Other

This is a pair of spacers that adapts a 386 EVO crankset to a 68mm BB30 or PF30 frame; use in combination with the standard bottom bracket for your chosen frame.

FSA Standard Headset Bearings

If your plan is to install a 386EVO crank into a PF30A or BB30A Cannondale frame, look no further. This adapter from FSA is just what you need.

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

FSA (Full Speed Ahead) Chainring Bolts

- Super light (SL) headset bearings - 1.5" ACB 36 x 45 bearing - Sold individually - Fits Orbit ZS - Vendor #: 160-1656

- BB30 Bearing, Pair, 230-5026 - 30x42x7mm

Upgrade your standard SRAM rear derailleur with our 12T+16T set coupled with Garbaruk RD cage for SRAM derailleurs for improved shifting quality. - 7075-T651 Anodized Aluminum Alloy - 21g Compatible rear derailleurs (when equipped with Garbaruk cage): SRAM 11-speed: NX, GX, X1, X01, XX1, APEX 1, Rival 1, Force 1. SRAM 12-speed: XX1 Eagle, X01 Eagle, GX Eagle, NX Eagle, GX Eagle AXS, X01 Eagle AXS, XX1 Eagle AXS. Bolts for pulleys are not included

With Garbaruk RD cage for 11/12-speed SRAM rear derailleurs, you can squeeze much more performance out of your standard 11-speed rear derailleur. You can now use cassettes up to 50T, which provides 11-speed 1x drivetrain range close to that of 12-speed ones. All you need is to replace the cage of your standard SRAM rear derailleur with Garbaruk RD cage. By re-positioning the upper derailleur pulley closer to the small cassette cog and further away from the largest cog, we have been able to allow rear derailleurs designed to be used with 11-42T cassettes to be capable of running smoothly with 10-50T cassette. - 7075-T651 Anodized Aluminum Alloy - 42g IMPORTANT: The cage is to be used in 1x setup only with the listed compatible rear derailleurs Compatible rear derailleurs: SRAM 11-speed: NX, GX, X1, X01, XX1, APEX 1, Rival 1, Force 1. SRAM 12-speed: XX1 Eagle, X01 Eagle, GX Eagle, NX Eagle, GX Eagle AXS, X01 Eagle AXS, XX1 Eagle AXS.

Now you can use wide-range cassettes (up to 50T) with your GRX rear derailleur. Moving the upper derailleur pulley closer to the smallest cassette cog, and lower one further away from the largest cog allows your regular GRX derailleur to operate seamlessly with wide-range cassettes, like the Garbaruk 11-50T 11-speed model. - 7075-T651 Anodized Aluminum Alloy - 47g IMPORTANT: The cage is to be used in 1x setup only with the listed compatible rear derailleurs. Compatible rear derailleurs: Shimano 11-speed: RD-RX812 (GRX)

With Garbaruk RD cage for 11-speed Shimano rear derailleurs, you can squeeze much more performance out of your standard 11-speed rear mech thanks to the more efficiently positioned rear derailleur cage. You can now use cassettes up to 50T, which provides 11-speed 1x drivetrain range close to that of 12-speed ones.. By re-positioning the upper derailleur pulley closer to the small cassette cog and further away from the largest cog, we have been able to allow rear derailleurs designed to be used with 11-46T cassettes to be capable of running smoothly with 10-50T cassette. - 7075-T651 Anodized Aluminum Alloy - 48g IMPORTANT: The cage is to be used in 1x setup only with the listed compatible rear derailleurs Compatible rear derailleurs: Shimano 10-speed: Deore (M6000, 10-speed model) Shimano 11-speed: RD-M7000-11 (SLX), RD-M8000(XT), RD-M9000 (XTR) **NOTE: NOT compatible with Di2 (XT M8050, XTR M9050) rear derailleurs.**

Our new derailleur cage for Shimano 12-speed MTB derailleurs is everything you need from a derailleur cage. We've united extreme rigidity (cage is CNC-machined out of 7075-series aluminum alloy), feather-like weight (48 grams) and exciting color options. - 7075-T651 Anodized Aluminum Alloy - 48g IMPORTANT: The cage is to be used in 1x setup only with the listed compatible rear derailleurs. Compatible rear derailleurs: Shimano 12-speed: RD-M7100 (SLX), RD-M8100 (XT), RD-M9100 (XTR) SGS (long-cage version only).

Upgrade your standard 11-speed rear mech with our 11T+16T set coupled with Garbaruk RD cage for 11-speed Shimano derailleurs for improved shifting quality. - 7075-T651 Anodized Aluminum Alloy - 20g Compatible rear derailleurs (when equipped with Garbaruk Shimano 11 speed cage): SLX RD-M7000-11-GS, XTR RD-M9000, XT RD-M8000 Bolts for pulleys are not included

Upgrade your standard 12-speed rear mech with our 14T+16T set coupled with Garbaruk RD cage for 12-speed Shimano derailleurs for improved shifting quality. - 7075-T651 Anodized Aluminum Alloy - 22g Compatible rear derailleurs (when equipped with Garbaruk Shimano 12 speed cage): SLX RD-M7100-SGS, XT RD-M8100-SGS, XTR RD-M9100-SGS Bolts for pulleys are not included

With Garbaruk RD cage set for 12-speed SRAM AXS rear derailleurs, you can squeeze much more performance out of your drivetrain thanks to the combination of rear derailleur cage, oversized pulleys and extender link which allows to get more drivetrain range, smooth shifting, and more precise operation of your bike transmission. You can now use cassettes up to 52T to build up your Gravel/CX bike. By re-positioning the upper derailleur pulley closer to the small cassette cog and further away from the largest cog, we have been able to allow rear derailleurs designed to be used with 10-33T cassettes to be capable of running smoothly with 10-52T cassette. Fully compatible with Sram 12-speed AXS flattop chain. IMPORTANT: To be used in 1x setup only with the listed compatible rear derailleurs. Compatibilitty: SRAM 12sp RED AXS, SRAM 12sp FORCE AXS, 12sp Rival AXS, SRAM etap 11speed A2 rear mech, with 11/12-speed chains including Shimano HG+ and SRAM AXS flattop.

Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. - KEB-SL - linear strand, Kevlar reinforced, compressionless brake housing with Slick-Lube liner - Perfect for full-housing, high-performance bikes with mechanical disc or rim brakes - 20 black alloy lined end caps, 10 black POP end caps included

The K-EDGE Road Chain Catcher is THE Original Chain Catcher used by professional cyclists and pro teams around the world, in all types of racing including prestigious Olympic Games, World Championships, and Grand Tours, such as the Tour de France, Paris-Roubaix, and Giro d ’Italia. The K-EDGE chain catcher is a simple add-on component machined to precision which improves the overall function of your drive train and protects your valuable frame from dropped chains. - Material: 6061-T6 CNC machined Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third party braze-on adapter clamps - Made in Boise, Idaho, USA, - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with Shimano, SRAM, and KMC 11-speed chains

Missing Link DLC Chain Link - DLC coating provides high surface hardness - Non directional design for easy assembling - Compatible with KMC and SRAM 12-speed chains - Opening tool required

- Compatible with Shimano, SRAM, Campagnolo and KMC 11 speed chains - DLC Coated - Non-reusable - Opening Tool Required - Card of 2 pairs

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with Campagnolo 10-speed chains

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

Magura Caliper Cover Ring Kit

- Prevents side-to-side play in thru-spindle bottom brackets to ensure bearings do not wear out prematurely - Replaces stock plastic preload rings on bikes with SRAM 30mm spindle cranks, Race Face 30mm spindle cranks, Easton 30mm spindle cranks, and SRAM DUB 28.99 spindles - Super durable, Precision CNC Machined 7075 piece of hardware

An M6 bolt for fitting Mudhugger EVO Bolt-On to Rockshox Recon Gold & Silver 35 forks. Compatible with EVO Shorty Bolt-On and EVO (Long) Bolt-On fenders. NOTE: some Recon Gold/Silver do NOT have bolt holes; please check your forks before ordering. When fitting to your forks use the angle adjust shim provided in the default Bolt-On packaging to raise the tail end of the fender to the correct angle. Kit includes: - 1x M6 bolt, 10mm long

Designed around the DVO Onyx SC fork to allow fitting the EVO Bolt-on fenders via the 3 bolt holes in the back of the fork. Also compatible with the Sapphire and Diamond fork. Compatible with Mudhugger EVO Shorty Bolt-On and EVO (Long) Bolt-On fenders. Kit includes: - 1x DVO Adapter bracket - 2x 12mm M4 bolts - 1x 16mm M4 bolt (for centre hole) - 2x self-tapping screws

Ohlins adapter kit for fitting the EVO Bolt-on fenders to your OHLINS forks. Compatible with RXF 38 (2019+) and DH forks. Minimum Fork Offset: 44mm Compatible with Mudhugger EVO Shorty Bolt-On and EVO (Long) Bolt-On fenders. Kit includes: - 1x Ohlins adapter Bracket - 3x M4 bolts - 1x Hex key

The ZEB Adapter for fitting the EVO Bolt-On fenders to your Rock Shox ZEB fork. Minimum Fork Offset: 44mm Compatible with EVO Shorty Bolt-On and EVO (Long) Bolt-On fenders. Kit includes: - 1x ZEB adapter bracket - 3x M3 bolts - 3x M3 washers - 1x 3mm bolt sleeve

Fits: This nut is for NSB DH0135 Rocky Mountain 12 x 148 hanger. If you have a Rocky Mountain bike with the Reverse Axle you will need this nut to make our DH0135 compatible. Rocky Mountain bikes with 12mm through-axle: 2017–2021 Element Carbon 2018–2020 Element Aluminium 2017–2020 Slayer Carbon 2018–2020 Altitude Carbon and Aluminium 2018–2020 Instinct Carbon and Aluminium 2018–2019 Pipeline Carbon and Aluminium 2017–2020 Suzi Q Carbon 2018–2021 Altitude Powerplay 2018–2021 Instinct Powerplay 2019–2021 Growler Powerplay 2018–2021 Vertex Carbon 2020–2021 Reaper Features: CNC machined from 6061 T6 Aluminum Anodized pewter finish Model: NSB DH0135-N

These finely crafted cable guides are the ultimate accessory for your Marzocchi fork. Color match your cable guide to the Red and Blue adjustment dials, frame color, stem color, and pretty much anything! Offered in Black, Gold, Pewter, Red, and Blue anodized finishes. Fits 4x DJ1 44 55 66 & 888 Supplied with (1) M3 x 8 screw

Add a little color to your bike with these finely machined headset top caps. These caps are for 1 1/8? headsets and they will work on all headsets with tapered headtubes.

Add a little color to your bike with these finely machined headset top caps. These caps are for 1 1/8? headsets and they will work on all headsets with tapered headtubes.

These finely crafted cable guides are the ultimate accessory for your Fox fork! Now you can color match your cable guide to the Red and Blue adjustment dials, your frame color, your stem color, pretty much anything! Offered in Black, Gold, Pewter, Red, and Blue anodized finish. Fits: 2008–2020 Fox 32, 34, and 36 Forks 2014–2020 Fox 40 (Post mount brake) 2019–2021 Marzocchi Bomber Z1, Z2, DJ and Bomber 58 Supplied with (1) M3 x 8 screw

Fits: - Commencal Supreme 12mm Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0048

When race day comes, you want to have every advantage. Optimizing your bike for each course is key to putting yourself in the best possible position to win. With the NSB Direct Mount Stem spacers, you can quickly change your bike’s bar height. Remove the stem mounting bolts, slip a spacer under your stem, and remount with the provided screws. Available as single spacers or as our Race Pack. The Race Pack includes 3mm, 4mm, and 6mm, spacers and a set of 4 x M6 x 25mm bolts and 4 x M6 x 30mm bolts. These spacers are designed to work with mountain bike DH forks such as the Boxxer and the Fox 40. These spacers will not work with forks such as the DNM Volcano USD-8C. - One-piece stem risers - Includes hardware - Stackable for custom heights (longer hardware required for heights over 6mm) - Fits RockShox BoXXer (2009+), Fox 40, and 2012 Marzocchi 888 forks - Weight: 3mm - 8 grams

Updated for the 2021 RockShox Zeb. These finely crafted cable guides are the ultimate accessory for your fork. Fits 2021+ RockShox Zeb and Boxxer forks Supplied with (1) M3 x 10 screw

These finely crafted cable guides are the ultimate accessory for your Fox fork! Now you can color match your cable guide to the Red and Blue adjustment dials, your frame color, your stem color, pretty much anything! Offered in Black, Gold, Pewter, Red, and Blue anodized finish. Fits: - All Fox 40 Forks until 2013 (IS Brake mount) - 2002–2007 Fox 32 & 36 Forks

Fits: - Early Azonic B-52 (NOT 2011 frames) - Intense frames and 2009 Uzi - Some KHS models Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0043

Fits: - Banshee & Mythic 10mm rear axle bikes - Rune, Wildcard, Viento, Pyre, Rampant, Spitfire - KHS bikes Features: - CNC machined from 6061 T6 Aluminum - Anodized finish - Model: NSB DH0009

Fits: - Banshee Legend MK2 *** Not the same as 460-056 (NSB DH0049) Banshee Scythe *** Features: - CNC machined from 6061 T6 Aluminum - Anodized finish - Model: NSB DH0072

Fits: - Banshee Scythe - Banshee Legend MK1 *** Not the same as 460-057 (NSB DH0072) Banshee Legend MK2 *** Features: - CNC machined from 6061 T6 Aluminum - Anodized finish - Model: NSB DH0049

Fits: - Brodie road bikes (most current models) - Kona Bikes - Lapierre Alloy Cross Bikes - Kona Type AA Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0032

Fits: - 2019, 2020 Brodie Tiber gravel bike Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0162

Fits: - Cervelo S1, S2, S3 2009 - 2010 - Cervelo R3SL, R3, RS 2009 - 2010 - One 2003 - 2004 - Dual 2003 - 2005 - Soloist Team 2004 - 2006 - Soloist Carbon 2006 - Soloist Carbon SL 2006 - R2.5 2003 - 2005 - R3 2006 Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0037

Fits: - Cove bikes Stiffee, G-Spot, Hustler and Foreplay Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0034

Fits Older Cove Bike models Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0020

Fits: - Most Devinci bike models up to 2011 - Will not fit some earlier bikes ie. 2005 Guzzler, 2009 Hectic Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0027

Fits: - Ellsworth Truth - Ellsworth Moment - Ellsworth Epiphany - Ellsworth Evolve Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0053

Fits: - Giant Bikes (older models) - Kona Bikes Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0007

Fits Giant Glory 2007, 2008, 2009 Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0019

Fits: - Most Giant Road Bikes, TCR, TCR Advanced, OCR Composite, - Rapid, Rapid Composite, Defy, Avail Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0079

Fits: - AnyRoad (2014 - 2016) - AnyRoad CoMax (2017) - Defy, Defy Advanced, Defy Advanced SL (2012 - 2016) - Defy Advanced Pro (2015 - 2016) - Escape RX Composite (2014 - 2016) - Escape (2015 - 2016) - Fastroad (2015) - Frais (2012) - Invite (2014 - 2016) - Invite Comax (2015 - 2016) - Propel (2014+) - Propel Advanced (2014 - 2016) - Propel SLR (2016+) - Revolt (2014+) - TCR Advanced, TCR Advanced SL (2012 - 2015) - TCX Advanced SL (2014) - TCX SLR (2014 2016) - TCR Advanced Pro (2015) - TCX Advanced (2014 - 2015) - TCX Advanced PRO (2015) - Alight (2015 - 2016) - Avail (2012+) - Avail Advanced (2012 - 2016) - Avail Advanced Pro (2015 - 2016) - Avail Advanced SL (2012 - 2016) - Avail Aluminum (2012 - 2016) - Avail C (2013- 2014) - Avail SL Disc (2017+) - Beliv (2016+) - Brava (2014 - 2016) - Envie (2014 - 2016) - Enviliv Adv (2019) - Enviliv Adv Pro (2019) - Thrive (2015 - 2018) - Thrive Disc (2018) Giant Part #1159-RE171A-003 CNC machined from 6061 T6 Aluminum Model: NSB D0171 ***Fastener not included***

Fits: - Haro full suspension bikes (Xeon & Extreme) - Jamis most bikes (Dakota, Durango, Parker, Dakar) - Kinesis MTB frames - Kona bikes - Diamondback bikes - Bianchi Oetzi Carbon, Oetzi Alu Disk, Oetzi V-Brake, - Bianchi Mutt Alu, Doss Alu, Dirt Alu, - Ducati Corse Scrambler XR, XS, Ducati Corse Panigale - GT bikes - Raleigh bikes Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0033

Fits: - Various bike models with 10mm rear axles. - 10mm rear axle Intense bike models (Tracer and Spider) - Ibis Mojo and Mojo SL Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0025