Parts & Accessories
$20.99 - $22.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
$5.99 - $39.99
The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires
$6.00 - $6.25
Our Rim Strips provide the ultimate in protection between the rim and tube for all types of bicycle setups. - Nylon for maximum strength and effectiveness. - Conforms to rim profile.
SEAL Your Tire is a liquid sealant for tears and punctures up to 6mm. It is suitable for repairs or as preventative emergency protection for inner tubes and or tubeless systems. It should be renewed every six months. SEAL Your Tire's special feature is its CO2 compatibility.
These oversized Presta valve nuts are specifically designed to provide extra clearance and extra leverage to better tighten tubeless valves. They're especially helpful on single-wall rims. -Concave to allow better engagement of the valve/rim interface -Oversize to provide extra torque when tightening -Especially helpful on single-wall rim tubeless setups -CNC-machined AL-6061
- 16mm - High pressure dual ply PVC consruction - Tested to over 140 psi - Fits most 700c Rims - Pair
The ideal trail-side repair kit. - Contains 6 patches, 1 metal buffer, 2 tire levers and 1 tube of rubber cement
A comprehensive patch kit for all puncture sizes. - Contains 7 assorted patches, 1 metal buffer and 1 tube of rubber cement
45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud, featuring a concave carbide-aluminum design. The super-sized concave crown creates open space and inside edges of the bowl, resulting in twice the surface area for increased traction and grip. - Concave tip for durability and longevity - Aluminum base to save weight - Compatible with the 45NRTH stud insertion tool
- Shim adds support to Presta stem used in a Schrader rim
High-quality alloy valve extension, perfect for tubes with removable valve cores. Each extension has a rubber seal for an excellent seal. These are a great investment, as they can be used time and time again. - For removable valve core inner tubes - High quality and reusable - Air-tight seal to prevent leaking - Vittoria etched logo
- Ingenious snap-In plugs do the work of rim tape at 1/3 The weight - Makes tire installation easier and nipple repairs faster than with tape - Red plugs fit rims with 8mm holes - Yellow plugs fit rims with 8.5-9.3Mm holes
The Next Level in Sealing Power from the People who Invented Tubeless Conversions If you've walked the mechanics' pits at any National or International level event, chances are you've seen them: trademark Stan's black quart bottles with no labels. Look closer and you might have seen strange symbols scrawled all over the bottles in a silver marker, letters and numbers, formula notes by the man himself, Stan Koziatek. For nearly fifteen years Stan has been quietly formulating a special racing version of our legendary sealant for many of cycling's most successful teams. Working with athletes who push themselves and their tubeless systems to the absolute limit, he developed a proprietary sealant formula with close to twice the amount of the standard sealing crystals plus special "XL" crystals capable of sealing even larger punctures. Stan's Race Sealant's combination of large and smaller sealing crystals interlock to form a lattice work that not only seals but strengthens and reinforces the area of the puncture, allowing for an entirely new level of sealing performance. The quantity and size of crystals in this special formula means that Stan's Race Sealant can only be installed directly into the tire. As a result of its immense sealing capabilities, the Race Sealant will clog injectors and smaller bottles almost immediately. Stan's has made Race Sealant available to riders everywhere, and it is only available by the quart. - First choice of riders around the world for tubeless conversion and flat prevention - Twice the amount of Stan's standard sealing crystals - "XL" crystals capable of sealing even larger punctures - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment
$3.00 - $4.00
Specialized's 2Bliss Ready Rim Strips create a secure barrier, from sealant to rim, in a clean, simple to install strip. Mountain bike riders running 2Bliss can now change tires quicker and easier than with any other tubeless system. Diameter / Width - 26" — 23mm-559 PV - 26" — 25mm-559 PV - 650b — 31mm-584 PV - 650b — 39mm-584 PV - 29" — 23mm-622 PV - 29" — 25mm-622 PV - 29" — 31mm-622 PV
Our new 2Bliss Ready Tire Sealant was custom-designed in partnership with a leading laboratory for tire sealants, and it also underwent extensive real-world testing with our Factory Athletes. What we developed is an innovative, ecological formulation that's the answer to the requirements that riders like you've been demanding. It will immediately seal punctures up to 6mm, whether it be on a road or mountain tire, as well as across global temperatures [-20° to 70°C]. Natural, micro holes in the sidewalls will seal well, and the system is safe for use with latex inner tubes, even inside tubulars. Please note that this sealant is ammonium-, protein-, and latex-free, so it holds no potential for allergic reactions, and there's no risk of it creating damage to bike parts. - Proven by our Factory Team Athletes. - Seals punctures up to 6mm. - Performs in a wide temperature range (-20° – 70°C). - Works in latex inner tubes inside tubulars. - Ammonium-, protein-, and latex-free, so there's no risk of allergic reactions or damage to bike parts. Recommended sealant amount per tire: - Road: 24-32mm - 30-40ml - Open Road: 33-50mm - 50-70ml - MTN: 2.0-2.3” 80-100ml - MTN: 2.4-3.0” 100-125ml
Our new RapidAir Tire Sealant was custom-designed in tandem with our new RapidAir tires and Roval wheels to be the fastest tire setup out there. Through development, we learned that high-pressure, 24-30mm tires require a totally different formula to seal punctures. Our new exclusive mixture not only immediately seals punctures up to 3mm across a large range of temperatures, but unlike other sealants, RapidAir sealant will also keep its seal when you reinflate back to normal riding pressure. - Compatible with CO2. - Creates the strongest plug after sealing. - No damage to bike parts. - Performs in a wide temperature range (-20° - 70°C). - Recommended sealant amount per tire: Tire size 24-26mm - 40ml, 28-30mm - 50ml - - - For Maximum performance, use 60ml for any 24-30mm - Seals instantly with minimal pressure lost.
Optimized for carbon and aluminum rims, our top shelf tubular glue is a next generation formula. Derived from the most used and proven European recipe that has carried rubber on wheels for the Pro Peloton for decades. - Perfect for carbon and aluminum rims - Nitrile gloves in bottom of box to keep your paws clean - Red in color allows one to know where glue has been applied - Brush included on lid - Contains enough to mount 3 wheels
Special assembly liquid for bicycle tires. A practical sponge applicator allows the liquid to be applied to the tire bead very simply - without smudging fingers. When inflating, the tire bead slides easily into the correct position on the rim. The liquid evaporates completely after about 10 minutes!
PROCORE is an inner high-pressure air chamber for tubeless systems that allows dual air pressures for traction and impact protection. Procore allows low pressures (down to 14psi) to be run in tubeless tires, with a high-pressure inner chamber that locks the bead in place and prevents burping and rim dents from impacts. - Sold as a set with all components to set up a wheelset on one bike (tires not included) - Minimum internal rim width is 23mm - Maximum distance from rim well to rim inner surface is 20mm - Minimum tire pressure with ProCore is 14psi
Roval rim-specific tubeless valves are designed to match rim profiles and provide a better seal than previous generation valves. - Constructed of lightweight aluminum - Removable valve core - Mated with a seal which is specific to different rim models: - MY15 Control Carbon/Alloy = red rim shaped seal - MY14 Control SL = black rim bed shaped seal - MY15 Traverse SL/Alloy = black O-ring seal - MY18 Control SL = black O-ring seal and 50mm valve length
Roval's rim-specific Tubeless Valves are designed to match Specialized's rim profiles and provide a better seal than previous generation valves. - Constructed of lightweight aluminum - Removable valve core - Mated with a seal which is specific to different rim models: - MY14 Control SL = black rim bed shaped seal - MY15 Control Carbon/Aluminum = red rim shaped seal - MY15 Traverse SL/Aluminum = black O-ring seal
Your tires are the only thing connecting you to the road or trail, and having optimal tire pressure can have more impact on ride comfort than both frame and wheel choice combined. But finding the right tire pressure requires trial and error. TyreWiz is the first-of-its-kind tire pressure sensor for riders of gravel bikes and road bikes, taking the guesswork out of finding that optimal tire pressure. Lightweight and durable, TyreWiz adds only 10 grams to your tires. With an IPX7 waterproof and dustproof rating, you can confidently ride on any type of trail and know that your tire pressure sensor will keep going strong. TyreWiz reports data with +/-2% accuracy at a resolution of .1 PSI; vastly more accurate than any tire pump on the market. TyreWiz monitors the air pressure in real-time and relays the data to a cycling computer or a smartphone. That information is relayed to the SRAM AXS app and delivers personalized recommendations and pressure alerts. TyreWiz gives riders access to highly accurate, real-time tire pressure data to make decisions that can affect rolling resistance, traction, tire wear, and rider comfort. Features - Designed for road and gravel riders. - Personalized tire recommendations in the smartphone app for iOS and Android. - Data reported with +/- 2% accuracy at .1 PSI resolution. - Broadly compatible with tires that use a removable Presta-style valve core. - Inexpensive, user-replaceable CR1632 battery lasts for 300 hours. - IPX7 dustproof/waterproof rating. - Box includes valve-core removal tool for installation.
- CNC-machined tubeless valves with aluminum stem nut and valve core wrench cap - Fit for most other tubeless rims and wheel
Compact tubeless tire repair kit with machined aluminum storage tube that doubles as a handle. Combined tire reamer and insertion tool. Includes five tire plugs. - Weight: 47g
$19.99 - $56.99
A new standard in tubeless sealant. Finish Line Tubeless Tire Sealant, featuring Fiberlink technology, will not cure inside the tires and doesn’t need to be refreshed every few months to maintain effectiveness. This sealant will last the entire usable life of the tire. Since there is no liquid latex or ammonia in Finish Line sealant, it is naturally non-toxic, hypoallergenic and safe for carbon fiber rims. Additionally, Finish Line Tubeless Tire Sealant cleans up easily with water – no more scrubbing or scraping cured latex from tires and rims. Fiberlink technology makes this possible. Utilizing DuPont Kevlar fibers, Fiberlink seals are extremely robust once they plug a hole. When a puncture happens, fibers rush into the wound and quickly stop air loss. As the tire flexes while it is ridden, the Fiberlink mesh tightens and reinforces itself, creating a confidence-inspiring seal that will last ride-after-ride. - Non-latex ammonia-free formulation - Kevlar reinforced Fiberlink mesh seal - Seals up to 1/4" punctures - Can be used in extreme temperatures, down to -10 degrees Fahrenheit
- Specific DT-Swiss tubeless ready valve stems for tubeless applications
CushCore tubeless air valves are specially designed to work with a CushCore tire insert. The air passageway is T-shaped, rather than a simple through-hole, which prevents the insert from obstructing air flow through the valve. - Made from CNC machined from 6061 T-6 aluminum, anodized black - Tapered rubber collar permanently bonded at the sealing interface - The valve core can be removed to add tire sealant - Valve locknut with o-ring seal and valve cap are included - Sold as a set
CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert, allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 33 – 46mm and inner rim widths 19 – 26mm Includes - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions
CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 33mm to 46mm and inner rim widths 19mm to 26mm Includes - 1 CushCore Insert - 1 CushCore Tubeless Air Valve - Installation Instructions
CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.6 – 3.0" and rims with internal width 32 – 45mm Includes - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions
Page 1 of 2 Next page