Paul Component Engineering Paul Road Single Speed cranks 165MM/39T/Black/Circles

Pauls's Road Cranks take advantage of the narrower chainstays found on road frames, and the 44mm chainline of our High Flange hubs.

These cranks use a specially designed interlocking chain ring/crank interface. Four 7075 Aluminum chain ring bolts with T25 Torx heads bolt through the chain ring and into the reinforced spider on the crank arm.

The crank arms are machined from 2024 aluminum, a very strong and stiff material. They are given a high polish finish and optional black anodize. The crank arms are available in two lengths: 165mm and 170mm.

The chain rings are machined out of 6.3mm thick aluminum plate; very sturdy. Wider teeth designed only to work with 1/8” chains which prolongs their life span. Replacement chain rings are available.

Chain rings are available in two different patterns and four different sizes. 39, 44, 46 and 48 tooth rings are available in our Circles pattern. Additionally, 46 and 48 tooth rings are available in the Suit of Cards design.