Filter By:
CO2 Inflators
$3.99
These threaded 16-gram cartridges can be used with all Genuine Innovations inflators that have a 3/8-inch-24 thread.
$15.00
90 Degree twist style mini CO2 head used on SWAT products
- Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow.
- Flow can be controlled or stopped by threading cartridge back into head.
- Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.
$15.99
20 grams of Genuine Inovations' exclusive size CO2 cartridge. Specifically designed for your larger volume 29ers, mountain and fat bike tires.
These non-threaded CO2 cartridges work great with the Ultraflate (#G20310) and Full Metal Jacket (#G20440) inflators.
Available in a 2-pack or 6-pack!
$19.99
Refills … Get your refills here!
- Threaded
- 16 gram
- 3 pack
$20.99 - $22.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride.
Available in three sizes for varying tire volumes:
- Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure.
- 75mL: Repairs and inflates low-volume MTB tires in less than a minute.
- 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
$21.99
Profile Design's CO2 Mounting Bracket is a small, light holder that attaches to any Profile rear-mounted drink system or under any bottle cage. Once in place, the bracket provides a handy place to carry a CO2 refill cartridge for your CO2 inflator (Profile drink system, bottles, CO2 cartridges and inflators sold separately).
$23.99
MSW Windstream Inflator Head is a push on inflation system. Compatible with all 3/8" threaded compressed gas cartridges. Works with Presta and Schrader.
- Compact design for easy storage
- Alloy construction for durability and lightweight
- Press on for both Schrader and Presta valves
- Compatible with all 3/8" threaded compressed air cartridges
$25.00
Get the convenience of CO2 inflation in a super-small pump that can be carried anywhere with Specialized's Cpr02 Pump. This little inflator boasts speedy, controlled inflation with the power of compressed CO2 and uses threaded cartridges
$34.99
Lightweight and easy to use, MSW’s Jetstream adjustable inflator head works with all 3/8" threaded inflation canisters and allows you to vary the CO2 flow to avoid overfilling your tires.
- Adjustable airflow with a convenient shut-off feature
- Easily pushes onto Presta or threads onto Schrader valve tubes
- Knurled knob for reliable grip even with mittens or gloves
- Kit comes with inflator head, 38g cartridge, and foam sleeve
$34.99
A spring-loaded, push-on inflation system compatible with all 3/8-inch threaded compressed gas cartridges and works for Presta or Shrader valves.
- Press-on for both Presta and Schrader valves
- Compact, lightweight and durable
- Compatible with standard 3/8-inch threaded compressed gas cartridges
- CNC-machined AL-6061
- Kit comes with two 20-gram CO2 cartridges
$35.99
"Everyone knows that a straight line is the fastest line! That’s why Peaty's made their holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation, and creates less stress on your tubeless valves when you’re using it because you’re coming at the valve straight on rather than at a 90 degree angle.
It's as small and lightweight as possible, so it’s easy to carry in your pocket, bag or strapped to your bike.
Made from CNC’d 6061 aluminum, and with a patent-pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the o-rings to the awesome chris king anodized colors.
KEY FEATURES:
- Available in 12x Chris King colors
- Unique Patent Pending compact straight line design for maximum airflow
- Simply push down to inflate
- Contains 1x inflator head (CO2 cartridges and freeze protector sleeve sold separately)
- Presta valve compatible
$44.99
Tubeless tire plug kit plus CO2 head.
- Tire plug tool
- Tire plugs
- CO2 head
- Storage case
- Mounting bracket
- 5 year warranty
$44.99
- Available in 16g & 25g packs.
- 5 x threaded CO2 cartridges per pack, including 1 freeze protector sleeve with unique closed base design
- Packaged using recycled cardboard header cards and biodegradable bags
$45.56
- Aluminum housing
- Integrated pressure control regulator
- Dust protection cap
- Compatible with 16-gram and 24-gram threaded CO2 cartridges
- Includes replacement 16-gram cartridge, water bottle clip, and 2-point pump holder
- Presta and Schrader compatible
$46.98
The TL-Head Set pump head is a new solution from SKS for all tubeless tire inflation. It is compatible with SKS floor pumps and all others with a 5.0-5.7mm hose size. The TL-Head Set can be used both for conventional pumping and with CO2 cartridges for a simple seating of tubeless tires. It comes in a practical set containing 2 tire levers and 2 16g CO2 cartridges.
- Includes TL-Head, two 216g threaded cartridges and two tire levers
- Compatible with Presta, Schrader and Dunlop valves
$49.99
Refills … get your refills here!
- Threaded
- 25 gram
- 3-pack
$49.99
Featuring our simple, proven spring-loaded valve design the Wayside will get your tire aired back up, no muss, no fuss. It'll work with pretty much any threaded CO2 cartridge on the market and is compatible with Presta or Schrader valves.
- Thread-On Design—Hold on tight. The thread-on Presta/Schrader valve at the end of the extending flexible hose ensures that even the fiddliest of valves is held securely for inflation.
- Faster Inflation—Allows for quick inflation on a road, MTB, CX, or gravel bike.
- Anyvalve Pump Head—Works great on Presta, Schrader, and Dunlop valves. No leaking, no fuss, clean and simple.
- 3.68oz
- Lifetime warranty
$55.00
The easiest way to use CO2.
- Gauge confirms proper inflation, making it easy to adjust pressure mid-ride.
- Thumb trigger gives precise control.
- Accommodates threaded 16g and 25g cartridges.
- One 16g CO2 cartridge included.
$57.99
Everyone knows that a straight line is the fastest line! That’s why Peaty's made their holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation, and creates less stress on your tubeless valves when you’re using it because you’re coming at the valve straight on rather than at a 90 degree angle.
It's as small and lightweight as possible, so it’s easy to carry in your pocket, bag or strapped to your bike.
Made from CNC’d 6061 aluminum, and with a patent-pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the o-rings to the awesome chris king anodized colors.
Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high-quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature-resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.
KEY FEATURES
- Available in 12x Chris King colors
- Unique Patent Pending compact straightline design for maximum airflow
- Simply push down to inflate
- Unique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without gloves
- Each kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeve
$74.99
The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders.
- This Ride and Repair Kit provides everything needed to fix a punctured tire. The kit includes an eight-piece multi-tool, glueless tire patch kit, three tire levers, CO2 inflator & cartridges, and a seat bag to put it all in
- 50 cubic inch seat bag with hook-and-loop mounting straps
- Three MSW tire levers
- Eight-piece flat-pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers
- Glueless patch kit with six patches, sandpaper, instructions
- Windstream Push-On CO2 inflator head
- Two 20g CO2 cartridges
$79.99
- Lightweight, versatile cycling organizer strap quickly and securely mounts to frame or seat post
- Three labeled compartments keeps gear and tools organized and secure on the roughest trails
- Durable, high quality materials including polyester, Neoprene, and rubberized elastics for added grip
- Strap is capable of holding up to one 25g CO2 cartridge and a 29" mountain bike tube, plus a small multi tool and tire levers
- Includes Rap II 6 Multi-Tool, Twin Speed Drive, 1 Pair Power Levers, 1x 20g CO2 cartridge
- 195g
$139.99
Going for a ride but don't know what to pack? No problem, Blackburn has you covered. The new Local CO2 Ride Kit offers up what you need to get home, and extra carrying capacity to bring along anything else.
- Local Small seat bag offers extra space to pack your tube, wallet, phone, or whatever you want
- Wayside CO2 inflator with 16g cartridge
- GRID 8 Mutli-tool provides a quality tool to make sure your bike is adjusted properly for your ride
- 2x tire levers
Page 1 of 1