Write a Review

The Velo Orange Grand Cru seatpost is made from one piece of aluminum, internally ovalized to trim weight. The Grand Cru seatpost’s head is integral with the post – not pressed on – for great strength and weight savings. 0mm Setback: Zero-setback/offset posts are commonly used on mountain bikes and by some bikepackers. The Grand Cru zero setback post uses a one-bolt, ergonomic side-adjustment mechanism for both saddle rail clamping and fore-aft adjustment. 30.2mm Setback: For riders who prefer the comfort of leather saddles but have found proper saddle placement difficult due the short rails on leather saddles Velo Orange offers the Grand Cru Long Setback with an ample 30.2mm of setback. This model uses a two-bolt design.

- The ATAC EASY 10° cleat works with all TIME mountain pedals. - Included with mountain pedal models numbered "2" and "4." - Release angle of 10 degrees and is compatible with all two-hole cycling shoes. - Don't let the "Easy" name fool you. If you are a high-performance rider looking to reduce the release angle from our 17 or 13 degrees, this is the choice for you.

Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.1mm thick so they work well with 9-speed chains.

Wider than the Clarence, with more room for accessories in the middle - 6061-T6 aluminum with 135mm straight section at the center - Forward bend from clamp area negates the need to change stems to make up for the grip area sweep

Shimano's 105 Rear Derailleur delivers high-end function with upscale looks. With a body of light, durable cold-forged aluminum in Shimano's wide-pivot design with their light-action spring, rear shifting is practically effortless and always super smooth. The top pulley stays a uniform distance from each cassette cog ensuring that every shift resonates with the plunk of exact gear engagement.

- Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Drivetrain Speeds: 8

The Shimano Altus RD-M310 rear derailleur is a quality, durable replacement rear derailleur for 7 and 8-speed drivetrains. - 13t upper and 15t lower pulleys - Maximum cog size: 34t - Total capacity: 43t

Claris HG50 cassettes ensure a durable and low maintenance system that's easy-to-operate, with accurate and light-action shifting for Shimano 8-speed drivetrains. - Nickel plated finish for corrosion resistance - Steel lock ring - MODEL NO: CS-HG50-8 - SERIES: SHIMANO CLARIS R2000 Series - Compatible chain: CN-HG71 - Speeds: 8-speed - Type: HG

• Lightweight seal structure removes grams • Durable anodized finish • Includes left and right hand cups, spacers, inner cover, and inner o-rings • Easy installation with TL-FC25 tool • Compatible with 24mm crank spindles • English, threaded: 68/73mm bottom bracket • Pressfit: BB86/92 bottom brackets

Shimano XT CS-M770 9-Speed Cassette - Aluminum carrier reduces weight and increases rigidity - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Weight: 323 grams

Shimano H03C Metal Disc Brake Pads keep you in control in any conditions with cooling fins for those endless, grin-inducing descents.. - Fits Saint BR-M820 and Zee BR-M640 calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability - Aluminum radiator cooling fins increase pad life and reduce brake fade

PD-EH500 pedals FEATURE - One side SPD, the other side flat - Light action binding makes frequent stepping-in & out easier - Better grip on flat side for wet condition BENEFIT - Convenient road touring pedal - Optimized for urban riding - Multi-condition - Best match with CT or MT shoes

Shimano Tiagra CN-4601 10-Speed Chains - For Ultegra 6703 and 105 5703 triple drivetrains, please see 10-Speed Hyperglide non-directional chains - Hyperglide 10-Speed chain - Not compatible with Shimano 10-Speed Dyna-sys mountain bike drivetrains - Directional inner and outer plates designed for better contact with gear teeth allow smooth shifting even under high load conditions - Chromized rivet pins improve wear resistance - Perforated plates for reduced weight - 116 links

The Shimano Deore XT CS-M8100 12-speed cassette is optimized with rider-tuned wide-range and close step gear combinations for MTB excellence. - Shift ramp designs provide fast and smooth shifts by HYPERGLIDE+ technology - Light and stiff construction reduces cassette inertia resulting in faster acceleration and increased chain security - Designed with a Shimano Micro Spline body that features smaller and more widely distributed splines to limit cog damage on freehub - Cassette Body Type: Shimano Micro Spline - Cassette Cogs: 10-12-14-16-18-21-24-28-33-39-45-51 - Drivetrain Speeds: 12 - Range: 10-51

- 9-speed compatible - XT/Ultegra - 116 links

Riders want the derailleur to do its job shifting on command, whether under climbing load or the stage finish. The GX Eagle derailleur gets it done with an updated cage architecture that improves chain management. Refined to work with the new 10-52T cassettes, it's also backward-compatible with 10-50T cassettes for greater versatility and incremental upgrade. It's finished with the new GX Eagle master colorway to complement any cassette and chain colorway a rider wants from the Eagle Colorsystem. - Backward-compatible—works with both 10-50T and newer 10-52T cassettes - Updated cage architecture provides better chain retention and precise shifts

This new NX Eagle derailleur features the proven SRAM 1x-specific X-HORIZON design. The larger, 14-tooth X-SYNC lower pulley easily facilitates 11- to 50- and 10- to 50-tooth cassette capacity, and also adds to NX Eagle's overall smooth-pedaling feel. The Type-3 ROLLER BEARING CLUTCH provides quiet, consistent performance and durability. - Eagle technology provides an expanded, optimum, gear range making you fast on the flats, giving you control on the climbs and unleashing your speed on the descents - Eagle is a complete drivetrain system that was developed to be an integrated high-performance ecosystem. The engineering and testing that went into the development provide for maximum performance, safety, and long-term durability to ensure a great consumer ride experience. We guarantee this performance when Eagle drivetrains are used as a complete ecosystem. For additional information, please contact your SRAM Sales Contact. - Completely new rear derailleur incorporating our proven X-HORIZON design and new Type-3 ROLLER BEARING CLUTCH technology - Eagle ecosystem-engineered mounting system and CAGE LOCK positioning add robustness - Eagle pulley technology provides greater efficiency, crisper shifting and quieter operation - Speed (RD): 12s - Cable pull ratio: X-actuation - Cage (RD): Long - Max tooth: 50 - Color (RD): Black - Pulley bearings material: Steel - Cage material (RD): Steel

SRAM's PC-1 Single Speed Nickel Chain is designed for singlespeed bicycles so it won't jump off when you're laying down the power. It comes with a connector link for easy installation and removal.

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

- SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Improved aerodynamics for time trial and triathlon

Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. - KEB-SL - linear strand, Kevlar reinforced, compressionless brake housing with Slick-Lube liner - Perfect for full-housing, high-performance bikes with mechanical disc or rim brakes - 20 black alloy lined end caps, 10 black POP end caps included

The FSA Alloy Cup JIS bottom bracket is suitable for Italian threaded interfaces. - Alloy cups - Double "snap" seals for water and dirt protection - Spindle Interface Type: Square Taper JIS

- Left and right bottom bracket cups with standard bearings for FSA MegaExo cranks - BB-9050 is for 24mm spindle 68/73mm MTB K-Force and Team Issue cranks - BB-8681 for K-Force Light (a non-ceramic option) and SLK Light Road MegaExo cranks (BB-8681 bearing covers have been redesigned so that the spindle now rides directly on the bearing itself) - BB-7000 is for 24mm spindle 68/73mm shell MTB Gravity Lite, Moto X and Afterburner cranks - BB-7000 is for 24mm spindle 83mm shell MTB Gravity Lite cranks - BB-6200 is for 24mm spindle 68mm shell Energy, Gossamer and Omega No Bolt Design cranks - BB-6000 is for 24mm spindle 68mm shell Energy, Gossamer and Omega cranks - BB-4000 is for 19mm spindle 69mm shell Omega cranks - BB-1000 is for 19mm spindle 68/73mm MTB Gamma cranks - 1.37" x 24tpi (English threads) or M36 x 24tpi (Italian threads)

Rebuild seal kits for Fox rear suspension service and repair. - Includes parts needed for rebuild

Easton’s new AX series now includes our budget friendly EA50 AX flared drop bar. With the same MCD drop technology as our top of the line road bars, flared to 16 degrees for comfort in the drops and control on gnarly terrain or long gravel assaults. It's time to take the road less traveled with EA50 AX. - Finish: Black Ano/Water Transfer Graphics - Bar weight: 325g (42cm) - Clamp diameter: 31.8mm - Width (center-to-center): 40cm, 42cm, 44cm, 46cm - Flare: 16-degrees - Reach: 80mm - Drop: 120mm - Materials: EA50 alloy

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: 10-15 (us) // 43-49 (eu) - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown

Burgh's Hex Bar Tape features a repeating honeycomb pattern, representing the structure that houses the liquid gold we all love, the nectar of life, the syrup of the gods-honey. Perfect for those hard-working bees, ah sorry-riders that slog it out all day into those nasty headwinds, chase down the breaks and bring you back to the bunch after a nasty crash. Yet they still have enough left in the tank to sting you up those punchy climbs. - Tape Weight: Combined Weight 65g / Single Roll 32.5g - Dimensions: 200cm (L) x 3cm (W), 2.5mm thickness, tapering to 1.8mm at edges - Includes: 2x End Plugs, 2x Finishing Tape Strips