Parts & Accessories
$29.99 - $31.99
Giro's Ambient Toe Covers add just the right amount of extra warmth on cool rides. Wind- and water-resistant neoprene covers are lined with AGrid fleece for warmth and protection from the elements. Reinforced toe guards add durability and reflective accents enhance visibility. - Small (36-39) | Medium (40-42) | Large (43-45) | X-Large (46-48)
Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.
Allows simple, removable, in-shoe adjustment to the forefoot varus/valgus angle for optimum foot, knee, and hip alignment. - Reversible shims work for right or left application - Vented for comfort - Package includes two varus shims (orange) or two valgus shims (yellow), based on selection
- Hyper Green and Black is paired with unique reflective trims to drastically increase your visibility to motorists 24-hours a day. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibilty to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.
IP1-Snap Boa® cartridge assembly for Expert Road and Women's Zante Road shoes. - Includes one cartridge dial assembly and lace. - Left- and Right-specific. - Not for resale, for warranty replacement
L6 Boa assembly for all Specialized L6-equipped shoes.
Your cycling shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works and Pro model road shoes. - Fits 2012 and earlier S-Works shoes - Fits all Pro Road shoes - Heel lug only - Sold in pairs; includes screws
Your road shoes weren't made for walking, but that's just what you did. We can't blame you, though, especially when installing a Replacement Road shoe Heel Lug is so darn easy. Just install these on your S-Works Road shoes (2012 and earlier), and feel the tread under your feet again. - Replacement tread for S-Works 6 and Sub6 - Heel Lugs Only - Sold in pairs; with screws
Replacement tread for S-Works 7 Road shoes. - Heel Lugs only. - Sold in pairs with screws.
Replacement Boa® Snap 3 dials for S-Works 7 Road shoes. - Includes one cartridge dial assemble and lace. - Left- and right-specific.
Improve traction in the worst conditions with aggressive toe studs. Ideal for CX racing or Mountain riding in snow, ice, mud or even just hard pack dirt. - 15mm length is longer than standard - Durable stainless steel is engineered for long-lasting wear - Precision threads are compatible with most off-road cycling shoes. - Original equipment for some S-Works XC. - Packaged as 5pc, so you have a spare.
Giro's Knit Shoe Covers add just a touch of extra warmth, protect your shoes from winter road grime, and light up the night with visibility-enhancing reflective ankle stripes. Cordura knit fabric is tough as nails and will stand up to enthusiastic use. Details: When it comes to your cycling shoes, a little protection can go a long way. The Knit Shoe Cover is a reliable, lightweight option that you're sure to appreciate when temps drop. In addition to protecting your cycling shoes from road grime, the Knit Shoe Cover adds a touch of warmth for transition weather and help keep you lit up at night with reflective ankle cuff thread.
Stay insulated and protected on the trail The water- and wind-resistant neoprene exterior of the Proof™ MTB Winter Shoe Covers are optimized with flex zones in key areas and engineered from a super-stretch neoprene that minimizes bulky feel without compromising warmth. The sole includes a molded rubber bottom to help improve traction and durability when worn over mountain bike shoes. Reflective detailing and locking zipper are the finishing details in this essential winter off-road shoe cover. Compatible with most mountain bike shoes. Sizing: · S 37 - 39 · M 39 - 42 · L 42 - 46 · XL 46 - 50 Details: · Water-resistant neoprene fabric · Super-stretch neoprene flex zones at ankle · YKK™ locking zipper · Reflective highlights · Durable walking pads · 20 to 45F / -6 to 7C
These replacement walking pads are easy to install, and bring your shoes back to original spec, so you can keep on movin'. These replacement walking and heel pads integrate with the Republic LX, Republic, Civila, Territory and Reveille shoes, and the kit comes with full left and right replacement pads and includes hardware.
The X-Static Supernatural Insoles Fit Kit delivers customizable arch support for a better feel. Two cycling-specific footbeds and three interchangeable sets of arch inserts, ranging from small to large sizes, fit together without the need for tools.
The waterproof, seamless Xnetic H2O Shoe Covers have enough warmth and durability for you to stay comfortable when the temperatures freeze but the need to ride burns. Waterproof, breathable protection without excess bulk or stiffness. The Xnetic H2O shoe cover brings waterproof performance, seamless construction, and breathable fibers together for the highest level of flexibility available. The unique three-layer composition fuses our RainGuard membrane between a durable nylon outer shell and hypoallergenic liner, for use in wet weather and temperatures that dip towards freezing.
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
The FS260-Pro Nemo Overshoes help keep your feet warm on even some of the coolest, dampest days. Superstretch neoprene is used to ensure a snug fit over your shoes. A stretchy, abrasion-resistant sole and hard-wearing aramid stitching make this an overshoe that can be used time and time again. - High-stretch fabrics provide zipperless access - Superstretch waterproof thermal neoprene upper - MTB and road cleat compatible sole - Stretch abrasion-resistant sole/heel - Hard-wearing stitching using aramid thread - Reflective trim
Offering multi-season protection from the elements, the FS260-Pro Slick Overshoe II comes in a compact and lightweight construction. - High stretch waterproof PU upper - Open sole design with durable toe panel and instep crank rub protection - Deep elastic cuff with silicone gripper - Offset rear zipper access with snap-down puller - Reflective print twin stripes on the rear
Super-compact toe covers - will fit easily into a jersey pocket / Stretch waterproof PU fabric / Reflective print on front / Elasticated cuff / Cleat compatible sole Key Benefits: - Super-compact toe covers - will fit easily into a jersey pocket - Stretch waterproof PU fabric - Reflective print on front - Elasticated cuff - Cleat compatible sole
Water Frozen In Your Bottles? No Problem. Keep Riding Year Round With The Ultimate Cold Weather Overshoe That Keeps Your Feet Dry And Cozy In Even The Worst Of Weather. The Freezing Point Overshoe II is the next generation ultimate cold-weather riding overshoe. Rigorously tested in the depths of Scottish winter to give you the confidence to get out on your bike without having to worry about losing all feeling in your toes. Comfort was a key consideration when updating the Freezing Point Overshoe II. To improve pedaling comfort, the decision was taken to off-set the rear zip, moving it away from the flex point behind your ankle reducing the chance of it digging in. Smooth neoprene outer face creates a surface that water naturally runs off, while a thick brushed internal face fabric provides warmth and comfort. A durable sole with cleat access points stitched with a bulletproof aramid thread that extends the lifespan of our product beyond more flimsy alternatives on the market. - Fleece-lined neoprene construction - High-cut design for extra protection - Raw-edge neoprene with an inner silicone strip around the ankle to prevent movement and help keep water out - Offset rear zip with snap-down puller and zip guard - Hard-wearing aramid sole and stitching using aramid thread - Crank-rub protection print - Reflective details
Key Benefits: - Tough nylon-faced neoprene upper - Offset rear zip with snap-down puller and zip guard - Moulded rubber toe cap with treaded underside to help climb steep, muddy slopes - Asymmetric front seam for improved fit - Hard wearing reinforced sole protects the bottom of the overshoe from rocks and pedals - Crank rub protection - Reflective detailing - Suitable for MTB cleats only - 90-day Satisfaction Guarantee Design Philosophy Endura was among the first to employ neoprene in bike overshoes. A core stalwart of our collection, the MT500 Overshoe has been a best-seller for many years. Here in Scotland, we know a thing or two about foul weather gear and this latest evolution of our waterproof durable mountain bike overshoe is the result of years of testing in the worst possible conditions. Endura’s unique molded rubber toe cap with a treaded underside provides grip when climbing steep and muddy slopes. Improved Durability The stand-out feature of Endura's MT500 Overshoe, and the one that sets it apart from the rest of the competition, is the molded rubber toe cap. This has been totally revamped with improved tread on the underside that gives you plenty of grip on steep, muddy slopes and also includes additional reinforced areas that improve the durability of the overshoe. Neoprene is the perfect material to construct overshoes from. Not only does it provide water and wind protection but it also adds an insulate layer over your foot. This keeps your circulation going allowing you to ride for longer in comfort, whatever the weather. 90-Day Satisfaction Guarantee So confident are we in this product that, if you are not entirely satisfied with it then we offer a no-quibble refund or replacement policy within 90 days of purchase.
Designed to be abused and then re-used, the MT500 Plus Overshoe II uses super tough nylon faced neoprene with durable overlays in high wear areas and a hard-wearing rubber sole that is compatible with wide fit flat pedal and clipless MTB shoes. The front toe section incorporates aggressive, lugged tread to ensure that you don’t lose any of that vital traction needed to push back up the trail. - Super tough, nylon faced neoprene upper with highly durable overlays - Exclusive, hardwearing rubber open sole for flat or clipless pedals - Aggressive rubber toe section for added grip - Rear double Velcro closure with fit adjustment - Wide fit, suitable for varied MTB flat pedal and clipless shoes - Clean shoes, clean lines, muddy trails - Due to the variety of shoe profiles check compatibility with your shoe by trying on before buying
Key Benefits: -High stretch, waterproof, multi fabric construction -Wipe clean PU front panels with soft superstretch neoprene ankle -Zipless, pull-on design for comfort and shoe hugging fit -Highly durable, indestructible sole fabric overlays -Raw edge cuff with silicone gripper -Reflective trim
Key Benefits: -Full length Velcro® closure at rear -Reflective logo and panels at rear -Elasticated stirrups -Durable 3 layer nylon sole -Suitable for a variety of footwear and cleats
Giro MTB Shoe Replacement Cleat Hardware
Page 1 of 1