Brakes/Levers/Pads

- Pair of K-Type disc brake pads without fins, for one caliper - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Steel backplate for lower cost or Ti backplate for improved heat management and lower weight - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - Also compatible with XTR BR-M9100 calipers - Interchangeable with L-type finned pads (except for XTR BR-M9100)

- High performance compounds recommended for all-conditions - Steel backing

Shimano's disc rotors provide a sturdy and reliable braking surface to slow you down. The design is optimized to clear mud and dirt from the system for all-conditions braking. Continuously cooling itself, this rotor helps keep brake power consistent and improves pad life.

- Pair of L-Type brake pads with fins, for one caliper Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Longer lasting than K-Type pads - Interchangeable with K-type finless pads - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - NOT compatible with XTR BR-M9100

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

- Attachment parts for Magura OEM and braided-stainless hydraulic disc and rim brake tubing

- Pair of J-Type disc brake pads with fins, for 1 caliper - Available with resin or metallic compound - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches - Longer lasting than G-type pads - Interchangeable with F-Type and G-Type pads - Includes spring and pin

- Optimum heat dissipation - High durability - Wear indicators - 1.95mm thick - Rounded edge - UCI approved - Hub Compatibility: ISO 6B - Disc Pad Type: Metal or Resin - Material: Steel

Clean up your control center with Avid's Matchmaker clamp. It combines the mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can drop some grams and keep your bar nice and tidy.

- High quality, durable stainless steel machined braking surface ensures consistent stopping power and resists corrosion - Reinforced rotor design improves stability and resists warping - Compatible with all sintered, semi-metallic, and organic/resin disc brake pad compounds

Bolt on Avid's Shorty Ultimate Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

These Kool-Stop disc brake pads are designed for use with Magura disc brakes. - The Kool-Stop semi-metallic compound is made with organic materials and small amounts of metal bound together to provide high performance braking throughout the life of the pad - Fits Magura Next MT-5 and MT-7 4-piston disc brakes

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

Shimano's SM-RT64 disc brake rotors deliver powerful and consistent braking performance in all riding conditions. SHimano's Center Lock mounting system makes installing and removing disc brake rotors quick and easy thanks to the spline mount and lock ring design. - Compatible with both resin and metal pads - Includes external type rotor lockring

6-Bolt disc brake rotor - Easy to install anti-loosen plates help secure disc brake rotor bolts in place - Resin/Metal pad compatible - Size: 160, 180, 203, 220mm

Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

PR1400 OXiC Disc Brake Pads - Brake pad inserts are made by Swiss Stop

PR1400 OXiC Disc Brake Pads - Brake pad inserts are made by Swiss Stop

- Pair of N-type disc brake pads with fins, for 1 caliper - Fits 4-piston SLX, XT and XTR calipers from 12-speed generation groups - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical downhill stretches - Longer lasting than D-type pads - Spring included Model Compatibility: Shimano BR-M9120, BR-M8120, BR-M8020, BR-M7120, BR-M820, BR-M810, BR-M640, BR-MT520

9 Series Disc Brake Pads - One piece connected back plate - Comfort compound offers greater modulation and longer wear life than the Performance compound, but less power - Pair of disc brake pads for one MT5, MT7 caliper

- Optimum heat dissipation - High durabilty - Wear indicators - 1.95mm thick - Rounded edge - UCI approved

This kit includes everything you need to set up a fresh set of brakes on your bike! Now includes the updated Cease V2 brake design. Product Specifications - Brakes: Mission Cease V2 - Lever: Mission Captive - Cable: Mission Capture - Weight: 13oz

The Shimano BL-MT200 Hydraulic Disc Brake Lever and BR-MT200 Disc Brake Caliper - Brakes are pre-bled - Hydraulic hose included - Rotor not included

- Entry level hydraulic disc brakes and levers for Flat Mount frames and forks - Perfect for flat bar road bikes, urban bikes and MTBs that use the Flat Mount standard - BL-MT200 3-finger levers with aluminum master cylinder, tooled reach adjust & steel lever - BR-UR300 forged aluminum front and rear-specific Flat Mount calipers - Brake pads: B01S resin - Comes pre-bled with SM-BH59 straight connection hose - Compatible only with 160mm rotors, not included

Shimano SLX RT70 Centerlock Disc Rotors - 3-layer structure with aluminum core and two stainless steel outer layers reduces rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors - Aluminum spider - Includes standard type rotor lockring - Requires external-type rotor lockring when installing onto 15/20mm axle hub - Hub/Disc Compatibility: Center-Lock Disc - Rotor Size (mm): 140 mm - Rotor Type: Two Piece - Pad Compatibility: All Pad Compounds

- XT-grade 6-bolt rotor - Stainless steel braking surface for long lasting durability - Cutouts help with mud clearing and cooling - Large forged alloy spider supports rotor surface, increasing rigidity and heat dissipation while reducing weight - Comes complete with mounting hardware

TRP’s two piece rotors offer superior heat dissipation due to the aluminium center as well as excellent stiffness to provide you with confidence in your braking. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape during braking. Upgrade the stopping power and heat dissipation by increasing the size of your rotor giving you more surface area and leverage. SPECIFICATIONS - Sizes: 140mm, 160mm, 180mm, and 203mm - Colors: Black Center - Compatible with Centerlock hubs - Does not include lock-ring

Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance. - Designed for road use - Paceline brake track offers quiet brake operation

With comfortable hoods and lightweight aluminum levers, SRAM's 500 Single Speed Brake Levers are the perfect choice for your non-geared bike. Even if you don't run gears, you can still get all the renowned ergonomic, high-level SRAM lever function.