Parts

DBair IL is a twin-tube inline air shock with superior performance and reliability. The first shock to feature Cane Creek's LinEair Spring, the DBair IL is the best of both worlds, an air shock that feels more supple, linear and seamlessly supportive throughout its travel. - 4-Way independent adjustment - high and low speed compression, high and low speed rebound - Twin-tube damping for unparalleled small bump compliance - Climb switch lessens low-speed compression and rebound damping at the same time for improved climbing traction - Hand assembled and Individually dyno-tested

DBcoil IL is the lightest weight coil shock on the market, while using 40-50% more damper oil compared to other shocks in its class. Featuring a Twin-Tube damper design, the DBcoil IL is the first ever inline shock that packs in all of the function of a piggyback coil shock in a lighter and sleeker package.

The Campagnolo Chorus 12-Speed Crankset features lightweight carbon crank arms, and is optimized for Campagnolo's Ultra-Torque crank system. - Utilizes Campagnolo's Ultra-Torque crank system to provide a very lightweight and stiff system that transfers power to the pedals without power loss - Directly molded unidirectional carbon fiber cranks, steel axle, and aluminum chainrings provide exceptional stiffness and optimum power transmission - Symmetrical teeth on the internal chainring allow for fluid and precise transmission, even with extreme cross-chaining - Chainrings are surface-treated for longer life - Q-Factor: 145.5mm - Design is optimized to run multiple chainring combinations - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 96 - Pedal Spindle: 9/16" - Crank Intended Use: Road - Drivetrain Speeds: 12 - BB Included: No - Weight: 686

The Campagnolo Chorus Ergopower Brake/Shift system features improved ergonomics that can be tailored to the rider's individual preferences. - Ultra-Shift function allows for multiple shifts in one motion and greater control for racing - Aluminum braking lever features reach adjustment mechanism - Technopolymer Ergopower body Specifications: - Rotor Included: No - Pad Compound: Semi-Metallic - Brake Caliper Mount: Flat Mount - Brake Lever Use: Right - Hydraulic Fluid Type: Mineral Oil - Rear Der/Shifter Compatibility: Campy 12-Speed Chorus/Record/Super Record 2019+ - Drivetrain Speeds: 12 - Adjustable Reach: Yes

The Campagnolo EKAR Ergopower Shift/Brake Levers and Disc calipers were designed with gravel riding in mind. Easy, intuitive shifting mechanisms, and comfortable levers make this 1x13-speed system a desirable option for gravel riders. - Precise, quick shifting with One-Lever-One-Action and positive engagement with the efficient 1x13-speed Ekar drivetrain means a perfect change every time - Lever 3 has been redesigned so that it is easy to activate from the drops - Ultra-Shift mechanism allows you to up-shift 3 gears with one action - Vari-Cushion hoods provides comfortable, safe grip in any riding position and any off-road conditions - Additional laser-cut texture on lever blades and controls is sweat- and wear-resistant for an enhanced grip - Ergonomic adjustable reach to suit any hand or finger size Specifications: - Pad Compound: Organic - Brake Caliper Mount: Flat Mount - Hydraulic Fluid Type: Mineral Oil - Rear Der/Shifter Compatibility: Campy EKAR - Adjustable Reach: Yes - Drivetrain Speeds: 13

Record 12-Speed controls are aesthetically pleasing and functional. The unidirectional carbon design offers riders two different lever-handlebar positions to adapt different size hands, maximizing control. This results in consistent power, stiffness and reliability for when you need it. - Hydraulic disc brake actuation - Vari-Cushion technology offers an ergonomic, comfortable and safe support and grip - The “one lever-one action” feature assigns each lever one function to prevent shifting errors - Ultra-Shift mechanism enables upshifting up to three gears at a time, and downshifting a full five - Disc rotor sold separately Specifications: - Pad Compound: Semi-Metallic - Brake Caliper Mount: Flat Mount - Brake Lever Use: Right - Hydraulic Fluid Type: Mineral Oil - Rear Der/Shifter Compatibility: Campy 12-Speed Chorus/Record/Super Record 2019+ - Drivetrain Speeds: 12 - Adjustable Reach: Yes

The new Record 12x2 Speed crankset: a new hole-free design for the right-hand crank that optimizes aerodynamics. The new carbon fiber Record 12x2 Speed crankset with unidirectional finishing guarantees continuity with the finishing of the entire groupset, whilst maintaining the Ultra-Torque bracket system on the steel axle to ensure perfect transmission of power. The new Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters without affecting the Q factor that remains constant at 145.5 millimeters. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) enable reducing the weight through greater use of carbon fiber. There are eight fixing screws for increased structural stiffness. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.

- Super Record disc brake shifter/brake lever and caliper - Pre-assembled, with pre-bled hydraulic housing - Adjustable lever reach - AMS system allows adjustments of the modulation and lever travel - Vibration-canceling brake pads for quiet performance - Magnetic return spring - Ultra-Shift mechanism allows multi-shifts in both directions (4 up, 5 down) - Weight: 697g per pair (levers, hoses, calipers and fluid)

Well, what's to say about our new DIVINE SL? It is simply the lightest production dropper post in the world with a total length of 400mm and 80mm infinite drop. Tailored to the needs of XC and marathon racers, the DIVINE SL is the youngest offspring of our dropper family. Based on the award-winning and patented REVIVE technology, we've modified the internals to work perfectly with the shorter travel. Of course, you can mount and use your DIVINE SL also on bikes outside the XC department. However, the DIVINE SL was specifically designed in respect of XC riders' requirements. One of the features, is the "Tech-Climb" feature. While our DIVINE SL is completely locked in place in the top-out and bottom-out position for consistent riding position, the post can slightly spring in the middle positions. We've found out, that extremely steep and technical (e.g. rooty or rocky) uphill sections can be conquered with much more ease, when the saddle is just slightly dropped (lets say about 1-2cm). Having the saddle dropped just a bit (and not completely), the "Tech-Climb" feature" also adds some suspension to the post, filtering the impacts of roots and rocks. Back fully extended or fully dropped, the post is rigid again. Titanium saddle bolts, carbon and oval rail compatible forged clamping plates, tapered tubes. All of this comes stock on the DIVINE SL to achieve a sensational low weight of 395g (30.9/400mm). Another unique feature of our DIVINE SL: - You can easily cut it to a short as 283mm, if you can spare the extra length with your frame and saddle height. The cut weight can go to a minimum of 345g! - The shorter travel allows the DIVINE SL to come with a design, that doesn't require manual resets like the REVIVE. Of course, our DIVINE SL requires internal routing of the cable through your frame. 1 set DIVINE dropper post includes: - 1x DIVINE SL Seatpost - 1x cable housing 1500mm - 1x Inner wire 1700mm - 2x housing Endcap - 1x remote (optional) - 1x Bike Yoke I-spec adapter or Splits-clamp (optional)

Our award-winning REVIVE is also available as an oversized version for 34.9mm seattubes. Not only the lower tube diameter increased to 34.9, but also the stanchion tube grew form 25mm to 28mm. Finally there is a dropper that gives a stunning look in beefy seattubes while gaining strenght and stiffness at the same time. This is unrivaled by the competition. Optimized wall thickness and materials keep the weight extremely low and so our REVIVE MAX weighs in lower than some "regular" sized posts of the competition. Let´s see, what´s special about our REVIVE posts: What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers? Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike? BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off. Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth, … And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before. To understand the benefits over other posts you have to know about the problems of many current designs first: Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced. That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of. The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”. Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down. And here is where the patented RESET VALVE comes into play: - Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand. - This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike. So, now one might already understand that: - No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings. - No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design - The hydraulic system can be reset to “new” via the unique “REVIVE-valving” - This means the hydraulic circuit is a very stable closed system and basically maintenance free. Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability: - Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play. - Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes. 1 set REVIVE dropper post includes: - 1x REVIVE Seatpost - 1x cable housing 1500mm - 1x inner wire 1700mm - 2x housing endcap - 1x barrel cable clamp - 1x air valve adapter - 1x Quick-Reset-Lever - 1x remote (optional) - 1x BikeYoke I-spec adapter or Splits Clamp (optional) - 1 set titanium saddle bolts and nuts (optional)