Stems

On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored color is available on the Zipp Service Course stem. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering methods, we are proud to introduce our completely redesigned line of Service Course and Service Course SL stems. - Class-leading stiffness-to-weight ratio - More options for a better fit - New faceplate and geometry for greater stiffness and easier installation - Distinctive silver finish

3D-forged and CNC-machined from 6061 aluminum the Future Stem Comp is optimized for use with all Future Shocks. It's also compatible with our Specialized accessory mount for seamless integration. - 3D-forged and CNC-machined, 6061 aluminum, Future Shock-optimized stem. - Available in 6-degree angles and 60, 70, 80, 90, 100, 110, and 120mm lengths. - Compatible with the Specialized accessory mount.

Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components. - Bead-blasted, then anodized, finish - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation

Specialized's Comp Multi Stem is forged and machined from 6061 aluminum for stiff, responsive handling. The 6-degree rise puts your bars in a position for improved control and the 31.8mm handlebar clamp is compatible with composite and aluminum handlebars.

Constructed of 6061-T6 alloy, the Domain stem is fully CNC machined with offset rear machining for improved clamping and maximum underside machining to remove excess material for additional weight savings. With an overall simpler design, wider faceplate, and larger head 6mm hex bolts, if you're looking for a clean and refined stem that won't let you down, you've found it. - 6mm larger head hex bolts - Unique offset rear for improved clamping - Material saving and unique look - Wider faceplate for improved clamping - Bar Clamp Diameter (mm): 22.2 - Steerer Clamp Diameter: 1-1/8-inch - Weight (oz): 10.9

High rise design with STC (Shark Tooth Clamping) inside the stem to help grip the bars. Central bore for reduced weight, unique side pocket detail. - 6061-T6 alloy - Bar Clamp Diameter (mm): 22.2 - Steerer Clamp Diameter: 1-1/8-inch - Weight (oz): 10.61 - Stem Type: Front Load

Profile's Aris OS stem is a no-nonsense stem made from 6061-aluminum that's been shot peened and anodized for strength and durability. The 4-bolt faceplate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.

Zipp's Service Course SL Stem, crafted from 7075 aluminum, features a shape that's strong and lightweight, resulting in a best-in-class 1.85 grams per newton meter of stiffness. That results in no-flex sprints and accelerations. This stem is a favorite of Zipp ambassadors and pro athletes. - Distinctive Zipp cosmetics - Zipp Quickview integrated computer mount available separately - Lifetime warranty

eeSilk Stem is a fatigue-reducing compliance stem that noticeably reduces vibrations on variable surfaces. With up to 20mm of tunable compliance, an easy single bolt external elastomer change and a soft/firm compliance switch – the eeSilk Stem makes any road, no matter the terrain, smoother. - Weight: 225g - 235g - Angle: -6° (only) - Stack Height: 49mm - Stem Clamp: 31.8mm

Strong enough to endure a season in the Whistler Bike Park and light enough to pedal all day. The Overlord rules everywhere your bike can take you. We’ve updated the selection to suit modern bikes better and now offer a short 32mm length to accompany our 40mm and 50mm lengths. Specifications: - Clamp Size: 31.8mm handlebar - Fork Steerer Tube: 1 1/8? - Rise: 0-degree - Stack Height: 38mm - Hardware: 8.8 Grade Gold Zinc plated M6 bolts - Precision CNC Machined in Whistler, BC Weight: 32mm – 148g 40mm – 170g 50mm – 186g 60mm – 190g 70mm – 205g

After a delay, the king is back. We've updated the NSB Overlord stem to accommodate 35mm diameter handlebars. A wider clamp area and refined shape improve strength while retaining what we feel are the correct proportions. Still, light enough to pedal all day and strong enough to tackle full days in the Whistler Bike Park. The 35mm diameter stem is available in 35mm and 40mm lengths and will be available in all colors for the smaller Overlord. Specifications: - Clamp Size: 35mm handlebar - Fork Steerer Tube: 1 1/8? - Rise: 0-degree - Stack Height: 38mm - Hardware: 8.8 Grade Gold Zinc plated M6 bolts - Precision CNC Machined in Whistler, B.C. Weight: 35mm – 190g 40mm – 196g

The Atmos 7k stem is a lightweight performance stem designed for trail and cross-country use and is the lightest stem in the Atmos range. Featuring a rise or drop of 6° depending on your preference, all fasteners are adjustable via a T25 tool for easy, quick adjustments. The Atmos 7k also features an integrated GoPro mount. - ±6° angle - Integrated GoPro mount - T25 fasteners for 1 tool across the cockpit SPECIFICATIONS - Stem Angle/Rise: 6 degrees - Clamp diameter: 31.8mm - Steerer clamp diameter: 1-1/8 in - Hardware: Steel

Enduro has unquestionably evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wingsuit type accuracy. This Stem was born out of rider's demands for precision and for those moments when you have to be inch-perfect. Taking design elements from our World Cup-winning Direct Mount MK3 Stem and splicing these with our critically acclaimed Enduro MK2 Stem. We developed the Stem specifically with Pro's and Bro's alike. It was obvious we all live for the same challenge of pushing our own limits. As riders, we want a Stem that inspires confidence to change lines through the middle of a rock garden like it's no big deal or slap the inside of a turn and translate all your weight to front-wheel traction. Providing ear-to-ear grins and saying to your mates at the bottom of a trail, "Did you see that?". From the start of the design process, it became clear that we wanted extra rigidity. To yield this, we would need to make the Stem using a forging process - a new thing for us. The result of this allowed us to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance. Another area where we made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. We've vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as we could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition and like every Burgtec product, it's fully CNC machined and anodized in all your favourite flavours. Tested with the world's fastest jibbers and sendiest racers, this stem has everything you need to hit all those rowdy racing lines or pull that little bit harder off that big sender. - Forged and Fully CNC machined from AL6061 – T6 Aluminium - Stainless Steel Hardware - Available lengths - 35mm, 42.5mm and 50mm - Available in both 31.8mm (Black only) and 35mm Clamp - Weight: 35mm 138g, 42.5mm 152g, 50mm 160g

There’s something about 7/8" (aka 22.2mm) handlebars that seem to attract the most abusive riders out there, so we’ve taken our popular Boxcar stem and beefed it up even further! We already use 2024 alloy for all of our boxcar stems, as it has a higher fatigue and yield strength than 6061. We made sure the clamp was extra thick on this version and even added 2 more high-strength stainless faceplate screws. Is it overkill? Definitely. You’d have to run this thing over in a tank to damage it, but we’re pretty sure this will be the last 7/8" stem you’ll ever have to buy. - Machined in sunny Chico, California - 6 bolt faceplate (stainless T25 bolts) - 7/8" (22.2mm) bar clamp - Stack height: 36mm - 180g

- 3D forged and CNC machined from AL6061/T6 - 4-bolt cold-forged front clamp - 40 mm fork clamp stack height - Weight: 144 g (100 mm)

Top-load design stem with a 6061 aluminum cast body and cold-forged cap for added strength. Recessed sides and front make the Control Stem simple, sleek, and lightweight. The traditional 50mm reach and generous 32mm rise make for a comfortable ride. Product Specifications - Material: 6061 Aluminum - Reach: 50mm - Rise: 32mm - Stack Height: 30mm - Bolts: M8 x P1.25 6mm - Weight: 10.4oz

It’s low-slung, stiff, aggressive and serves up support and control the way a direct mount stem should. The Descendant direct mount stem may have been designed to attack the race clock, but it was built tough, to take on whatever comes next. No matter where you take it, this Descendant stem will keep you pointed where you want to go. - Pair with BoXXer fork - Gives DH riders lower more aggressive position - Super-stiff, stable front-end handling - Lightweight - Two-piece design

Lightweight and strong forged alloy stem. - Adjustable between 0 and +60 - Removable face plate for easy installation

FSA's Omega line is the perfect workhorse component group for the sport rider who wants race-winning technology and durability along with classic good looks. - 3D-forged and CNC-machined from AL6061/T6 - 4-bolt cold-forged face plate - Chromoly hardware - ±6° - 31.8mm handlebar clamp diameter - 35mm fork clamp stack height - 127 grams (100mm)

TruVativ's Hussefelt is an aggressive DH/freeride stem forged from 6061 aluminum for superb stiffness and superior strength. The short length provides supreme confidence when railing down the sketchiest steeps. Four bolts attach the faceplate for a vise-like grip on your bars, and the 2-bolt clamp secures to your steerer for pinpoint steering precision and stiffness.

Zipp's Service Course SL OS Stem, crafted from 7075 aluminum, features a shape that's strong and lightweight, resulting in a best-in-class 1.85 grams per newton meter of stiffness. That results in no-flex sprints and accelerations. This stem is a favorite of Zipp ambassadors and pro athletes. - Distinctive Zipp cosmetics - Wide range of sizes and angles. - Service Course SL OS stem made for 1-1/4" steerer tube bikes. Ships with shims for 1-1/8" steerer tubes - Zipp Quickview integrated computer mount available separately - Lifetime warranty

Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.

Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g

Dimension 26.0 Stems - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Fully forged AL-6061-T6 - 4-bolt handlebar clamp - Weight: 140g-180g

Built for all-mountain riding, the new Aeffect Rally 35 stem is a no nonsense workhorse. With increased strength and shorter length options available for modern bike geometry, Aeffect R performs well above its price point…and all of this at a competitive weight.

Zipp's SL Speed stem represents the essence of carbon componentry. It's stiff, secure and light weight with a sleek design that compliments any bike. It's a perfect addition to a mountain climber's favorite feather-light road bike, but it's tough enough to tackle gravel and cyclocross. Designed using SRAM Exogram technology, found in SRAM RED cranks, the new SL Speed Stem weighs just 123g (100mm) while exceeding our stiffness-to-weight standards. The SL Speed is available in six sizes ranging from 70 to 120mm to meet any rider's fit needs. Includes stiff aluminum faceplate and titanium hardware Torx T25 heads for precise torque readings and ease of adjustment. - Updated distinctive Zipp cosmetics - Designed using SRAM Exogram technology - New SL Speed Stem weighs just 123g (100mm) - ±6° carbon stem - Secure with four bolt faceplace using Torx T25 bolt heads - Matte Black finish - Lifetime warranty - Zipp Quickview integrated mount available separately

Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Perfect match with Descendant handlebars - 3D forged 7075 - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp

3D forged 6061-T6 Aluminum. - Excellent value and performance - A great way to try a few different stems - Suitable for Road or XC MTB - Sand-blasted black finish - + / - 7 degree - 1-1/8" steerer, 31.8 mm bar clamp

Making its debut on the all-new Roubaix the S-Works Future stem is the stiff lightweight upgrade that your Roubaix has been waiting for. It's compatible with all Future Shocks and our Specialized accessory mount and its sleek design will create a seamless integration. - Sleek & seamless integration with all Future Shocks. - Supremely stiff for responsive handling and feel. - Compatible with the Specialized accesory mount. - 6-degree rise - Length options: 70-140mm - Approximate weight: 145g (100mm)

Lightweight and durable forged alloy stem. - Removable faceplate for easy bar installation - 30 degree rise - Fits 25.4mm handlebars