Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

Yuba Hold On
$119.99
Yuba's Hold On gives your traveling companion a sure grip when you're riding about town. This stem/handlebar combo attaches to the seatpost of Yuba Mundo's cargo bikes so they'll feel like they're on a bicycle built for two even if they can't help out with the pedaling.
Wolf Tooth Components 16 Tooth Cog
$26.99
We did our homework on this cog and we think you will be pleased with the result! This 16t cog smooths out the cog to cog transition when using our GC and a standard 10 speed 11-36 cassette. You should expect this to shift well and last as long as the rest of your cassette cogs of similar size. Here are the transitions WITHOUT the 16t cog (4 tooth max jump): - Remove the 15t -> 11-13-17-19.... - Remove the 17t -> 11-13-15-19... Here are the transitions WITH the 16t cog (3 tooth max jump): - Remove 15t & 17t-> 11-13-16-19... Compatibility: Shimano 10 speed cassettes - XT 11-36t (CS-M771) - XTR 11-36t (CS-M980) - Other 11-36t Shimano cassettes like SLX HG81 11-36t - Modification required (must drill out rivets holding the 17t to the larger cogs) SRAM 10 speed cassettes - PG 1030, 1050, and 1070 - 11-36 and 12-36 - X0 11-36t(XG - 1080) - Remove the 14t rather than the 17t
Wolf Tooth Components 25mm B-Screw
$1.99
- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs
Wolf Tooth Components 5-Spoke GXP Direct Mount Ring
$124.99
Wolf Tooth's SDM® chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. - There are 3 offsets: Standard: 47mm chainline, 6mm offset for cyclocross and road cranks Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 Boost: 52mm chainline, 3mm offset BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset
Wolf Tooth Components 64/104 Chainring
$109.99 - $117.99
- Standard 4-bolt ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy - 36g (30t)
Wolf Tooth Components Direct Mount Chainrings for Race Face Cinch
$124.99 - $129.99
These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature a our patented Drop-Stop design for the best wear life, chain retention and mud clearance. We have both Boost and standard chainrings. - CNC machined aluminum ring fits Race Face cranks with Cinch System - Features Drop-Stop tooth design to prevent unwanted chain drop - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components Direct Mount Chainrings for SRAM Cranks
$119.99 - $129.99
Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. There are 3 offsets: - Standard: 47mm chainline, 6mm offset for cyclocross and road cranks - Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 - Boost: 52mm chainline, 3mm offset - BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset - If you have a BB30 crankset (30mm diameter Aluminum Spindle) this measurement will determine whether it is a long or short spindle:
Wolf Tooth Components Giant Cog
$79.95 - $139.99
- Extended range aluminum cog for those wanting 1x10 with a full range of gears - Only fits Shimano XT/XTR 11-36t (M771/M980) or SRAM X5/X7/X9/X0 11-36t 10sp cassettes (not compatible with 2011 and older SRAM derailleurs) - Requires removal of the 17T or 15T cog and spacer from existing cassette - Longer B-screw (sold separately) only needed for about 50% of Shimano derailleurs - May require a longer 10sp chain. Very tight fit on Stans 330 rear hub splines - Designed and manufactured in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components Shimano M9000/M9020 Chainring
$114.99 - $124.99
- Fits asymmetrical 96mm BCD with built-in threaded standoffs - Used on Shimano XTR M9000 and M9020 crankset (both race and trail models) - Features Drop-Stop tooth design to prevent unwanted chain drop - Mount using the stock Shimano XTR M7 chainring bolts - 49mm chainline for 28-34 tooth and 50mm for 36 tooth - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy - 41g (30t)
White Industries Freewheel
$159.99
The freewheel utilizes a sealed cartridge bearing instead of a loose ball system. There are two advantages to the cartridge bearing: It is sealed from elements like mud, grit, and water. The bearing is nicely contained in one simple unit, easily pulled and replaced when worn. The ENO freewheel features a machined inner driver and machined outer gear case resulting in a freewheel that runs concentrically without the tight and loose spots common to other freewheels. A 36 point engagement system and a case hardened, nickel electro-plated outer gear case make this freewheel a perfect addition to your single speed. For trials riders or those wanting a beefier version we offer the trials freewheel with 72 points of engagement and a thicker outer gear case to withstand the rigors of a more demanding style of riding. Sizes: 16t: blue locking ring, accommodates 3/32 chain only, Bearing size 6708 17t- 23t: red locking ring, accommodates 3/32 and 1/8 chain, bearing size 6808 18t,20t, 22t trials: green locking ring, accommodates 3/32 and 1/8 chain, bearing size 6808 16/18t DOS: blue locking ring, accommodates 3/32 chain only, bearing size 6708 17/19t, 20/22t DOS: red locking ring, accommodates 3/32 chain only, bearing size 6808 NOT compatible with 11/128 chains
White Industries White Industries Crank Arms | M30 | 175 | Black
$474.99
For a long time square taper was king, but in recent years the development of new axle standards have redefined crank and drive train standards. We, at White Industries, answer this change by offering the MR30 cranksets. The M30 is our mountain crank built around a 73/92mm bb shell with configurations compatible with 1x, 1x Boost, or 2x chain rings. Both the TSR 1x standard and boost rings are designed with narrow / wide tooth configurations, while the 2x utilizes our VBC, variable bolt circle, system whereby you are able to configure and choose your inner and outer ring to create the ideal gearing ratio for the type of riding you desire. Using a 30mm aluminium spindle allows this crank set to be light yet durable. Compatible with BSA, T47, and Press Fit systems, this new design brings a classic look to these modern cranks. Available in black anodized or silver polished with options of spicing up a set with colored extractor bolts. Chain rings are sold separately. Crank colors: black anodized Crank lengths: 175mm Material: 2024 al Weight: 575g * Chain line: 1x: 49mm 1x Boost: 52mm 2x: 47.5mm Q factor: 176mm *weight includes 175mm crank arms and spindle only
White Industries White Industries Road Crankset | Square Taper Road | Silver 175mm
$369.99
The VBC Road Crank set The VBC Road Crank set is machined from 2024 aluminum to give you a strong, stiff, reliable crank set. This crank set has been tailored made for road bikes with a narrow Q factor and light weight profile. It is also versatile allowing you to change your chain rings from single speed/1x rings with the ENO TSR to our VBC 2x rings. This crank has the dependability you need to get you out the door and on the road. Made in the USA SQUARE TAPER ROAD Crank Arm Material: 2024 aluminum BB type: JIS square Taper Crank length: 175mm Weight: 464 grams* Finish: polished silver Compatible with: single speed/1x ENO TSR rings VBC17 2x rings SOLD SEPARATELY
Whisky Parts Co. No. 7 Alloy Seatpost
$89.99
The Whisky No.7 Seatposts are made from the highest quality materials to be durable, lightweight, and comfortable. Whether you’re remounting during the cross race, or abusing them on the trail, you can trust Whisky’s seatposts. Available in different diameters and offsets. - Convenient finger adjustment of saddle angle - Unidirectional carbon shaft, forged aluminum head - No rider weight limit - 5 year Whisky warranty - ASTM Condition 3 - For rough off-road riding and jumps less than 24"
Whisky Parts Co. No.7 Seatpost
$139.99 - $144.99
Seatposts can be an overlooked part of the bike, but at Whisky Parts Co., everything gets the same attention to detail so your ride never suffers. Their seatposts are made from the highest quality carbon, ensuring they are durable, lightweight, and comfortable. Whether you’re remounting during a cross race or abusing them on the trail, you'll be glad you have the No.7. - Carbon shaft absorbs trail chatter - UD carbon shaft, forged aluminum head
Wheels Manufacturing Inc. 31.8 – 25.4 Handlebar Shim
$17.99
Shims for fitting 25.4mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 25.4mm - Length: 48mm - Machined Aluminum - Anodized Black
Wheels Manufacturing Inc. Aluminum Headset Spacer
$2.49 - $13.00
You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size
Wheels Manufacturing Inc. Derailleur Hanger 107
$45.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 170
$44.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 177
$69.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 2
$31.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring bolt
Wheels Manufacturing Inc. Derailleur Hanger 237
$69.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M3x8 flat head screw included
Wheels Manufacturing Inc. Derailleur Hanger 25
$39.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 27
$30.60
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 28
$25.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M3x10 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 41
$34.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 49
$30.60
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 53
$35.90
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 57
$41.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 65
$39.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt (Long - Bolt Only)
Wheels Manufacturing Inc. Derailleur Hanger 83
$29.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Page 1 of 63 Next page