Parts & Accessories

Looking to take your second-generation Flux headlight off-road? You're going to need a helmet mount. - Breakaway design prevents snagging on overhead objects - Hook-and-loop strap can be reoriented 90 degrees to give additional mounting options - Fore/aft adjustability for optimal placement regardless of helmet vents - Action camera style hinge works with third-party mounts

- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)

The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series

Lights, Camera, You Name it The Accessory Mount is a great solution for attaching your GoPro-style mount to your helmet, seatpost, handlebar, selfie-stick or just about anything else. The banded system offers easy attachment, the 270 degree rotation helps you position your camera so that you can get the shot every time, and the omni-directional breakaway feature will take the hit in a crash (possibly saving your camera equipment). With the Accessory Mount, your imagination is the only thing holding you back. Features - Omni-directional breakaway, 270 Degree Rotation

For CubiCubi 1200 Lighthead - Cartridge battery - 1200 Lumens / 6000 mAh battery - Charge phone and other devices with USB charge cable - Recharge via a micro-USB cable

For CubiCubi 850 Lighthead - Cartridge battery - 850 Lumens / 3000 mAh battery - Charge phone and other devices with USB charge cable - Recharge via a micro-USB cable

For CubiCubi 500 / 850 / 1200 - Charges two batteries simultaneously

There are those among us who like to keep the cockpits of our bikes neat and tidy, and we'll seek out any means necessary to do so. This mount gives you the option of position your Flux light beneath your computer head unit by using an action-camera type attachment. - Keep your Flux light out of the way by mounting it underneath your computer head unit. - Works with any computer mount that includes a bottom mount for action cameras. - Not for helmet use.

Increase your visibility by using the Stix Arm/Leg Band mount to attach your Specialized Stix light to arms and legs. - Includes rigid mount and fabric band for comfortable and secure hold. - Wraps around ankle to keep pant legs away from chainrings. - Increases visibility and versatility of Stix lights, both on an off the bike.

Stick a Stix on it. This fabric clip mount makes it a cinch to clip your Specialized Stix to a bag, jacket, or jersey for on-the-go visibility. - Stainless steel spring clip for secure mounting.

You really can put a Specialized Stix headlight almost anywhere. This headlight mount is designed to cleanly integrate into the headset of the bike and maintain a clean look with the Stix positioned just under the stem. - Positions Stix headlight just under the stem in front of the head tube for a super-clean, integrated look. - Interlocking system between plastic mount and aluminum spacer allows the light and mount to quickly be removed from the bike. - Works with 1-1/8th Aheadset-style headsets and custom 10mm thickness spacer.

Mounts a Specialized Stix light to a CPSC, DIN standard reflector/rack bracket or the Specialized Pizza Rack. - Vertical CPSC hole pattern. - This mount can attach to the Horizontal Din hole pattern. - Specialized single hole pattern for the Pizza Rack. - Mounts Stix light horizontally. - Includes all mounting hardware.

The Gino Light Mount provides a mounting point for handlebar lights wherever there is an M5 threaded eyelet on your frame. - 6061 Aluminum - 30g - 26.0mm outside diameter - 5mm mounting bolt

For those that ride with the sleek performance of Aero handlebars, NiteRider offers a light mounting solution that allows for increased visibility and safety while you're out clocking in those high-speed miles. With the proper strap tension set, the Aero Handlebar Mount is secured in to place delivering a high degree of stability by way of the soft rubber pad under the mount. Enjoy all the benefits of Aero handlebars, while increasing your road visibility with NiteRider Lumina or Mako Series lights and the Aero Handlebar Mount. Fits all Aero style handlebars. SYSTEM COMPATIBILITY - Lumina Series - Mako Series - MiNewt Cordless Series

The NiteRider Double Taillight Rack Mount allows for the installation of 2 NiteRider taillights. It attaches securely with the rack mount for that perfect fit. It features a quick release tab on each mounting point that allows you to remove just your taillight, leaving the whole mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. SYSTEM COMPATIBILITY - Sentinel - Omega 330 - Solas - Sabre - CherryBomb - TL 5.0 SL - Vmax+ 150 NOT COMPATIBLE WITH Emax+ 150, OMEGA 300, SENTRY AERO 260, AND BULLET 200 TAILLIGHTS

The NiteRider Double Taillight Seat Post Mount allows for the installation of 2 NiteRider taillights. It attaches securely with the clamp mount and rubber shims for that perfect fit. Fits seat posts with a 22mm-34.9mm diameter. It features a quick release tab on each mounting point that allows you to remove just your taillight, leaving the whole mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. SYSTEM COMPATIBILITY - Sentinel - Omega 330 - Solas - Sabre - CherryBomb - TL 5.0 SL - Vmax+ 150 NOT COMPATIBLE WITH Emax+ 150, OMEGA 300, SENTRY AERO 260, AND BULLET 200 TAILLIGHTS

The Explorer headband adjusts to various head shapes and sizes. System Compatibility: - Explorer 350 - Pro Series - HID Series - Classic Plus & Seclect - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

The NiteRider Hardshell Helmet Mount gives you the option to mount your head light directly onto your hardshell helmet using high strength 3M VHB adhesive. ?Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

AC Adapter for the NiteRider Lumina Dual 1800 Front Bike Light. Recharges a completely depleted battery in 3 hours. SYSTEM COMPATIBILITY Lumina Dual 1800 LED Head Light

Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series

The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light! System Compatibility - Lumina Series - MiNewt Mini Series - Mako Series

The NiteLink remote allows the rider to pair and simultaneously power on/off the Lumina Max headlight and Omega EVO 300 taillight wirelessly. - All New design equipped with NiteLink Wireless Technology - Lights sold separately

If you're looking to mount your NiteRider PRO series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. SYSTEM COMPATIBILITY - PRO Series Not compatible with Lumina Pro lighting systems

If you're looking to mount your Lumina and Mako series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. System Compatibility - Lumina Series - Mako Series

For those that ride with the sleek performance of Aero handlebars, NiteRider offers a GO Action Camera mounting solution. With the proper strap tension set, the Aero Handlebar Mount is secured in to place delivering a high degree of stability by way of the soft rubber pad under the mount. Enjoy all the benefits of Aero handlebars, while being able to mount your Go Action Camera to record all your adventures! FEATURES - Fits all Aero style handlebars. - Stable and secure accessory mount. - Lifetime Guarantee against material or manufacture defects. - Damages due to abuse or crashing excluded. - Weight: 30 g

Dual mounting for phone and/or GPS on handlebars. The NR GO ActionCam C2 Handlebar Mount features 2 Action Cam style mounting points. If you're looking for options to mount various accessories, NiteRider Lumina, Mako, or Pro series lights (ActionCam mount adapter required, see Lighting System Compatibility below); this is the accessory you've been looking for. LIGHTING SYSTEM COMPATIBILITY - Lumina and Mako Series (ActionCam Lumina / Mako mount adapter required SKU#4005) - Lumina and Mako Series (K-Edge Aluminum ActionCam Lumina / Mako mount adapter required SKU#4000) - Pro Series (ActionCam Pro Series mount adapter required SKU#4011) FITS HANDLEBAR SIZES 22mm—31.8mm

The NiteRider Omega 300 Seat Post Straps install quickly and easily with the loop around and hook design. - Compatibility: Omega 300 Tail Light only - Fits 27.2mm seat posts

Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems