Closeout Deals

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

Lower mount kit for all Salsa's Alternator Racks (sold separately)

Lightweight and durable 2D forged-alloy stem. - Removable faceplate for easy bar installation - 4-bolt clamp for optimal handlebar support - High rise for improved riding comfort - 35 degree rise

Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.2 - 2.3mm thick so they work well with wider chains.

Burgh's Hieroglyph Bar Tape is a throwback to Egyptian times. Using a grid-based formula, some funky looking elements, and of course a few X's here and there, this tape is subtle enough even for the conservative, but wouldn't look out of place anywhere. - Tape Weight: Combined Weight 65g / Single Roll 32.5g - Dimensions: 200cm (L) x 3cm (W), 2.5mm thickness, tapering to 1.8mm at edges - Includes: 2x End Plugs, 2x Finishing Tape Strips

The Hillbilly BLCK DMND 2Bliss Ready tire is a perfect option for front tire use when the course features intermediate to soft terrain. When the soil is changing from hard to soft, the small blocks penetrate the ground surface and better connect you to the trail. Small surface center knobs also increase the load on the ground and help surface penetration, while the shoulder knob row provides support in fast turns on all surfaces. Our GRIPTON compound, meanwhile, improves high frequency damping, better attaching the tire to the ground over small bumps and rough sections alike. This means that the low frequencies of the rolling tire deflections pass through unfiltered, leaving no energy to be absorbed and keeping your speeds high. The new BLCK DMND casing strikes the balance between suppleness and extreme pinch flat protection. In order to descend all-out, you need as much traction as possible—the tire needs to conform and hold on to the ground, but also protect from pinch flats. In order for this to happen, only the treaded part of the tire needs to conform, grip, and dampen, while the tire base offers stability and support for steering inputs. - Casing: Center Overlap, Flip Up and Rubber Apex - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON - 29 x 2.3", psi 25-50 - 29 x 2.6", psi 20-40

A cargo-carrying classic There are so many possibilities for this extra large rattan basket, adding true utility to your bike. Fill it with groceries, a table lamp or even your little dog. Please note, this basket requires a front or rear rack, sold separately. Cable ties are provided with purchase for installation. - Dimensions: 17"(w) x 8"(h) x 12"(d) - Volume: 20 Liters

Tap into a comfortable fit, uncompromised flexibility, and medium arch support with the Petra VR shoes—ready for adventures on both road and dirt. The Petra VR is a versatile shoe that combines performance-riding features like clipless pedal compatibility with the walkability and comfort of a light hiking shoe. The shoe's upper is made from a supple, breathable microfiber and mesh and matched to an injected inner shank to help power transfer to the pedals. This is a true cycling shoe that doesn't compromise the flexibility you need when you're walking on the trail.

The Cambium C19 All Weather is a wider saddle made for an upright riding position, for commuting in the city. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride”, thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass reinforced back plate has loops for a saddle bag or other accessory.

Whether you're on the bike or off, on roads, trails, your daily commute, or an adventure off the beaten path, Giro's Rumble VR is your any-time, anywhere shoe. It mixes high-performance cycling-specific features, like clipless pedal compatibility and a stiff, power-transferring footbed, with the comfort of a lace-up closure, a soft, breathable upper, and an utterly walkable Vibram sole. The Rumble VR is a true cycling shoe that doesn't compromise off-the-bike comfort and versatility. - Cleat compatibility: SPD-style cleats

HIGH PERFORMANCE TRAIL-CONQUEROR All new Flume combines advanced off-road footwear technology with bike-specific performance to offer a trail flat shoe that's designed to outlast the biggest epics. The Cordura upper is breathable and lightweight, but also trail-tough and protective with a stitch-free and fully welded construction. The new adaptable outsole has a supportive pedal contact area featuring our MAX GRIP rubber for a confident connection with the pedal when charging the trail ahead. Compliant reverse hex traction in the toe and heel make easier work when hiking becomes necessary. Features: - MAX GRIP rubber outsole - Hexagon outsole featuring reverse hex traction pattern on toe and heel for hike-able climbs and descents - EVA midsole provides support and shock absorption - D3O High Impact Zone Technology insole absorbs impact and reduces fatigue - Lightweight bonded upper featuring Cordura mesh for durability and breathability - Anti-bacterial mesh lining controls odor - Fully gusseted tongue prohibits intake of dirt and debris - Elastic lace tuck to keep laces secure - TPU mud guard to protect against dirt, debris and rubbing - TPU toe and heel protection with reinforced anti-abrasion film - Heel pull tab for easy entry

HIGH PERFORMANCE TRAIL-CONQUEROR All new Tallac combines advanced off-road footwear technology with bike-specific performance to offer a trail flat shoe that's designed to outlast the biggest epics. The Cordura upper is breathable and lightweight, but also trail-tough and protective with a stitch-free and fully welded construction. The new adaptable outsole has a supportive pedal contact area featuring our MAX GRIP rubber for a confident connection with the pedal when charging the trail ahead. Compliant reverse hex traction in the toe and heel make easier work when hiking becomes necessary. Features: - MAX GRIP rubber outsole - Hexagon outsole featuring reverse hex traction pattern on toe and heel for hike-able climbs and descents - EVA midsole provides support and shock absorption - D3O High Impact Zone Technology insole absorbs impact and reduces fatigue - Lightweight bonded upper featuring Cordura mesh for durability and breathability - Anti-bacterial mesh lining controls odor - Fully gusseted tongue prohibits intake of dirt and debris - Elastic lace tuck to keep laces secure - TPU mud guard to protect against dirt, debris and rubbing - TPU toe and heel protection with reinforced anti-abrasion film - Heel pull tab for easy entry

The extra width of the Dillinger 5 provides flotation over loose snow additional grip while turning, accelerating or braking on ice and packed snow. Available in both studded and non-studded configurations. The studded version comes with 258 concave, aluminum carbide tip studs to provide extra bite and increased durability. - Carbide studs grip ice - Braced side lugs improve cornering - Tubeless Ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

Dress up your bike with the beautiful, functional Linus Market Bag. Made from rugged waxed canvas, high-quality leather, and solid brass hardware, this pannier set adds a touch of vintage charm to any ride. Even though they’re big enough to handle a week’s worth of groceries, they roll up neat as can be when you’re not using them. They also come with a padlock to secure them to your rack and a removable shoulder strap for easy carrying when you’re off the bike.

The Defroster Road shoes feature a seam-sealed bootie construction with Thinsulate® insulation, and a neoprene collar to help keep the elements away from your feet, keeping them warm and dry. The boots have a Specialized Body Geometry sole and footbed, which is made from a nylon composite material; “ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment”. They utilise Thinsulate® 400 gram insulation for warmth and have a waterproof, seam-sealed internal bootie. There is also a reflective heat-loss barrier in the sole.

When the course profile looks like a saw blade or you simply demand the best, choose Giro's Prolight SLX II shoes to get you to the top. Their stiff, yet feathery Easton EC90 SLX carbon soles provide the perfect platform for your feet so you can enjoy maximum pedaling efficiency and unrivaled comfort. The svelte soles are connected to soft-yet-durable Teijin microfiber uppers, and an offset middle strap prevents pressure points to help keep your feet in line during max efforts. Plus, all of the hardware is titanium and the light SuperNatural Fit Kit footbeds with anti-microbial treatment get the weight down to a mere 205 grams! Your polka dot jersey awaits.

Step up to the completely new Yakima bar. Thoroughly wind-tunnel tested, the black JetStream's JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. Shopping for a full Yakima Roof Rack System? Use our Fit My Car tool to get outfitted with everything you need for a Base Rack System. - Comes with 2 Crossbars and 4 Endcaps - Wind-tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Seamless extruded aluminum construction is light, strong and sleek - JetTruss internal support engineering adds serious strength for minimal weight - T-slot with SmartFill push-down infill for easy mount attachment and efficient airflow - Clear anodized alloy finish and high-gloss polymer end caps look awesome on your roof - Streamline crossbars are compatible with any StreamLine Tower - Need an adapter? Mighty Mount 39H will let you mount round and square bar accessories on your JetStreams - Find the right bar style and length to fit your needs - Compare four crossbar styles and features to learn more

A traditional round drop meets modern materials and the result is 3T's Rotundo LTD. It's constructed of high-modulus carbon fiber with varying wall thicknesses that results in a lightweight and strong bar that's also super stiff for sprinting and climbing. Double cable grooves provide a smooth feel when you're on the tops.

"The PCS-9.3 is a basic folding bicycle workstand designed and built for the home mechanic – a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with a locking support yoke and upgraded internals for extra dependability. The PCS-9.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.* The PCS-9.3 quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-9.3 is the perfect way to upgrade your home shop. NOTE: The maximum weight capacity of the PCS-9.3 assumes the weight is centered below the clamp and between the legs.? - Fully adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Durable textured powder coat finish - Maximum weight capacity: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 44"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg) - #2848A quick-release collar with accessory pods required for use of PTH-1 Paper Towel Holder or 106 Work Tray"

Elite Qubo Power Fluid Trainer offers exponentially progressive fluid resistance of 540W @ 40km/h, up to 1,200W @ 60km/h - Elastogel roller reduces noise and tire wear - My E-Training App & Desktop 1 month free - Compatible from 20- to 29-inch wheels

Originating from the conceptual standpoint of a mountaineering boot, the new and evolved Wolvhammer is lighter, more comfortable, and grippier. The overhauled design features a removable synthetic liner and a three-piece proprietary bottom assembly compatible with flat and clipless pedals. When the cold winter creeps in, Wolvhammer has you covered. - Removable synthetic liner boot for quick drying - 3-piece proprietary bottom assembly is lighter, warmer, and offers more walking traction - Aerogel insulation blocks cold cleats and allows use of preferred insoles without sacrificing warmth - Real rubber outsole with microglass lugs. Comes with removable cleat plate for flat pedal use - Single-zone BOA closure with a gusseted tongue to keep winter elements out and warmth in - Suggested temperature range: 0° F (-18° C) to 25° F (-3° C)

Better health. Faster splits. More me-time. Whatever your goals may be, the Fluid2 helps you get the most out of each indoor training ride. The large, precision-balanced flywheel (with patented fan design) lets you easily customize each ride simply by shifting gears, just as you would outside. This design also helps keep your Fluid2 working better – longer. And, thanks to our built-to-last manufacturing process, the Fluid2 can help you conquer one goal after the next. - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Best-selling trainer in the USA - Compatible with Zwift and other indoor cycling apps

3 years of REVIVE out in the market resulted in another benchmark product for BikeYoke: REVIVE 2.0. The new extralong 213mm REVIVE required a lot of re-thinking and re-engineering the whole chassis structure and since we think they deserve it, the shorter REVIVES will also get all the nice updates, and benefit from what was originally implemented only for the longest sibling of the REVIVE family. Noteworthy updates of the REVIVE 2.0 include: - One piece 3D-forged upper tube unit for improved stiffness and strength - Fully hard-anodized pin seats in the upper tube for improved corrosion-resistance - CNC-finished actuation lever for even smoother engagement - New upper saddle clamp and saddle bolts with integrated conical washers for even simpler saddle installation Wanna know more about the REVIVE? What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers? Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike? BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off. Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth. And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before. To understand the benefits over other posts you have to know about the problems of many current designs first. Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced. That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of. The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”. Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down. And here is where the patented RESET VALVE comes into play: - Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand. - This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike. So, now one might already understand that: - No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings. - No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design - The hydraulic system can be reset to “new” via the unique “REVIVE-valving” - This means the hydraulic circuit is a very stable closed system and basically maintenance free. Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability: - Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play. - Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes. 1 set REVIVE dropper post includes: - 1x REVIVE Seatpost - 1x cable housing 1500mm - 1x inner wire 1700mm - 2x housing endcap - 1x barrel cable clamp - 1x air valve adapter - 1x Quick-Reset-Lever - 1x remote (optional) - 1x BikeYoke I-spec adapter or Splits Clamp (optional) - 1 set titanium saddle bolts and nuts (optional)

Introducing Tuo, Elite’s new indoor home trainer created in cooperation with Adriano Design. Tuo is an interactive wheel-on home trainer featuring automatic resistance adjustment. It’s a reliable technological companion with a compact design, created to seamlessly fit in any part of your house and to take your training sessions to the next level. It exudes a Made in Italy design that's both understated and distinctive, and that makes it fit right in with your living room or office furniture when not in use. Tuo features a solid, compact structure made with high-quality materials: aluminum resistance unit, steel frame, and legs made of beechwood—one of the most beautiful, sturdy, and solid materials used in interior design. Beechwood is not just about the look though, it’s also perfect for absorbing vibration while training and for ensuring great stability. Additional features include stability-enhancing, anti-slip rubber feet and the Fast Fixing locking system—by engaging a practical lever, you can hook and unhook the bicycle to the support frame in a single quick operation. Light and easy to transport, Tuo features easily foldable frame and legs, so setup is immediate, anytime. Tuo is not just very compact and gorgeous to look at, it’s also quiet. The roller is made in Elastogel material, which is an exclusive polyurethane molecule developed and tested by Elite to limit friction noise by 50% and decrease tire wear. Thanks to the practical side micro-adjustment mechanism and the ability to easily reposition the stand for 29-inch wheels, bicycle setup is simplified. Tuo is the most versatile among our home trainers, as it is compatible with frames with wider chainstays and includes all the necessary adapters to install bicycles with rear axles ranging from 130x5mm quick release to Boost 148x12mm thru-axles. Tuo is a smart, interactive home trainer that connects with multiple apps, software, computers, and devices (smartphones and tablets) with iOS, Android, OSX, and Windows. Data transfer between the trainer and other areas of the system is wireless. Using this feature allows you to manage resistance levels and change display parameters, for convenient personalization and interactivity on your indoor training session. Tuo sends Power and Speed data and can be managed via the My E-Training software (12-month free subscription) or other indoor cycling services, such as Zwift, TrainerRoad, The Sufferfest, Bikevo, Kinomap, and many more.

The Express is a simple, fun, single-speed bike with mountain riser bars for a comfortable riding position for commuting. Single Speed steel frame with 130mm rear spacing for 700c wheels Rack, fender, and two sets of water bottle mounts Rim brakes English 68mm bottom bracket 27.2mm seatpost Approximate max tire width: 42mm Sizing Small/Medium: 5'2" - 5'8" height Medium/Large: 5'6 - 6'0" height

The Third Ward is a classic Dutch style step through bike. Named after Milwaukee's historic Third Ward, this upright steel 3 speed bike is perfect for cruising around town and is geared for the city or neighborhood. Built around a simple and reliable Shimano 3 speed hub with an easy to use twist shifter, this bike features elegant 1 color paint and simple styling. Finished off by matching painted fenders, painted chain guard and a built in rack, this bike is perfect for any city.

Classic looks with modern features The Downtown is Breezer's classic chromoly steel town bike, equipped with 700c wheels and matching fenders plus a chainguard, rear rack, kickstand, and bell. It's available in eight sizes with Joe's sprightly town bike geometry and a 7-speed drivetrain operated by an easy twist shifter. Downtown is a remarkably effortless, fun, and elegant way to get from Point A to Point B. Never before have fashion and function existed in such harmony. - Matching fenders and chainguard - Breezer chromoly-steel step through frame for easy stopping and starting - 700c wheels and tires with puncture protection and reflective sidewall - Rear Rack

The Ridgemont is a bit of an oddball bike that we think is both practical and enjoyable. When the bike path ends, the Ridgemont keeps going with 2.0" wide 27.5" tires and stable MX bars. The laidback and rugged steel frame makes the bike both comfortable and strong. The hills are tamed by 8 easy-to-use gears that you pick with just one click of your thumb. Not a "normal" around town bike, nor a hardcore mountain bike, the Ridgemont is a bike that is simply fun to ride where ever you end up. Sizing Small/Medium: 5'2" - 5'8" height Medium/Large: 5'6 - 6'0" height

The Ridgemont is a bit of an oddball bike that we think is both practical and enjoyable. When the bike path ends, the Ridgemont keeps going with 2.0" wide 27.5" tires and stable MX bars. The laidback and rugged steel frame makes the bike both comfortable and strong. The hills are tamed by 8 easy-to-use gears that you pick with just one click of your thumb. Not a "normal" around town bike, nor a hardcore mountain bike, the Ridgemont is a bike that is simply fun to ride where ever you end up.