 43-49 (EU) - Serviceable, pedal refresh kit available Specs - Adjustable pins: 10 per side - Body Material: A380 Aluminum - Endcap: T15 - Footprint: 100mm x 100mm (Small), 114mm x 111mm (Large) - Inner Bearing Type: Igus Bearing - Max Rider Weight: No restriction - Outer Bearing Type: Double Cartridge Bearing - Shoe Size: US 5-10 // EU 37-43 (Small), US 10-15 // EU 43-49 (Large) - Spindle Material: Forged SCM 415 Chromoly Steel - Warranty: 5 years - Weight: 439g per pair (Small), 494g per pair (Large)
$226.00
- Aluminum body that is slightly more compact than the SPECIALE 12, yet it offers a stable platform and four adjustable pins for optimal grip. - The micro-adjustable tension clamping system allows riders to fine-tune the pedal function for their preferred riding style. - TIME's patented clamping system allows for easy entry and positive, predictable release, as well as a self-cleaning design to ensure reliable performance in all conditions. Specs: - Pedal Material: Aluminum - Pedal Weight: 196g - Cleat Compatibility: ATAC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"
$84.99 - $114.99
Shimano's M540s are race-ready clipless pedals that don't require a team budget. These rugged, light beauties feature dual-sided Shimano SPD bindings that are easy to enter and exit and deliver excellent power transfer and maneuverability. The bindings are adjustable for dialing in the perfect tension and these sweet pedals have an open mud-shedding design to prevent clogging. Plus, the M540s are built to last with chromoly axles and sealed-cartridge bearings. - 352 grams (pair)
$184.99
Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.
$137.99
Crank Brothers' most versatile pedal. The Candy excels at it all—cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. Specs: - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 355g per pair - Warranty: 5 years
$33.00
- Developed for the TIME XPRO & XPRESSO road bike pedal range. - They allow angular and lateral freedom in order to respect the natural movements of your legs and joints. - You can also adjust the Q-factor (by switching the cleats) - The Bi-material brings more durability when walking with the cleats. - These cleats are the stock cleats included with all XPRO & XPRESSO pedals.
$74.99
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
$38.00
Problem Solvers Deckster pedal adapters. Converts SPD-compatible pedals to platform pedals for casual cruising. - Works with 2-bolt, SPD-style cleats, such as Time, Shimano, Crank Brothers, Wellgo and others. Not compatible with Speedplay - Cleats not included - 85 x 95 x 10mm platform - Hardware included, cleats not included
$17.50 - $26.99
Everything you need to keep those Crank Bros pedals spinning freely is found in their Pedal Rebuild Kit. Each kit includes parts and instruction to rebuild one pair of Crank Bros. pedals.
$106.00
- Versatile and incredibly affordable. - The easy-to-clip-in ATAC system, large platform, and self-cleaning design make this the perfect choice for cyclists venturing off the road for the first time. - The ATAC EASY cleat makes for simple setup and clipping in and out even easier. - Pedal Material: Composite - Pedal Weight: 197g - Cleat Compatibility: ATAC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16''
$35.00
- Pedal Cover Cap Left/Right Top replacement TIME XPro
$120.00
- Large platform and an easy-entry system, make it perfect for everyday use. - Cleat engagement is easy and positive in every condition and for every skill level. - Hollow steel axle makes the pedal lightweight yet durable, while the open design keeps you riding with ease, clearing mud and debris every time you clip in. - Pedal Material: Composite - Pedal Weight: 192g - Cleat Compatibility: ATAC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16''
$34.99
Lightweight, low-profile full aluminum flat pedal - Barrel polished aluminum body with an ED black (Electrodeposition) or anodized silver aluminum cage - Built-in cage flip tab and mounting points for toe clips - Tough and durable ISO Mountain approved - Loose ball bearing axle assembly - Reflectors included (removable) - 9/16" CNC machined Cro-Mo axle - Dimensions: 97 x 63mm
$34.99
Chad Kerley's signature CK pedals feature a comfortable concaved body design, with 12 molded pins per side and micro knurling across the entire surface for added traction. The pedal bodies are injection molded from a tough nylon fiberglass blend, spinning on a durable full Chromoly spindle. Embossed end caps feature the CK signature logo, and feature a unique removal slot should the pedal need to be tightened or greased. - Spindle Size: 9/16" - Spindle Material: Heat Treated Chromoly Steel - Body Material: Nylon and Fiberglass Blend - Traction Pins: 12 per Side - Installation: 15mm Pedal Wrench / 6mm Allen Key - Weight: 1.2oz
$11.99
Lightweight one-piece Polypropylene thermoplastic pedals with in-molded grip nodes. - Proportionally smaller platform size is perfect for smaller-sized feet - Durable 7mm boron steel axle - Loose ball bearing axle assembly - Built-in reflectors included - 9/16" / 1/2" axle options - 300g per pair - Dimensions: 93 x 87mm
$23.99
Lightweight and strong one-piece aluminum flat pedal in a premium barrel polished aluminum finish. - Tough 7mm boron steel axle - Loose ball bearing axle assembly - Reflectors included (removable) - 9/16" axle - Dimensions: 101 x 79mm - Silver - 368g per pair
$11.99
Lightweight, strong 1-piece Polypropylene thermoplastic body - Tough 7mm boron steel axle - Engineered Polymer Bearing replaces traditional loose ball bearings for a simpler, lighter construction and smoother spinning pedal - Fineline reflectors included (removable) - 9/16" axle - Dimensions: 110.5 x 100.5mm - Black - 301g per pair
$196.99
Get ready to fly high with the Krypto DH pedals. Built tough with its CNC'd aluminum body and self-lubricating bushings, this pedal makes a big statement on the trail with full laser graphics and premium finish. Ten strategically placed pins keep you in maximum control. - Body: CNC-machined 6061 Aluminum - Axle: CNC-machined Cro-Mo - Bearings: Ultralight, self-lubricating sealed bushings - Replaceable pins - Size: 117mm x 110mm - Weight: 208g (each)
$29.99 - $49.99
The super popular Impulse Pedals feature 12 traction pins per side and a knurled, concave body for superior grip. Keep your bike looking fresh and swaggy! Product Specifications - Size: 9/16" - Body: Nylon Composite - Spindle: Chromoly Steel - Installation: 15mm Pedal Wrench or 6mm Allen Key - Pins: 12 molded traction pins per side - Weight: 14.2oz
$44.99
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
$50.00
All new external varus wedge fits between the cleat and the sole of your shoe for the perfect hip, knee and foot alignment. - External varus/valgus cleat wedge - Provides one-degree of varus/valgus correction - Shaped to fit SPD-SL, Look Keo and Speedplay - Package includes eight wedges
$150.00
Get ready to fly high with the Krypto DH pedals. Built tough with its CNC'ed aluminum body and self-lubricating bushings, this pedal makes a big statement on the trail with full laser graphics and premium finish. Ten strategically placed pins keep you in maximum control. - Body: CNC-machined 6061 Aluminum - Axle: CNC-machined Cro-Mo - Bearings: Ultralight self-lubricating sealed bushings - Replaceable pins - Size: 117mm x 110mm - Weight: 208 grams (each) - Dimensions: 11 x 20 x 7 cm
$24.99
- Forged alloy body with non-slip steel cage - Heat treated Boron 9/16" axle spindle - Sealed cartridge bearing system - Weight: 240g pair (9/16")
$144.99
- Super thin-profile platform pedal designed for freeride, BMX, and urban riders -Durable 6061 alloy construction with 20 replaceable traction pins (10 per side) - 13.3mm height/105mm width - CrMo spindle axle with a smooth running, sealed inner DU bushing/dual-outer sealed bearing system - Weight: 380g
$29.99
- Classic BMX-style platform pedal for all-around use across varied disciplines - Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives - 22.5mm height/105mm width - CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance - Design compatible with most foot-retention strap systems including Gates Straps (available separately) - Weight: 405g
$34.99
- The ATAC 13/17° cleat works with all TIME mountain pedals. - Included with all mountain pedal models numbered "6" and higher - Release angles of 13 degrees or 17 degrees depending on how the cleat is set up on the shoe - Compatible with all two-hole cycling shoes.
$62.99 - $82.99
- Wide and durable, 2-inch reinforced nylon seat-belt webbing upper strap with a smooth metal sizing buckle and 1-inch dual/lower run-through straps for retention control and comfort - Minimalist styling and extra-Long top strap will adjust to fit most uses, While stiffer lower straps help retain shape for easy in/out - Fits gates and other platform pedals with larger side-port openings (Sold as a set for 1 pair/bike's worth of pedals)
$12.99
Lightweight one-piece Polypropylene thermoplastic pedals with in-molded grip nodes. - Durable boron steel axle - Loose ball bearing axle assembly - Built-in reflectors included - 309g per pair - 9/16" / 1/2 axle options - Dimensions: 100 x 86mm
$154.99 - $159.99
Black Kat pedals are built around a larger double sealed bearing sytem, With a larger platform, thinner body and over all lighter appeal, these pedals bring great value. By utilizing a concave shape to the platform, rounded edges at the spindle, traction grooves throughout and included an additional pin kit with every purchase. - Extruded and CNC Machined 6061 T6 Aluminum - 100mm x 100mm platform - Concave body - Fully Serviceable DU Bushing and Double Micro Sealed Bearing System - Intended Use: Downhill, FR/DJ, Enduro, All Mountain - Allen bolt style pins - Additional Allen Pin kit included
$209.99
The Bladerunner is a perfect platform pedal for any application, this super minimized design at 11mm thin with a platform large enough for incredible stability. The Bladerunner thrives in the most technically challenging conditions possible. When ground clearance is a priorit you will be hard pressed to find a pedal more suitable for rocky terrain.
$219.99
Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here! After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform but also how concave it is. Furthermore, we reduced the diameter of the pins and added the most wear-resistant internals on the market. From the outside to the inside, we've sweated the details of the MK5 to bring you the ultimate flat pedal. - Weight: 379g - Platform material: 7075 Alloy - Profile: 15mm - Platform: 100mm x 102mm - Dish: 2mm (concave) - Pin material: Stainless steel - Pin width: 3.5mm - Pin height: 4.5mm - Axle Material: EN24T Steel - Internals: 2 x Igus W300 bushings, single sealed bearing and inboard rubber oil seal
$79.99
The Burgtec composite pedal is everything you'd expect from a Burgtec pedal but at a more affordable price point. Uncompromised grip, rugged durability, the exact same sculpted simple lines, fully backed up with spares and at an affordable price. The best of both worlds can exist. - Nylon and Fibreglass Body - SCM415 Cromo Axle - All replaceable steel pins - 16mm Profile, 1mm Dish - 96mm x 102mm Platform - Weight: 376g
$229.99
Designed and manufactured by PEMBREE in the UK with the strictest environmental standards, the PEMBREE the D2A pedal is totally carbon neutral. PEMBREE components are hand-crafted and fully made in England. All components, from the aluminium all the way to the bearings, are sustainably sourced and easily recyclable. PEMBREE D2A is designed as the ultimate racer's flat pedal. Balancing perfectly between traction, strength and weight. Riders of the D2A benefit from unrivaled grip via PEMBREE designed and manufactured Traction Pins, the strength of a stainless-steel spindle and premium bearings. - Spindle: Stainless Steel - Pedal Body: Aluminium - Traction Pins: Stainless Steel - End Cap: Aluminium - Inner Bearings: IGUS JSM - Outer Bearings: Sealed Ball Bearings - Pins: 10 Traction Pins per side - Body Dimensions: 100mm x 110mm x 15mm (centre) - Weight: 446g - Warranty: 5 years, 2 years bearings
$260.00
We believe the best components should perform while going unnoticed and designed the Daemon flat pedal with this in mind. The pedal features a gentle 2mm platform concave and a total concave of 7mm with our 5mm long, stainless steel pins. While not the largest pedal on the market, the 112mm long and 103mm wide platform with a gentle taper to the outline provides a large contact area while minimizing pedal strikes, and remaining comfortable and supportive. Precision CNC Machined in Whistler, BC. Specifications: - Actual dimensions: 112mm x 103mm - 2mm of true pedal body concave per side - 14.75mm thick at the axle, 16.75mm at the front and rear of the pedal. - 5mm long custom stainless steel pins with M4 thread (20 per pedal) create a total 7mm concave. - Double-sealed axle - VG style shaft seal with X-ring. - Two stainless steel, sealed Enduro cartridge bearings (outboard) and an igus bushing inboard. - Nitrox-coated axle - Weight: 438g (pair)
$28.00
Replacement pins for our Daemon pedals: - 5mm long - Made with 316 stainless steel - Precision CNC Machined in Whistler, B.C. - Sold in packs of 10
$59.99
The OneUp Composite Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, they won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedal sitting in the natural arch of your foot. The thin leading edge chamfered design gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. FEATURES - 10 rear loading Steel pins / side, with Nyloc nuts - DU plus cartridge bearing axle system - Thin leading edge chamfered design to deflect off obstacles - Wide platform design for increased stability - Contoured shape provides ultimate connected feel SPECS - Weight: 355g - Platform Size: 115x105mm - # of Pins: 10 per side - Axle Material: Black chromoly steel - Height: 18.5mm (13.3 at the leading edge) - Pin to Axle distance: 108mm - Color: Stealth Black, Red, Blue, Orange - Body Material: Nylon Composite
$83.00
- At under 200 grams per pedal, the XC 2 is very versatile and incredibly affordable. - The easy-to-clip-in ATAC system, large platform, and self-cleaning design make this the perfect choice for cyclists venturing off the road for the first time. - The ATAC EASY cleat makes for simple setup and clipping in and out even easier. Specs: - Pedal Material: Composite - Pedal Weight: 151g - Cleat Compatibility: ATAC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16''
$229.99
Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig. - Size: 110mm wide x 100mm long x 9mm high - Spindle diameter: 9/16-inch - Weight: 308 grams
$128.00
- Built for everyday use and features a stainless steel top plate and a hollow, steel axle. - A low stack height, an oversized pedal platform, and a carbon blade with three tension settings make this a very comfortable and efficient pedal. - The ICLIC system requires only a light step to clip-in, making it a very easy pedal to enter. Specs: - Pedal Material: Composite - Pedal Weight: 115g - Cleat Compatibility: ICLIC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"
$415.00
- Developed for the demands of professional Enduro racing, the SPECIALE 12 is made of a 6106-T6 aluminum - A wide platform, adjustable pins for optimal grip, and a micro-adjustable clamping system combine to exceed the demands of the most advanced riders. - TIME's renowned engagement system allows easy engagement with a positive, predictable entry and release, as well as a design that self-cleans even in the most difficult conditions.
$98.00
- All of the technologies from the rest of XPRESSO line at an affordable price. - The large platform, low stack height, and adjustable carbon blade tension make this a great pedal for all cyclists looking for pedaling comfort and efficiency without a high cost. - If you're new to clipless pedals or have ever struggled to clip into your pedals, you'll love the ICLIC system, which features a pre-opened design that makes clipping in extremely easy. Specs: - Pedal Material: Composite - Pedal Weight: 115g - Cleat Compatibility: ICLIC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"
$249.99
TMAC Signature Tyler McCaul Pedal. With over two years of development features one of the most concave designs on the market. Not only does the TMAC pedal give precise control, the non-offset design provides more contact with the pedal with equal weight distribution in front and back of the pedal spindle. This non-offset design feels like the largest pedal ever made at a mere 110mm x 105mm footprint.
$19.50
Spare Pedal Pins for the Composite MK4 Pedals. Keep maximum traction on your pedals with new Pedal Pins. - 32 Pedal Pins - Enough for a pair of pedals - Used for MK4 Composite Pedals only
$71.00
Our rebuild kit keeps your Daemon pedals running like new. Includes: - Nitrox-coated axles (left and right) with nuts (x2) - Stainless steel, sealed Enduro cartridge bearings (x4) - Igus bushings (x2)
$15.99
- Double tongue resin toe-clips - Nylon straps with steel buckles
$179.99
Size specific magnesium platform pedal provides optimal shoe/pedal interface. Details - Magnesium pedal body for weight reduction - Optimal surface area - Minimal body profile - 16mm thin - Concave pin profile & 10 adjustable pins per side for grip - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Serviceable, pedal refresh kit found here Specs - Adjustable pins: 10 per side - Body material: AM60B Magnesium Alloy - Endcap: T15 - Footprint: 114mm x 111mm - Inner bearing type: Igus Bearing - Max rider weight: No restriction - Outer bearing type: Double Cartridge Bearing - Shoe size: US 10-15 // EU 43-49 - Spindle material: Forged SCM 415 Chromoly Steel - Warranty: 5 years - Weight: 386g per pair
$31.99
The ATAC Easy cleats are specifically for the mountain bike pedal and City Bike range of TIME (LINK, MX and XC range). The release angle of 10-degrees is easy for riders who want a quick step out. - Weight: 44g/pair
$199.99
For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair
$136.00
- Oversized, hollow, steel axle, is lightweight yet rugged enough for any trail condition. - TIME's clamping system makes clipping in super easy. - Two release angle options (13° or 17°) along with a self-cleaning design that means you'll always be able to clip in – even in the muddiest of conditions. - Pedal Material: Composite - Pedal Weight: 190g - Cleat Compatibility: ATAC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16''
$199.99
The Surge pedals feature CNC'd construction, a low-profile design, sealed bearing/bushing construction and a full set of replaceable pins. - 6066-T6 alloy CNC body, chromoly axle - Replaceable pins - Extremely strong pedal body with recessed spindle cap - Extra pack replaceable pins & nylon impact ring - 9/16"
$309.95
Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm. Dual-Concave Profile: - Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side. Extra Grip: - Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts. Shaped with Purpose: - The shape of Waveform Aluminum Pedals matches the footprint of your shoe Reliable Performance: - Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Tapered Edges: - Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain Two sizes: - Large: 112mm x 106mm - 384g - Small: 105mm x 99mm - 373g Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.
$74.99
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 100mm x 100mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 299g per pair
$49.99
Classic/retro styled looks with distinctly modern construction and materials - Barrel polished aluminum body with Polypropylene thermoplastic cage and CNC machined Chromoly axle - Inlaid TPE non-slip rubber tread for unsurpassed grip - Premium LSL (Lightweight Self-Lubricating) oil-impregnated bushing and sealed cartridge bearing axle assembly - Built-in reflectors included - 260g per pair - 9/16" axle - Dimensions: 100 x 80mm
$33.99
- Allows a customer to replace their cleats. - Two replacement cleats in box
$42.99
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
$23.50
Spare Pedal Pins for the Penthouse Flat MK5 Pedals. Keep maximum traction on your pedals with new Pedal Pins. - 32 Stainless Steel Pedal Pins - Enough for a pair of pedals - Can be used for MK5 Penthouse flat pedals only
Page 1 of 2 Next page