Filter By:
- Parts & Accessories (118)
- Wheels (150)
- Hubs (37)
- Rims (22)
- Spokes (1)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Wheels

$2.50 - $2.99
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels.
- 14mm x 1mm (1411-AN) sold in pairs
- All others sold individually

$3.99 - $4.99
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.

$4.49
- Soft and elastic for an easy mounting
- Resistance to high pressure: 8 bar / 116 psi
- High resistance to punctures
- Sold by the unit

$4.49
- Soft and elastic for an easy mounting
- Resistance to high pressure: 8 bar / 116 psi
- High resistance to punctures
- Sold by the unit

$4.49
- Soft and elastic for an easy mounting
- Resistance to high pressure: 8 bar / 116 psi
- High resistance to punctures
- Sold by the unit

$4.99
Schwalbe High Pressure Rim Tape effectively protects the tube against mechanical damage.
- Elastic for ease of installation
- High pressure: 8 bar / 116 psi

$6.99
Need a Shift Cable Fixing Bolt Unit for your Alfine S7000/S700 hub? Here it is. Now, get that bike back on the road!

$8.99 - $17.99
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity

$10.00
Our 2Bliss Ready Rim Strips create a secure barrier from sealant to rim in a clean simple to install strip. Riders running 2Bliss can now change tires quicker and easier than with any other tubeless system.

$10.50
- High performance adhesive tape, a great pairing with Velox Cement
- Each roll is usually adequate for gluing two tubular tires
- Protects tube from spoke/nipple/rim puncture

$11.99
This lightweight, high-pressure rim tape offers great protection against spoke hole flats and is easy to install. This Italian-made tape is light and thin, so it will not inhibit tire fitting. Nylon elastic material is used to ensure a snug fit without movement.

$12.99
Replacement springs and pawls. Includes 6 pawls, 6 springs and 1 plastic retaining ring that holds the pawls in place even during disassembly to ensure you're never searching the floor for tiny springs.

$12.99
Surly Rim Strips have one job and they do it well. They cover the cutouts in your rim and — if you're running a tube — they protect it from spoke heads and other sharp matter (okay, so maybe they have TWO jobs but they do them both really well.) Rim strips are crucial and should be used with all Surly rims. Ours come in an array of colors so you can really "express yourself."
Surly Rim strips are available in two different materials: PVC and Nylon. PVC is great if you plan on only running tubes. However, if there's any part of you that wants to try this tubeless thing you've been hearing about, Nylon strips are just the ticket. They're thinner and offer minimal stretch so they stay put and lay nicely inside the rim to provide a secure seal. Plus, they're lighter which we all know means you'll go faster… maybe.

$19.99 - $21.99
- Self-adhesive, weaved polyester premium quality rim tape. About 3g per wheel instead of 30g for a regular rubber rim tape
- Sold by the roll, 1 roll will do about 20 wheels

$20.19 - $32.29
Developed for short spokes with a large deflection angle.
DT Pro Head nipples are designed for short spokes with a large angle of deflection, such as for e-bike use. Through the spherical contact surface, the nipple aligns automatically with the angle of the spoke, which leads to consistent power transmission. Note: brass nipples are not approved for children's products in the USA. See attached warning! All-brass nipples are recommended for e-bike use.
- Weight: starting at 59g for 64 nipples.

$20.99 - $29.99
SRAM's Rise 60 conversion caps are the ticket for converting your Rise 60 wheels to a different axle type.

$20.99
Don't let a cracked or worn dust cap sully an otherwise well-functioning Shimano Alfine internally geared hub. Get a spare and replace as necessary for continued performance and to preserve the longevity that you expect from Alfine.

$22.99 - $28.99
The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.

$22.99
- Pressure sensitive adhesive ensures the ultimate airtight seal
- Pink, semi-transparent tape for precise application & allows you to locate the valve hole easily
- Engineered stretch & elasticity fits perfectly in the contour of your rim and allows for easy application
- Extreme strength and durability
- Includes 4x Seal Patches

$22.99
WTP's Helix hub guards are designed to work on The Helixline of hubs, replacing the cones for a perfect fit without having to spread your dropouts.
- Includes heat-treated chromoly adaptor to replace hub cone nuts for a perfect fit
- Rear Hub guards are compatible with Helix V1 and Helix V2 freecoaster hubs and many other "KHE" style freecoasters on the market

$24.00 - $24.99
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant.
Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads:
- MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi
- ERD 615, 622x49.9, 29 in x 52.3mm
Your rim has a stepped valve and is not compatible with this Schrader valve.

$24.69 - $67.39
The buyer's choice for wheel builders looking to save weight.
The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use.
- Weight: starting at 20g for 64 nipples

$24.95
Boostinators are hub specific conversions designed to take non-boost hubs and convert them to boost compatibility. Don't toss out that wheelset - Boostinate it.

$24.99
The CF front hub guard presses directly over existing Cinema hub hardware to protect your hub and spokes on grinds. Injection molded from super durable nylon material, this guard can handle some serious abuse while still being affordable.
- Material: Nylon
- Fits: Cinema FX, VX2 and ZX Front Hubs and Wheels (2017 and later)
- Side: Either Side
- Weight: 0.9 oz

$24.99
Designed for the non-drive side, the CR rear hub guard presses directly over existing hub hardware to protect your hub and spokes. Injection molded from super durable nylon material, this guard can handle some serious abuse while still being affordable.
- Material: Nylon
- Fits: Cinema FX & FX2 Freecoaster; VX2, VX3, and ZX Cassette Hubs and Wheels (2017 and later)
- Side: Non-Drive Side
- Weight: 1.3 oz
Page 1 of 11
Next page