Parts

Versatile multi-function hybrid pedal with a clipless interface on one side and a conventional flat pedal on the other. - Barrel polished aluminum body with an ED black (Electrodeposition) cage and CNC machined Chromoly axle - Single release cleats with 4deg float included (as per Shimano SH51) - Clipless interface 100% compatible with Shimano SPD cleats - Adjustable spring tension for fine tuning clipless entry/release (80~140kgf/cm ) - Reflectors included (removable) - 460g per pair - 9/16 axle - Dimensions: 103 x 63mm

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Clean up your control center with Avid's Matchmaker clamp. It combines the mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can drop some grams and keep your bar nice and tidy.

Bolt on Avid's Shorty Ultimate Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

Avid takes entry level to a whole new level with the BB5s, which feature ball bearings (where the BB comes from in the name), a melt-forged body and a CleanSweep rotor for excellent stopping power and awesome durability. Plus, an inboard pad adjustment knob lets you dial in the perfect distance between the rotor and the pads, while Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds. And, the tool-free pad replacement and adjustment makes quick work out of accommodating for pad wear, so you always have positive, powerful braking.

The power starts here. With a unique design that helps keep dirt and grime from mucking up your ride, Avid's CleanSweep rotors provide the power you need in the lightweight package you want.

Perfect for your road, touring or cross bike, Avid's BB5 Road brakes have all the power you need. Used with your road-style levers, they sport precision actuation as well as tool-free pad replacement. Plus, Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds for powerful braking with positive modulation in any condition.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote for maximum convenience and ease of use.

Speeds: 11 & Box 7 DH Material: Heat Treated Alloy Steel # of Links: 116 Inner Plate: Solid Outer Plate: Solid Pin: Hollow Finish: Nickel Compatibility: Box Components / Shimano Weight: 243 grams / 8.57 ounces

BSD Seatposts

Levelled BMX Stem - Solid bolts

The Stacked stem features a taller 6061-T6 construction. - CNC machined logo

We never just want to make something, that´s already there. We want to make something different, something better. Featuring a classy and costly CNC-Finish and a wonderful Titanium bolt, Squeezy is not just light with 7.9g @ 34.9/35mm. Unlike other seat clamps, Squeezy has a collar-less design. Collars are basically just a installation aid, to prevent the clamp from sliding down the seat tube, but in fact they locally stiffen up the clamp and hinder it from distributing the clamping force evenly. Squeezy acts like a thin metal band, that perfectly snuggles around the circumference of your seat tube and smoothly secures your seatpost in place. Compact design and the Titanium Torx T-25 bolt placed as close to the seat tube as possible allow even distribution of loads and dropper posts in particular can benefit greatly from smooth load distribution. 3 "Slip-Stopps" prevent Squeezy sliding down the seat tube during installation. Squeezy is available in various diameters to fit the most common seat-tubes. Please note, that this dimension refers to the seat-tube outer diameter and NOT to the seatpost specification. - 31.8mm - 34.9/35mm Features - extremely low weight: 7g (31.8mm) - material: Al-7075-T6, fine-feed CNC finish - collar-less design for more even clamping force distribution - Ti-6Al-4V titanium-clamping bolts Torx T-25 drive (please note, that Squeezies from first batch had T-20 bolts, but we figured, that was not a very smart choice) - "Slip-Stopp" installation aids

Squeezy—not just another seat clamp. We never just want to make something, that´s already there. We want to make something different, something better. Unlike other seat clamps, Sqeezy has a collar-less design. Collars are basically just a installation aid, to prevent the clamp from sliding down the seattube, but in fact they locally stiffen up the clamp and hinder it from distributing the clamping force evenly. Squeezy acts like a thin metal band, that perfectly snuggles around the circumference of your seattube and smoothly secures your seatpost in place. - Material: AL7075-T6, fine-feed CNC finish - Titanium T-25 clamping bolt - Collar-less design for more even clamping force distribution - Three Slip-Stopp installation aids - Only 8g !

Save some weight and upgrade your Barkeeper stem. - Titanium bolts, x4 pcs

Shifty is a small but extremely effective little device for your SRAM 1x11 or 1x12 rear derailleur. Particularly when riding in wet and muddy conditions, we found out, that SRAM rear derailleurs lack shifting accuracy, due to the fact that the original pulley rotates with its plastic body on a steel axle. The pulley experiences extensive friction, when dirt, water or mud come into play and causes lack of precision or even "ghost-shifting", because the rear derailleur is not able to react smoothly to the trigger´s action, since the shifting cable can not move freely. BikeYoke Shifty features an anodized 6061-T6 aluminum body, which encloses a stainless steel bearing for ultra low friction, even when playing in the dirt. Weight of Shifty pulley: 6.3g Every Shifty now comes with a bolt and axle kit, which allows installation of our Shifty on the popular GX Eagle and NX Eagle rear derailleurs, which normally use a riveted connection, instead of the bolt-on solution of the higher spec derailleurs. You just need to remove the original rivet and replace them with our bolt and axle. Shifty fits following rear derailleurs: - XX1 - XX1 Eagle - X01 - X01 Eagle - X01 DH - X1 - GX1 - GX Eagle* - EX1 - NX* - NX Eagle* For rear derailleurs marked with *, you will need to remove the original rivet and replace it with the bolt and axle from the BikeYoke Shifty kit. 1 Set Shifty includes: - 1x Shifty pulley - 6061-T6 aluminium, anodized - 1x axle - 1x bolt

Many dropper posts feature remotes, that do not live up to a standard, that you would expect, when paying a lot of money for a dropper post. Even the most expensive droppers out there often come with remotes, that have ridiculous play, are made from plastic, bulky, heavy, or just do not function as they could. We put a lot of time and testing into the design of a remote lever that fulfils everything we want to see in a remote for dropper posts and since its introduction it has proven to be a favourite of many pro-riders and testers. Features: - Super lightweight (24g without clamp) - Made from 6061-T6 aluminium with a CNC finish, black anodized and laser engraved - You can (but don´t have to) bolt it directly to the most common brakes without an extra clamp - Exceptional finish and touch - Individual mounting points to adjust position - Integrated cable tensioner - 12.5 mm of maximum cable pull 1 set Triggy includes: - Remote lever unit (black anodized and laser engraved aluminum body and lever with cable tension adjuster) - Shift cable - Shift cable endcap - 1x "Splits" clamp or I-Spec adapter (optional)

Choose our 2X remote for your dropper if you don't have enough space for a Triggy under your left side handle bar, for example if you are still running 2-by or 3-by shifting with front derailleur or if you have anoter remote for suspension or e-support. It also features a hinged clamp, that allows snapping your remote onto your handlebars without having to take off grips or brake levers. The clamp is made from a high-tech plastic compound and aluminium. The paddle itself is made from 6061-T6 aluminum, black anodized and finished with a dark anodized BikeYoke logo. Allowing a maximum of 10mm cable pull our 2X is compatible with any known dropper post on the market. The cable/wire is clamped via screw on the lever itself.

Triggy Alpha - The name speaks for itself - the new pack leader of dropper remotes. Since the beginning our Triggy has proven to be a favourite among many many pro riders and testers but with Triggy Alpha we have now set the bar even higher and we confidently say: There is no better remote on the market. The video is pretty much explaining very well what makes Triggy Alpha stand out amongst others: - Ball bearing on the paddle - Angle-adjustable paddle - Black anodized aluminum body and paddle with laser engraved finish - 2 available paddle lengths for crisp or soft dropper engagement - 2 mounting holes - Integrated cable tensioner - Direct mount for almost any brake available (see mounting options) - New cable clamping for universal dropper compatibility - Extremely low weight: 32g/34g (short/long) - Maximum cable pull: 11 mm The short version mimics our proven original Triggy paddle geometry. The long variant features a 7mm longer paddle and reduces the required forces by about 15%. Triggy Alpha is compatible with any commonly available aftermarket cable-actuated dropper post on the market. 1 set Triggy Alpha includes: - 1x Triggy Alpha remote (short or long) - 1x shift cable - 1x wire endcap - 1x BikeYoke Splits Clamp or I-Spec Adapter (optional)

Take away the suspension rail design, and you get our SAGMA Lite saddle, the more traditional looking option in our line-up, featuring standard CrMo rails. At a lower pice point than our top models, the comfortable idbeads foam technology, the PU-Skin, and the carbon-reinforced extra short saddle shell still remain. - idbeads foam technology with low speed rebound properties - PU-Skin covering - Carbon reinforced shell - CroMo/Steel rails (7x7mm) - Width x length: 142mm x 242mm - 225g

- Ultralight bashring for light duty, not designed for high impact - 1/8" thick chainring is ideal for singlespeed bikes - Anodized and laser etched

Padded rubber tape with a tough, durable surface with excellent grip in all weather conditions. Includes Brooks Rubber Bar End Plugs.

Our best rubber grips for straight bars, thermoplastic rubber is fused with organic cotton for a natural look and feel. Suitable for city, MTB and touring use and adjustable for specific performance. Our best rubber grips for straight bars, thermoplastic rubber is fused with nylon textile for a nice look and comfortable feel, substituting organic cotton in the natural colour version. With aluminium clamp and branded rubber end plug, and adjustable for specific performance, these grips are suitable for city, MTB, and touring use. The dual textures embossed into the rubber mean the rider can turn the grip and adjust it to their preferred option. IDEAL FOR: - Commuting in the city - Travelling the globe - Urban cycling

- Perforated leather handlebar tape - Genuine perforated leather - Kit includes: 2 strips of light, perforated leather bar tape, 2 rubber bar end plugs and 2 adhesive cloth strips - Self Adhesive: Yes - Tape Length: 215mm

The design of Brooks Slender Cambium Grips incorporates an aluminium shell around which the bar tape is wrapped in the manner of traditional handlebar tape. The tape is made from organic cotton and rubber and is held in place by aluminium clamps.

In the Brooks tradition, these grips are made of natural leather, the same long-wearing leather used for Brooks saddle tops. Each grip is made with a stack of leather washers. These washers are held together by 3 spokes, enabling the grip to be adjusted to the desired length. The standard length of each grip is 130mm, but each grip can be shortened to the desired length independently. The grips are delivered in a box containing shorter 80mm spokes to make them even shorter. - Inner Diameter: 22.2 mm - Weight: 290g per Pair