Indoor Cycling

This freehub supports '18, '20 Edition KICKR, KICKR V6 and KICKR CORE with most* Campagnolo 10, 11, and 12 speed cassettes. The freehub for the KICKR 14 and 16 is no longer available. *Campagnolo cassettes with 8 inner arms on the largest cog are NOT compatible with the KICKR ’18/KICKR V6 and KICKR CORE version.

- Rear tire specially made for indoor trainer - The compound has a much lower internal resistance

Better health. Faster splits. More me-time. Whatever your goals may be, the Fluid2 helps you get the most out of each indoor training ride. The large, precision-balanced flywheel (with patented fan design) lets you easily customize each ride simply by shifting gears, just as you would outside. This design also helps keep your Fluid2 working better – longer. And, thanks to our built-to-last manufacturing process, the Fluid2 can help you conquer one goal after the next. - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Best-selling trainer in the USA - Compatible with Zwift and other indoor cycling apps

Have another rider in your household who prefers a different saddle? Grab a second seat mast and swap them out in seconds between rides. With 335mm of height adjustment, 80mm of fore/aft adjustment and permanent laser-etched scales, it's quick and easy to dial in your precise fit every time. - Universal saddle clamp works with most saddle rail designs - Saddle not included

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season.

The Robert Axle is designed to replace your standard thru-axle to accommodate a resistance or wind trainer. Simplify your race day routine! Bring your best bike. Use the Robert Axle on your trainer, then leave it on to race, if you wish. - Axles are precision CNC machined, AL7075 - Includes x1, 6mm spacer (to convert to 175mm) - Hard anodized for durability, Black - Includes stainless steel axle ends - To install or remove rear wheel, end caps have been drilled to allow the use of a 6mm hex key; no special tools required - Designed, built and tested in the USA *** Note: Length dimension refers to the length of the axle shaft. All axles are compatible with +/- 2mm ***

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. This axle will replace the R.A.T. axle found on all Cervelo R.A.T. equipped bikes. In addition to this axle, we include our replacement derailleur hanger with traditional threads. This axle combined with the replacement derailleur hanger will provide a complete threaded thru-axle system. Our derailleur hanger matches the geometry and construction of the stock derailleur hanger in every way for crisp shifting performance. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - This axle is specific to bikes with Focus R.A.T. thru-axles and 12 x 142. Includes a replacement R.A.T. nut. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end, and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5 mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

Misuro B+ is the perfect sensor to enhance your training sessions with Elite home trainers and rollers. This ANT+ and Bluetooth Smart Speed/Power/Cadence sensor monitors indoor training sessions via smartphone, tablet, cycle computer, or compatible GPS devices when installed on an Elite trainer. - Reads data based on the type of trainer used. - Uses ANT+ and Bluetooth Smart protocols that are compatible with many devices. - When paired with the My E-Training Software, it turns your Elite trainer into an advanced digital instrument that displays and manages fundamental training data.

SUITO-T is the Elite Suito home trainer without supplied sprocket cassette, a powerful and compact model that offers total compatibility with several types of bicycle. Powerful, solid, and quiet, SUITO-T is an interactive home trainer designed to offer a realistic, accurate, and fun bicycle workout experience. Featuring direct transmission to ensure increased accuracy and quietness while working out, the SUITO-T is very stable trainer even during the most intense sprints, and its small size makes it easy to transport and store everywhere. What's the difference between a Suito and a Suito-T? - SUITO and SUITO-T are two identical home trainers, featuring the same technical specifications both in terms of structural and electronic features. - What separates them is the sprocket cassette, which is included in the Suito but not included in the SUITO-T. Compact design - The main feature of this home trainer is the sturdy steel structure, ideal to ensure durability and stability even during intense sprints. - Featuring an elegant and solid profile, SUITO-T has a wide support base with pre-assembled support legs. Just position them properly to trigger the automatic lock mechanism. - SUITO-T is designed to ensure a small footprint wherever you go: its integrated handle, reduced size, and slim profile makes it easy to transport and store everywhere without worrying about its footprint. - SUITO-T optimized design makes it compatible with various bicycle models and commercially available sprocket sets. Accurate and powerful bicycle workouts - SUITO-T simulates gradients up to 15% with ± 2.5% accuracy, one of the most powerful home trainers you can use to release all your power even during the most intense sprints. The following functions also contribute in displaying accurate workout data: - Power Meter Link (PML): It's a function that lets the home trainer employ an ergometer that's already installed on your bike as a power source. - Spindown: A calibration procedure for the home trainer that takes into account all friction values that change over time and during use that influence brake's accuracy and compensates its effects on the resistance generated by the home trainer. - Temperature compensation algorithm: A function that lets the home trainer compensate the variations due to brake overheating and take the resulting data into account when calculating power. Train on Zwift and My E-Training! - Discover all the software you can use with SUITO-T: other than Zwift and My E-Training, you can also manage it with all other indoor cycling platforms such as TrainerRoad, Kinomap, Rouvy, Bkool, Bikevo and many more. - SUITO-T adds up to the Elite home trainers' range of ANT+ FE-C & Bluetooth home trainers that interact with every app, software, computer and device (smartphones and tablets) via iOS, Android, MacOS and Windows. Just choose the software, select the course or training program and start pedaling on your bike. SUITO-T will automatically adjust resistance. Sensorless cadence - All home trainers by Elite immediately send power, speed, and cadence data, thus setting themselves as effective instruments to build an accurate training program and replicated outdoor workouts as much as possible. Cadence is measured via a practical sensorless technology (that is, no sensors to apply to your bicycle) and is calculated on the SUITO-T as a function of speed variations.