Write a Review

Built for high-alpine terrain, the Rime 2.0 brings rugged capability to ensure you can conquer any mountain trail. XPEL mesh lining sheds while you shred, preventing the shoe from becoming water-logged in creek crossings and will dry overnight. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating superb/unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with an L6 Boa for a precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6-Snap dials for easy adjustment, backed by the Boa Lifetime Guarantee - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram rubber sole for confident traction - Relaxed Fit for a balance of pedal feel and off-bike comfort - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 384g (1/2 pair, size 42)

With exceptional warmth and waterproofing for the coldest and wettest conditions, a heat-reflecting insole, and a QuickLace system that's housed under the outer shroud, your coldest days on the road are soon to be your favorite. The all-new Blaze is our core winter cycling shoe, featuring modern technical materials and design to reduce bulk while delivering exceptional warmth and weatherproofing for conditions down to -10° C /14° F. The heart of the Blaze is an internal, moisture-wicking mountain bike shoe that's fully insulated with a channeled, high-loft Primaloft synthetic sheath featuring 10,000 W/P + 10,000 GM2 wind- and waterproof performance plus a heat-reflecting insole and protective reinforcement in key wear zones. The result is a breakthrough in warm, dry comfort with purpose-driven details that inspire confidence to pedal through the toughest winter riding conditions. Specs: - Upper Construction: Stretch woven face fabric with 10,000 w/p + 10,000 GM2; film channeled, high-loft fleece interior plus elastic outer collar Primaloft synthetic insulation; Fully seam-sealed stitching; Breathable, moisture-wicking mesh upper inner shoe; Thermobonded rubber toe and heel reinforcements; Integrated ankle padding; Reflective detail at heel and side profile - Reflectivity: Reflective detail at heel and side profile - Footbed: Heat-reflective insole with high loft fleece and laminated foil - Outsole: Nylon-composite plate; Dual-injected "Ice grip" soft rubber outsole; Stainless steel hardware - Weight: 385g (Size 42)

These replacement walking pads are easy to install, and bring your shoes back to original spec, so you can keep on movin'. These replacement walking and heel pads integrate with the Republic LX, Republic, Civila, Territory and Reveille shoes, and the kit comes with full left and right replacement pads and includes hardware.

The 2FO DH Flat is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot ST rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Leather and textile upper with added protection keeps you comfortable and is built to last. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Approximate weight: 395.9 grams

The Stylus features our premium Synchwire single-layer upper that conforms to the foot and provides phenomenal structural support and ventilation. Three compression-molded Velcro straps provide tried and true tightening to create a comfortable, supportive fit. Our injection-molded nylon and glass fiber outsole, with over-molded heel and toe pads plus a universal 3/2 cleat bolt pattern that give you the power and versatility you need to get the most out of every ride. Upper: - Synchwire one-piece composite upper - Laser-cut venting - Three compression-molded Velcro straps - Reflective rear tab logos and graphics Outsole: - Injection-molded nylon and glass fiber outsole - Universal cleat mount (2- or 3-bolt) - Over-molded TPU toe and heel pads Footbed: - Die-cut EVA insole Weight: - 272 grams (size 42)

45NRTH Wölvhammer BOA® winter bike boots make year-round riding possible, with high-tech design and materials that stand up to snow and ice. Get yours here. Most winter boots aren't made for riding bikes — they're too warm in some spots or not warm enough in others, and they're not optimized for pedaling. Wölvhammer BOA® boots are the answer for winter riders. Designed and built for the rigors of real winter riding (deep snow, slippery ice, cold pedals), These winter bike boots are rated for comfort from 0º to 25ºF (-18º to -4ºC), slotting between our Ragnarök and Wølfgar boots. Take on winter rides with Wölvhammer. - Rated for 0º to 25º F / -18º to -4º C comfort - The BOA® Fit System delivers micro-adjustable, precision fit engineered to perform in the toughest conditions - Hook-and-loop upper strap helps secure boot - Removable synthetic liner boot for quick drying - Waterproof breathable membrane to manage moisture - 200 g of Primaloft® insulation - Aerogel insulation underfoot blocks the chill from snow, ice, and cold pedals, and allows for insoles without sacrificing warmth - Non-slip sole for walking on icy surfaces - Compatible with flat and clipless pedals

Take charge of the road with full-featured performance and comfort. To make a full-featured shoe that can handle extended miles and hard roads, we started with an ultralight monofilament mesh Synchwire upper that fits and feels like a second skin, then added thermal-welded TPU for structural support and resistance to grit and grime. Fast, intuitive fit adjustment is guaranteed with dual Boa L6 buckles, steel laces, and soft lace guides that allow you to get a precise fit with even pressure distribution to ensure comfort with every turn of the pedals. And finally, the advanced carbon composite plate ensures efficient power transfer and responsive feel at the pedals, while allowing 5mm of adjustment for optimal cleat positioning. Upper construction: - One-piece Synchwire upper with thermo-bonded exo-structure - Laser-perforated ventilation throughout - Dual Boa L6 dials featuring 1mm adjustment and macro release, with steel lace and soft lace guides - Reflective heel tab Footbed: - 3D-molded footbed with medium arch support Outsole: - Carbon-composite 3-bolt plate - Dual-injected TZU walking pads - Stainless steel hardware with 5mm fore/aft adjustment Product weight: - 265 grams (Size 42)

Mountain: Biker, Climber, Guide, Explorer. For those who ride and hike, hike and ride, or simply find themselves going off trail, we created the Rime Flat. An approach shoe for the dedicated trail rider designed to have just as much performance when hiking as it does when riding. The proprietary SlipNot SuperTacky rubber sole was developed to strike a perfect balance of pedal grip and trail kick. To aid in climbing steep and loose trails, we've built in a flexible toe section that makes it easier to kick into the terrain, giving you a leg up when you hike up. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency; optimize hip, knee, and foot alignment; and reduce injury risks. - Welded mesh and TPU upper eliminates seams and is engineered for durability. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Approximate weight: 386.5 grams

The Ranger is an XC-style shoe offering the same supportive fit and rugged durability found in our premium shoes. It features a stout nylon and rubber co-molded outsole for efficient pedaling with impressive durability, grip, and traction in rocks and mud. The upper combines supple synthetic fiber with mesh panels for increased breathability, fast dry times and light weight. Three wide straps allow easy fit adjustments, and a supportive EVA footbed enhances comfort whether you're chasing your personal best or simply out to enjoy the trail with friends. Upper construction: - Classic 3-strap closure - One-piece Synchwire upper with thermo-bonded exo-structure - Rubber reinforced heel and toe sections - Reflective heel tab Footbed: - Die-cut EVA footbed with medium arch support Outsole: - Nylon-composite 2-bolt plate with dual-injected rubber outsole - Stainless steel hardware Product weight: - 315 grams (Size 42)

Just because winning an XC World Cup isn't on your to-do list, doesn't mean you don't value performance and comfort. Recon 2.0 is your shoe. Inspired by S-Works Recon, with Body Geometry comfort and efficiency, Recon 2.0 puts all that performance within easy reach. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. We've also lifted the heel for an even more natural feeling while walking. To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. If the traction's needed in the wet, you can also rest easy knowing the XPEL mesh used through the Recon 2.0 won't get bogged down with water and will dry exceptionally quickly. No more wet shoes the morning after a wet ride. An L6-Snap Boa and a Velcro forefoot closure ensure micro-adjustable comfort with a secure fit designed for all-day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0 - Welded upper reduces seams for superior step-in comfort. - BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 357g (1/2 pair, Size 42)

Progressive Performance Clipless Trail Shoe - Highly durable upper fabrics with perforated panels for enhanced ventilation - Low absorbency quick-dry lining - EGM footbed maximizes comfort and power transfer - StickyFoot Grip pedal contact areas provide great connection with caged and clipless pedals - Toe and heel sections deploy StickyFoot Dura in an aggressive tread pattern to provide superb walking grip and durability. - Offset cleat box with increased longitudinal adjustment provides a wide range of stance option for caged or traditional clipless pedals - Flex profile balances stiffness and flex for power transfer and control - Traditional laces and additional Velcro strap lock your feet in place - Sharkskin fabric lined heel cup helps hold foot in place - Reinforced toe and heel box offer protection from flying trail debris

HIGH PERFORMANCE TRAIL-CONQUEROR All new Flume combines advanced off-road footwear technology with bike-specific performance to offer a trail flat shoe that's designed to outlast the biggest epics. The Cordura upper is breathable and lightweight, but also trail-tough and protective with a stitch-free and fully welded construction. The new adaptable outsole has a supportive pedal contact area featuring our MAX GRIP rubber for a confident connection with the pedal when charging the trail ahead. Compliant reverse hex traction in the toe and heel make easier work when hiking becomes necessary. Features: - MAX GRIP rubber outsole - Hexagon outsole featuring reverse hex traction pattern on toe and heel for hike-able climbs and descents - EVA midsole provides support and shock absorption - D3O High Impact Zone Technology insole absorbs impact and reduces fatigue - Lightweight bonded upper featuring Cordura mesh for durability and breathability - Anti-bacterial mesh lining controls odor - Fully gusseted tongue prohibits intake of dirt and debris - Elastic lace tuck to keep laces secure - TPU mud guard to protect against dirt, debris and rubbing - TPU toe and heel protection with reinforced anti-abrasion film - Heel pull tab for easy entry

Giro took a classic trail shoe and made it even better. The Manta R features a new nylon and rubber co-molded outsole for exceptional durability and improved grip on rocks or roots. The reinforced toe box boasts a rubber toe-guard for improved durability, yet comfort reigns supreme with a supple microfiber upper, two straps, and a micro-ratcheting buckle. Those features, combined with the stiff and efficient nylon outsole, create a shoe that rivals the performance of more expensive composite designs. Other highlights include aggressive lugs for improved traction, toe spike compatibility, and a supportive EVA footbed with Aegis anti-microbial treatment.

Great for riding on the course or off the beaten track, the Sector mountain bike shoe is ready to power up for adventures. Race-ready. Adventure inspired. The Sector combines a supple, breathable Synchwire upper with a stout carbon-composite plate and an aggressive, dual-injected rubber outsole for excellent traction that won't de-laminate or break down. A supportive 3D molded footbed with Aegis anti-microbial treatment enhances comfort and fit, which is adjustable via dual BOA L6 dials featuring 1mm adjustment and macro release. It's a great choice for riders looking for inspired performance that's capable on the course or off the beaten track. - One-piece Synchwire upper with thermo-bonded exo-structure - Reinforced heel and toe sections - Dual Boa L6 dial featuring 1mm adjustment and macro release, with steel lace and soft lace guides - 3D molded footbed with medium arch support - Carbon-composite 2-bolt plate with dual-injected rubber outsole - Stainless steel hardware - 342 grams (size 42)

The all-new S-Works Torch Lace delivers the timeless, refined style of a lace-up with an unprecedented level of efficiency, lightweight, and comfort thanks to Body Geometry. It all adds up to a shoe that disappears on your foot, yet begs to be seen. Like every shoe we make, the S-Works Torch Lace starts with Body Geometry - identify a problem, solve it with design, and validate it with science - to improve comfort, increase performance, and reduce the chance of injury for every rider. Comfort: The S-Works Torch Lace utilizes our new forefoot shape - 4mm wider than the S-Works 7 - based on extensive 3D foot scans and Retül data. The upper features remapped zonal layering throughout. It remains incredibly supple to adapt to different foot shapes, yet won’t stretch over a long day in the saddle to ensure a secure, consistent fit. An asymmetric heel counter reduces hard touch points against the ankle and still delivers knee stability validated by our Human Performance team. Efficiency: Every Body Geometry shoe optimizes ankle, knee, and hip alignment for a stable and pedal stroke with our patented Varus Wedge, a 1.5mm outward tilt to the outsole. Thanks to the lightweight retention of laces and watching every gram - from the carbon outsole to the upper material - the S-Works Torch Lace weighs a feathery 200 grams in size 42. With an internal ‘I-Beam’ the carbon outsole provides the ideal stiffness-to-weight ratio for big efforts without adding excess grams, optimized by working with the best riders in the world. Style: Beauty is in the eye of the beholder, and those that see the S-Works Torch Lace will get to admire them as long as they can hang on your wheel. With classic lines and understated colorways the S-Works Torch Lace is at home whether you chase finish lines or mountain tops before sunset. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Laced closure maintains the most opportunity to customize fit along the entire foot. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - Approximate weight: 200g (1/2 pair, Size 42).

If you're on the hunt for a capable, tough, and versatile pair of mountain biking shoes, look no further than the Rime 1.0. They feature a host of Body Geometry hallmarks that you'll find in all of our shoes, plus sweet tech like an X-PEL water management system that reduces water absorption while drastically improving dry time. And, to round out the package, we included a SlipNot Rubber outsole, a Lollipop midsole, and a relaxed fit that balances pedal feel and off-the-bike comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - X-PEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Laces and Hook-and-loop overstrap provide a comfortable with one-hand adjustability - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - SlipNot rubber sole for confident traction. - Cushioned EVA foam midsole for comfort with molded heel cup for stability. - Relaxed Fit for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals.

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

To make a full-featured shoe that rivals minimalist designs in weight, we created the imperial road shoe, which features our own ultralight monofilament Synchwire mesh upper that fits and feels like a second skin. The Imperial's Synchwire upper features Boa IP1 dials and soft lace guides, which allow you to adjust your fit on the fly while reaping the benefits of the shoes light weight. Thermal-welded Teijin TPU adds structural support exactly where it's needed, and a high-modulus Easton EC90 SLX2 carbon fiber plate provides ultimate stiffness-to-weight for power transfer. Our adjustable Super Natural Fit footbed system is the final touch, allowing you to customize arch support right out of the box for luxurious comfort and optimal pedaling efficiency. - One-piece Synchwire upper design with soft lace guides - Teijin welded SL monofilament mesh - Twin Boa IP1 dials featuring 1mm +/- micro adjustment and incremental release - Easton EC90 SLX2 high-modulus carbon - Stainless steel hardware - Replaceable heel pads - Supernatural fit kit with adjustable arch support - XT2 anti-microbial fiber top sheet - 215 grams (size 42.5)

Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.

The Rincon combines a supple, breathable Synchwire upper with a robust nylon-composite plate and an aggressive, dual-injected rubber outsole for excellent traction that won't de-laminate or break down. A supportive 3D-molded footbed enhances comfort and fit, which is adjustable via a single BOA L6 dial featuring 1mm adjustment and an adjustable forefoot strap. It's a great choice for riders looking for reliable performance with outstanding value in off-road footwear. Upper construction: - One-piece Synchwire upper with thermo-bonded exo-structure - Rubber reinforced heel and toe sections - Boa L6 dial featuring 1mm adjustment and macro release, with steel lace and soft lace guides - Reflective heel tab Footbed: - Die-cut EVA footbed with medium arch support Outsole: - Nylon-composite 2-bolt plate with dual-injected rubber outsole - Stainless steel hardware Product weight - 320 grams (size 39)

Allows simple, removable, in-shoe adjustment to the forefoot varus/valgus angle for optimum foot, knee, and hip alignment. - Reversible shims work for right or left application - Vented for comfort - Package includes two varus shims (orange) or two valgus shims (yellow), based on selection

The Tracker fits the need for a cycling/e-bike friendly flat pedal shoe that's light, comfortable and breathable enough for all-day adventures, yet doesn't sacrifice grip or performance when you need it. Built on our new last, placing the foot closer to the pedal and featuring a flat profile for optimal pedal contact, the Tracker has direct lineage to the performance of our more aggressive flat pedal models without any excess bulk. The Tack Rubber outsole engages flat pedal pins with confidence and a dual-layer EVA midsole provides comfort for off-the-bike hikes. A single, tongue mounted BOA L6 dial makes for quick on/off and micro-adjustment for a supportive fit.

The Deed's combination of ride-enhancing features ensure you feel right at home on single track, pump tracks, and all the tracks in between. The upper is constructed with highly abrasion-resistant textile side panels and protective microfiber on the toe for enhanced coverage and durability where it counts. The fit is engineered for a close connection to the pedal and the combination of a highly elastic Tack Rubber outsole plus an internal layer of Mute Foam provides exceptional grip, while also damping chatter to keep you planted on the pedals when the terrain gets rough.

Technical Trail performance Trainer Styling - Highly durable upper fabrics with perforated panels for enhanced ventilation - Low absorbency quick-dry lining - EGM footbed maximizes comfort and power transfer - StickyFoot Grip contact areas provide great connection with pedals - Toe and heel sections deploy StickyFoot Dura in an aggressive tread pattern to provide superb walking grip and durability. - Flex profile balances stiffness and flex for power transfer and control - Traditional laces and additional Velcro strap lock your feet in place - Tongue gaiter help keeps mud and dirt out - Sharkskin fabric lined heel cup helps hold foot in place - Reinforced toe and heel box offer protection from flying trail debris

With pedal power, a sticky rubber outsole, and an easy Boa and forefoot strap closure system, you can head out wherever the trail takes you in the Ventana Mountain Bike Shoe. This shoe is built around a stout nylon shank proven on the DH World Cup circuit to power the pedals efficiently and combined with an injected EVA cushioning midsole plus our exclusive Sensor rubber outsole that inspires confidence when scrambling over rocks and logs. The fit is secure and supportive thanks to a Boa micro-adjustable buckle and forefoot strap closure, while a reinforced heel and toe box offer protection from scrapes and impacts. - One-piece Synchwire upper design with PU bonded mesh - Rubber reinforced heel and toe sections - Boa l6 dial featuring 1 mm adjustment and macro release, with steel lace and soft lace guides - Velcro forefoot strap - Injected EVA cushioning midsole - Sensor rubber compound engineered for durability and grip - Stainless steel hardware - Molded EVA footbed with medium arch support - 417 grams (size 42.5)

The 2FO DH Clip is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot FG rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Cushioned EVA foam midsole for comfort. - Extended length cleat slot (4mm) for rearward cleat set up option. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Synthetic leather upper with added protection keeps you comfortable and is built to last. - Two-bolt cleat pattern fits all major mountain pedals. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.

The Chamber II shoe holds fast to the legacy of Giro's original EWS and DH World Cup-winning Chamber shoe—secure fit, a durable water-resistant reinforced microfiber upper and a full Vibram Megagrip rubber outsole—and steps up to a new level with a 10mm cleat setback. More setback allows you to position the pedals further back under the arch of the foot to reduce fatigue and enhance positioning for technical terrain. The internal shank also has been updated with a Tri-Mold construction that optimizes stiffness and flex for each zone of the foot. The result is a new level of performance that’s better from top to bottom, with the right amount of flex for uphill pushing, incredible pedaling efficiency, and a better connection to the pedals.

From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price. In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa S2-SV Snap dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit. - Standard Fit for support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 248g (1/2 pair, Size 42)

Windy descent. Sudden downpour. Cold, high-elevation climb. Whatever the ride throws your way, our Neoprene Tall Shoe Covers keep feet comfortably pedaling onward. Stretchy high-cut neoprene and fully taped seams keep feet dry and protected in wet and windy conditions. Gravel or road ride, the universal cleat opening accommodates your preferred shoe type. For added durability, abrasion-resistant panels are strategically placed in high-wear areas to ensure these overshoes hold up year after year. - Fully taped seams prevent water intrusion to keep you dry and protected in wet conditions. - Zipperless construction for a comfortable fit around your ankles. - Abrasion-resistant toe and heel sole with universal welted hook-and-loop closure, so covers are compatible with both road and mountain shoes. - Fabric Content: 100% Polyester

Your road shoes weren't made for walking, but that's just what you did. We can't blame you, though, especially when installing a Replacement Road shoe Heel Lug is so darn easy. Just install these on your S-Works Road shoes (2012 and earlier), and feel the tread under your feet again. - Replacement tread for S-Works 6 and Sub6 - Heel Lugs Only - Sold in pairs; with screws