A traditional round drop meets modern materials and the result is 3T's Rotundo LTD. It's constructed of high-modulus carbon fiber with varying wall thicknesses that results in a lightweight and strong bar that's also super stiff for sprinting and climbing. Double cable grooves provide a smooth feel when you're on the tops.
- 25.4mm bar clamp - 620mm width with 10 backsweep
Lightweight and durable alloy flat bar. - 5-degree upsweep and 9-degree backsweep for optimal riding comfort - 600mm width
Box One DH Handlebars are designed for those riders who prefer the widest possible cockpit setup. Our bars feature a thicker layup made of 100% unidirectional carbon fiber and an oversized clamp that pairs well with any of our mountain stems. A proprietary shaped profile that incorporates flat surfaces and raised shoulders enhances rigidity without sacrificing weight. Install with carbon paste and tighten stem to a maximum of 7 Nm. Use only with carbon friendly brake levers and stem.
Chromag's original all-of-the-above riding style handlebar, the Fubars OSX is made with premium 7000 series alloy. Weighing in at a race-light 310 grams, it features a low profile rise, and dialed 5° upsweep, 8° backsweep orientation.
For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards. - Shot-peened finish - 6061-T6 Aluminum - 9-deg backsweep - 720mm wide - 35mm rise
$64.99 - $76.99
Adventure handlebars from FSA are double butted, tapered, and shot-peened AL6061. - 31.8mm bar clamp diameter with 34 x 21 ergonomic oval section - 125mm drop, 80mm reach - 12° side flare
Budget-friendly mountain bars with stylish flair. - Plain gauge, tapered and shot-peened AL6061/T6 - Shot-peened for surface hardness - 15mm rise - 9° backsweep, 4° upsweep - Bar Clamp Diameter: 31.8mm - Material: Alloy - Width: 740mm
Upgrade your bike with FSA's Omega Road Handlebar. The double-butted, tapered and shot-peened aluminum construction makes this bar light and durable. It also features an ergonomic curve for comfort and a variety of hand positions. Plus, the Omega even sports a groove that makes cable routing easy.
The Gossamer Compact uses the same evolved shape as our high-end handlebars – shallow 125mm drop, short 80mm reach, optimized for the shape of current shifters. Rider comfort is further enhanced by the flattened top section, giving an easy platform to rest your hands on. The Gossamer Compact uses 6066 aluminum, which is double butted and tapered to put strength where it's needed and trim weight where it's not. Shot peening improves fatigue resistance, and an extra-wide bulge section in the center of the bar leaves ample room for accessories. - Double butted, tapered, and shot-peened AL6066 - 34mm ergo flat top - 110mm-wide round center section makes it easy to mount accessories - Bar width: center/center from the handlebar tails
$129.99 - $146.00
FSA’s Energy compact handlebars push aluminum technology as far as it can go. High-strength 7050 aluminum tubing is manipulated to create varying wall thicknesses and diameter throughout the bar. There’s even an ergonomic flattened section on the tops, either side of the generous central bulge that gives plenty of room to mount accessories. A shallow drop and short reach are ideal for riders looking for a less aggressive riding position. The finish is sandblasted black on the taped areas for grip, and stylish polished anodizing either side of the stem. - Double butted and tapered AL7050 alloy construction - 34mm ergonomically designed flat top section - 120mm wide round center section for mounting accessories - Weight: 269g (420mm) - 125mm drop, 80mm reach
FSA's Energy Compact handlebars push aluminum technology as far as it can go. Cutting-edge manufacturing allows us to form and manipulate high-strength 7050 aluminum tubing, varying the wall thicknesses and diameter throughout the bar. There's even an ergonomic flattened section on the tops, either side of the generous central bulge that gives plenty of room to mount accessories. A shallow drop and short reach are ideal for riders looking for a less aggressive riding position. The finish is sandblasted black on the taped areas for grip, with stylish polished anodizing on either side of the stem. - Aerodynamic Integrated Cable Routing (ACR) compatible - Semi-integrated Cable Routing (SCR) compatible - Double butted and tapered AL7050 - 34mm Ergo flat top - 110mm-wide round center section makes it easy to mount accessories - Bar width: center/center from the handlebar tails - Outward Bend: 4°
FSA's K-Force Compact Road Handlebar features a racy compact design for improved ergonomics and rider comfort. Its continuous carbon/Kevlar construction is super light and impressively stiff, making it perfect for climbing and big out-of-the-saddle efforts. It also has a 110mm center section for mounting accessories and its reinforced, textured clamping areas hold tight and secure.
Take flight with the power of FSA's K-Wing Compact. This amazing handlebar features a continuous carbon/Kevlar construction for an ideal blend of stiffness, low weight and durability. The compact bend assures easy reach to your controls and a more comfortable grip when in the drops. The K-Wing also features an aero, ergonomic top section and internal cable routing to ensure your bike looks clean and clutter free.
The MX Handlebar offers a comfortable way to customize your bike with a bit of BMX style. The low-rise chromoly handlebar is a perfect upgrade to a Weekender Archer bike, for example. Or, put them on any bike in need of some tough chromed chromoly steel! - 7/8” (22.2mm) BMX style clamp (so you’ll need a BMX stem to use them) - 4” rise - 28” width
$159.99 - $174.99
These bars may look unconventional but the bottom line is that they flat out provide better handling and more comfort than a traditional bar. A wide range of better hand and body positions ensure more power, comfort and control. 45 degrees of sweep puts your wrists in a natural and relaxed position for lasting comfort. Jones H-Bars are available in three styles: Loop, Cut, Bend. The Loop H-Bar is the most full-featured of the three: it has the widest range of positions, the most mounting options for gadgets and lights, and is the stiffest. The Cut H-Bar is almost identical to a Loop, but it loses the center section of the loop, and because of this it has less room to mount your gadgets. It's also not as stiff because the two grip tubes don't connect in the center. The Bend H-Bar is an H-Bar stripped-down to its bare essentials: long, 45 degree grip areas for amazing comfort and a few very good hand positions. It's a great way to get the amazing feel of a Jones H-Bar even if you don't need the whole range of positions and mounting locations. Most material/style combinations are available in two widths: 660mm and 710mm. Both have the same basic positions and the same shape, but the 710mm version adds a fully-upright position at the back of the grip area. This is a great position to have for touring and any kind of riding where you might want to sit fully upright without needing access to the controls. The 660mm version is best for navigating very tight singletrack or narrow city/commuting situations. The 710mm is our most popular width, and has laser-etched cut guides so you can cut it down to the 660mm width.
Profile's Largo bar uses double-butted 7075 aluminum to make a lightweight handlebar that maximizes stiffness for sprinting and climbing. A wider center clamping area easily accommodates clip-on aerobars and the extended reach means there's no compromise between an aerobar or in-the-drops position. The Largo is also shot peened and anodized for added strength and durability and offers excellent comfort due to its ergonomic bends.
Profile's T2 Wing has a winged cross-section to slice through the air, making this a perfect base bar for triathlons and time trials. Made from double-butted 6061 aluminum, the T2 is super light and boasts a wide clamping section that will accept any Profile clip-on aero bar. Plus, it's shot peened and anodized for added strength and durability.
The WING/10a offers great fit versatility - allowing the rider to fine-tune the grip height for their riding style and comfort preferences. The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. For optimal aero performance, the bar should be set in the low position to increase the separation from the armrests. Aero The Wing/10a employs a truncated airfoil (Kamm Tail) to stay within UCI regulations while offering the performance of a much deeper section. This, along with tidying up the underside of the wing where the cables used to exit has led to a small improvement in performance. For optimal aero performance the bar should be set in the low position to increase the separation from the armrests. Fit Data - The WING/10a is available in the following widths: 36, 38, 40, 42, 44 - The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. The grip length can also be trimmed by up to 30mm. - The WING/10a offers the greatest fit versatility of any alloy basebar we’ve previously made, allowing the rider to fine tune for their riding style and comfort preferences. - An additional reason for the truncated design of the wing was to improve hand comfort when sitting up on the bar tops
Profile's Ozero Base Bar boasts superior aerodynamics thanks to its slippery hydroformed shape. Plus, with a center clamping section wide enough to accept any Profile Design clip-on aero bar, the Ozero puts you in an incredibly aero position. Light, stiff and fast, this bar will have you breaking your own records!
The Svet TT was designed for Time Trial and Triathlon usage and features a sleek UCI compliant 3:1 wing. Strategic cable slot positioning enables streamlined internal compatibility for electronic or mechanical shifting cable management while the zero drop and upturn brake extensions provide better positioning for climbing and cornering while in the pursuits. - Weight: 210g (42cm) - Width: 44cm (center to center) - Center Clamp Diameter: 31.8mm - Clamp Width: 140mm - (44mm) - Clip Compatible: Yes - Material: Multi-Direction, Multi-layer Carbon Fiber - Pursuit Reach: 165mm (center to tip) - Pursuit Drop: 0mm - Pursuit OD/ID: 25.4 / 19.5mm - Drop Outsweep: No
The aero wing section on Profile's full carbon Svet R Carbon Base Bar will slice through the wind quickly and smoothly. It has ergonomically shaped brake extensions for awesome comfort. Plus, with a center clamping section wide enough to accept any Profile Design clip-on aero bar, the Svet puts you in an incredibly aero position. Light, stiff and fast, this bar will have you breaking your own records!
This is an aerobar defined by fit. Unlike aerobars of the past that had their fit and adjustability range restricted by design and construction, the Aeria Ultimate places fit first. The Aeria Ultimate is a durable, low profile carbon aerobar designed with an expandable adjustability range and custom fit for the ideal TT setup for each individual rider’s body type. It features an extensive range of independent adjustment of reach and width in the smallest increments, stack adjustment with lowest stack available without extensions placed below the basebar, and built-in tilt adjustment of the integrated bracket allowing the armrests to be rotated separately from the extensions without adding stack height. - Reach adjustment range: Increments of 7.5mm with range of 92mm fore/aft - Adjustable stack of 25 to 105mm in 5mm increments to achieve the same pad stack as aerobars with extensions placed below the basebar - All dimensional adjustments are independent of each other to achieve desired fit with no need to calculate adjustments in order to make changes - Tilt adjustment is built into the pad/extension bracket with a range up to 15 degrees - rotating the armrests separate from the extensions improves overall aerodynamics without raising stack height - Includes F-40 Armrest with offset bolt pattern featuring nine times fore/aft positioning with 67.5mm adjustment range, 18,5mm width adjustment between position, and 15 degrees rotational adjustment - Stem sold separately Tech specs: - Bracket: Aeria Ultimate Forged - Stack: 25mm to 105mm (5mm Increments) - Reach: -21mm to 92mm (7.5mm Increments) - Width: 125mm to 252mm (18.5mm Increments) - Extension Length Adjustment: 230mm to 337mm (Center of Basebar to Tip) - Extension Length: 378mm - Extension Height: 71mm - Extension Angle: 30° (For T4+ Carbon) - Bracket Tilt Adjustment: 0-15° - Weight: 910g (without stem or armrest risers)
- Intended use: XC and Trail - Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform - Manufactured from UD Carbon with matte clearcoat - Requires 35mm bar clamp diameter stem - 8 degree rearward sweep, 5 degree upward sweep
DH tough and XC light, the Traverse SL 35 is our handlebar premiere, and capitalizes on our decades of carbon fiber experience to deliver precise control and exceptional comfort, along with class leading strength to weight performance. Handlebars have grown wider in recent years, and this has presented some interesting challenges. Because bars are wider, leverage stress exerted at the stem has risen dramatically. The Traverse SL features a 35mm diameter at the stem clamp; this increases strength in this crucial zone, while also dissipating the bar clamp load across a larger surface area. More secure clamping, and a stronger handlebar - these are good things. Meanwhile, our extensive experience with carbon fiber allows us to ensure maximum strength at the clamp and then tailor the carbon fiber layup to providing damping at the bar-ends, resulting in a more comfortable, less fatiguing ride. The Traverse SL 35 is strong enough to attack the gnarliest terrain, durable and comfortable enough to hammer the chunder day in, day out, and light enough to make XC racers smile. - Backsweep: 8 degrees - Clamp: 35mm - Rise: 30mm - Upsweep: 6 degrees - Weight: 227 grams
Mass is the enemy of performance, so we pulled out all the stops to make the Alpinist Cockpit the lightest one-piece bar/stem combo that passes our standards; at 255 grams (110 mm x 420mm). Not only does light weight make for faster climbing, it also improves acceleration and ride quality. The Alpinist Cockpit's round tube shape and tradition bend respect tried and true forms, but the optimized composite layup and internal cable routing are decidedly modern. Available in 10 sizes, there's one that will fit you perfectly. And because they are backed by a no-fault crash replacement policy and lifetime warranty, you can rest easy knowing that we've got your back. - Bend: Tradition radius ( 125mm Drop / 75mm Reach) - Clamp Diameter: 31.8 - Compatibility: Shimano, SRAM, Campagnolo; Di2 and EPS - Material: Advanced carbon composite - Sizes: 400 mm x 80/90/100mm; 420mm x 90/100/110/120mm; 440mm x 110/120/130mm - Stem Angle (Rise): 6-Degrees - System Weight Limit: 275lbs / 125kg - Weight: 255 grams (110 mm x 420 mm)
- 6061-T6 polished aluminum handlebar, similar to Torrington North Road - Compatible with MTB-style levers and grips - Clamp diameter: 25.4mm - Width: 21.3" (540mm) - Rise: 2.0" (51mm)
The Sparrow is a touring/townie bar. - The 495mm version is more agile for squeezing through traffic than other townie/MTB bars. - The 520mm is still narrow, but with a grip area that fits levers and shifters. - The 560mm size is better for climbing and single-speeders. Try all the sizes on a single-speed or fixie. - Can be used flipped to be used as a riser bar or down for a less upright position. - Shotpeened Tange Aluminum - 25.4 mm clamp diameter - 50mm drop/rise - 55° backsweep - 22.2mm grip diameter, 20.0mm inside diameter at ends to allow use of pursuit levers. - Weight 245g (495mm)
- 6061 Premium butted Aluminum, high-strength design. - Short reach for optimal brake/shift control. - Shallow Bend Drop: 125mm drop x 65mm reach
Specialized Alloy Mini Rise Handlebars area wide handlebar made of premium alloy with a minimal 10mm of rise. - High-strength 7000-series premium aluminum alloy - Rise: 10mm - Width: 750mm and 780mm - Clamp diameter: 31.8mm
Page 1 of 2 Next page