Filter By:
- Bells/Noise Makers (28)
- Mirrors (6)
- Reflective Items (4)
- Show More Brands
- Show Fewer Brands
Safety
$9.99
Add a little flair and extra visibility to your ride. A Saddle Charm adds character to the tail of your whip! Made of our woven handlebar tape, a sturdy thread locking loop, and highly reflective 3M trim, our Saddle Charms can be attached to the rails of your saddle, the bag loops on a Brooks England saddle, or just about anywhere on your bike or bag for a pop of added safety and fun. They may even give you a bit of extra luck.
$10.00
Innovative attachment bands fit 22.2 - 31.8mm bars
- Installs and releases in seconds without tools
- Ring sound: DING!
$10.99
Aluminum bell with ribbed lever
NOTE: 22.2mm diameter clamp. This bell will only fit smaller-diameter handlebars.
$11.99
Break or crack a Mirrycle mirror without ruining the mounting hardware? This replacement mirror is just the ticket! Replacement Mirror Holder with Mirror. Fits on The Mountain, LTD, Original, and Road Mirrycle Mirrors.
- Hardware not included
$16.60
The louder version of the Original Incredibell. The Incredibell XL is a little bigger and comes with the same pivoting dinger.
- Dome Diameter: 43mm (1.7')
- Fits handlebars with 21.7mm – 26mm (.85' – 1.03') outside diameters
$16.99
Add some flair and fun to kids' bikes with MSW Squeeze Horns.
- Fits standard 22-26mm diameter handlebars
- Approximately 3" wide
$18.00 - $22.49
Mirrycle's Incredibell Brass Duet makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Plus, its compact size lets you mount it just about anywhere on your handlebars.
- Dome Diameter: 33mm (1.3")
- Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters
$18.99
The Incredibell Clever Lever has a very pleasant double ding sound. The unique lever can be pivoted to any position so it can be easily reached by the thumb or another finger.
- Dome Diameter: 38mm (1.5")
- Fits handlebars with 21.7mm – 26mm (.86" – 1.02") outside diameters
$19.99
This lightweight, small mirror from Blackburn adheres directly to your helmet for a great rearview to make all your rides safer. It can be removed in seconds, too.
- This product is covered by blackburn’s limited lifetime warranty.
- Weight: 1.6 oz
$19.99
Little, Light, & Loud! Our Original Incredibell has been redesigned for quick and easy mounting on nearly any handlebar. The pivoting dinger can be rotated to any position.
$19.99 - $21.49
Don't let the small size fool you. The Original Incredibell is little, light and LOUD! Its diminutive dimensions and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear.
- Dome Diameter: 33mm (1.3")
- Fits handlebars with 21.7mm – 26mm (.86" – 1.02") outside diameters
$21.99 - $22.99
The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too!
- Dome Diameter: 48mm (1.9")
- Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters
$22.49
Made of solid brass, this bell’s melodic sound is full and old-fashioned. Big and brassy, the perfect accompaniment for cruisers, comfort, and town bikes.
- Dome Diameter: 51mm (2")
- Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters
$22.80
Accessorize your bike in a way that announces your presence in style. The omni-directional rotating top produces a clean, clear, loud ring.
- Fits handlebars with 22.2mm - 31.8mm (.87-inch - 1.25-inch) outside diameters
- Dome Diameter: 44mm (1.6")
$22.99
- Can be used on arm, leg, backpack, or bike
- 4-LED design for 360 visibility
- Built-in passive reflective strips
- Water resistant
- Mode: Flashing Off
- CR2032 Battery (included)
- 75 hour run time
- Sold individually
$22.99
- Elasticated Velcro strap provides many mounting possibilities
- Diffused LED light provides 360 visibility
- Built in passive reflective strips
- Water-resistant
- 2 Modes: Off Steady, On Flashing
- CR2032 Battery (Included)
- 75 Hour run time
$22.99
A steampunk statement for your handlebars. A transparent dome lets colorful gear workings of the insides of the bell be seen. The Gear Bell is even rainproof.
$24.99
The Omnibell has an adjustable band clamp. Its ingeniously designed dinger can be rotated to any position. This gives you flexibility in mounting the bell anywhere on your handlebar, making it very convenient to use either your thumb or another finger to ring the bell.
Dome Diameter: 34mm (1.34")
Fits handlebars with 22mm – 31.8mm (.87" to 1.25") outside diameters
$26.00 - $29.99
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality.
The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell.
THE LOOK
Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable.
THE SOUND
Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord.
THE MOUNT
What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all).
What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.
$26.00 - $29.99
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality.
The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell.
THE LOOK
Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable.
THE SOUND
Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord.
THE MOUNT
What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all).
What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.
$29.99
Snugs securely into the end of your flatbars for instant superhero powers. Constructed of lightweight yet durable plastic.
- Our mirrors don't weigh much but offer you a ton of visibility
- Easily mount these convenient mirrors directly on your handlebars
- 4oz
- Lifetime warranty
$29.99
With a smart universal mounting system, the multi-mirror works with many different handlebars by wedging into the ends of your bars.
- Our mirrors don't weigh much but offer you a ton of visibility
- Easily mount these convenient mirrors directly on your handlebars
- 4.8 oz
- Lifetime warranty
$29.99
The Mirrycle mounts in minutes with the wrench that is included. The mirror is a 3" round, convex glass mirror with a wide field of view. The mirror is adjustable to any viewing angle.
- Fits inside handlebars with 13.75mm – 22.5mm (.54" to .875") inside diameter
$29.99
Announce your presence with Portland Design Works' Alexander Graham Bell. Built to replace a 10mm 1 1/8 headset spacer, this bell is a classy addition to your rig without sacrificing any of your precious handlebar real estate.
- ?Polished brass bell
- Replaces a 10mm 1 1/8" headset spacer
- Quick-reflex alloy clapper
- Lifetime PDWarranty
$30.00
- High-visibility vest with wide silver reflective bands for maximum visibility
- Elasticated sides for improved fit
- Zip fastening
$34.99
Our Trail Bell announces your presence while letting you keep both hands firmly on your grips and goes silent with just the flick of a switch. Fits all handlebars from 22.2 to 31.8mm.
$39.99
E-bike compatible mirror.
Ideal for urban or leisure. The Espion Z56 mirror has a sturdy stem made from a reinforced fiberglass composite material and it can be fixed to the handlebars. This bar-end mirror has the largest mirror on the market.
- 56cm² reflective surface
- Ideal for urban or leisure use
- E-bike friendly
- Made from unbreakable ABS chrome
- Double adjustment at 360 degrees to tailor the orientation to your position
- Foldable for storage and protection of the mirror
Page 1 of 2
Next page