Other

The Ohlins Stumpjumper Spring sets a new benchmark for spring rate accuracy and light weight for steel springs. - Ultra-fine spring rates to ensure perfect set up for all weights. - Spring rates are broken down to 4 N/mm (23 lbs./in). - Fits Ohlins TTX shock absorber for Stumpjumper FSR only. - Made with proprietary ultra lightweight steel, it's incredible for keeping your build weight down for trail riding.

The new generation spring series features a race-ready weight with big mountain strength. You'll also find advanced technologies that feature a multi-step surface treatment process, as well as cutting-edge heat treatments. Lastly, we use wire materials that allow us to stress the wire harder, without causing damage to the spring, and therefore design lighter springs. - Precise spring rates are broken down to 4 N/mm (23 lbs./in).

ReMote Sustain Lever - Levers are Reverb Stealth series specific - A-series have no Rockshox marking below the head whereas B-series have gold Rockshox markings below the head - Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Only compatible with Reverb Stealths - Features a leak-proof, robust, and low-maintenance mechanical actuation system - Easy cable detachment for service, travel or bike shipping - 40mm reduction in in-frame height compared to Connectamajig Reverbs

Metric fastener kit with an assortment of nuts, bots and washers. - Assortment of commonly used bicycle fasteners

RockShox Sektor DebonAir Assemblies - Includes air top cap, Air spring and shaft bolt

Damper IFP Bodies for repair and maintenance of Rockshox rear shocks.

This BikeYoke allows the use of a standard shock in your Specialized bike. Epic 2018-2020 Includes: - 1x BikeYoke EP02 - 1x DU bushing - 1x reducer - 1x stainless steel bolt

Fit Kit SET812 contains all the parts needed to thru-axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru-axle. This kit includes: - 12 x 159—165mm thru axle with 1.5 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Air Can Assemblies for repair and maintenance of Rockshox rear shocks.

ReMote Sustain Lever - Levers are Reverb Stealth series specific - A-series have no Rockshox marking below the head whereas B-series have gold Rockshox markings below the head - Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Only compatible with Reverb Stealths - Features a leak-proof, robust, and low-maintenance mechanical actuation system - Easy cable detachment for service, travel or bike shipping - 40mm reduction in in-frame height compared to Connectamajig Reverbs

The Eclat Abyss Guard Sprocket. - Bolt drive sprocket

The OneLoc remote provides total control over your suspension at your fingertips. The increased leverage at the bar, translate in a smoother and easier actuation. - Can be mounted above or below handlebars - Great match for SRAM 1x drivetrains - Tall clamp allows OneLoc to easily fit non-SRAM components

- Lever Assembly, Aluminum lever Gen 2, Black (assembled, no hose, and includes barb and olive), Guide RS

RockShox Sektor DebonAir Assemblies - Includes air top cap, Air spring and shaft bolt

RockShox Motion Control IS Compression Dampers

Air Can Assemblies for repair and maintenance of Rockshox rear shocks.

Air Can Assemblies for repair and maintenance of Rockshox rear shocks.

Air Can Assemblies for repair and maintenance of Rockshox rear shocks.

RockShox Rebound Dampers and Seal Head Assemblies

Fit Kit SET808 contains all the parts needed to thru-axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru-axle. This kit includes: - 12 x 223—229mm thru axle with 1.5 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

ReMote Sustain Lever - Levers are Reverb Stealth series specific - A-series have no Rockshox marking below the head whereas B-series have gold Rockshox markings below the head - Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Only compatible with Reverb Stealths - Features a leak-proof, robust, and low-maintenance mechanical actuation system - Easy cable detachment for service, travel or bike shipping - 40mm reduction in in-frame height compared to Connectamajig Reverbs

OneLoc Remote Upgrade Kit - Upgrade from crown adjust to remote adjust - Includes OneLoc remote lever and compression damper

Paul Components Melvin Chain Tensioner. Converts frames for single speed use. Long enough for a Dingle-setup, (2 rings, one cog) 20T max. - The Melvin uses two pulleys, just like a rear derailleur, which gives it 20 teeth of chain wrap - Will work with multiple front chain rings while maintaining proper chain tension - The pulleys are made of extruded and machined aluminum and have sealed bearings for durability - Pulleys are 2.25mm thick at the tooth which fits inside most narrow 6 through 9 speed chains, and the pulley cage is wide enough to allow 1/8? single speed chains as well - Long enough for a Dingle-setup, (2 rings, one cog) 20T max - Do not use with a coaster brake or fixed gear - Includes Paul's own Sealed Bearing Pulleys

Expand your choice of cranks for use in frames with 41mm ID shells. Replace your bottom bracket with these dual-row flanged bearings and run 30mm spindle cranks in your frame. These bearings fit directly in frames with 41mm ID bottom bracket shells. Crankset spindle length must be longer than 104mm when used in a 86.5mm wide BB shell. - Sold individually (two needed per frame) - Bearings: Enduro Dual-Row ABEC-3 - Color: Silver - Bottom Bracket/Frame Interface: BB86, BB92, PF90, BB104/107, PF121, PF132 - Bottom Bracket Shell Width: 86.5mm – 132mm - Bottom Bracket Shell I.D.: 41mm - Flange OD: 42mm - Crank Spindle Diameter: 30mm - Over Bearing Width: 92mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Weight: 36g

Fit Kit SET811 contains all the parts needed to thru-axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru-axle. This kit includes: - 12 x 168—180mm thru axle with 1.75 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET814 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru axle. This kit includes: - 12 x 169—178mm thru axle with 1.5 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Force eTap AXS Rear Derailleur Pulley Kit - Steel bearings - 12-Speed

The new generation spring series features a race-ready weight with big mountain strength. You'll also find advanced technologies that feature a multi-step surface treatment process, as well as cutting-edge heat treatments. Lastly, we use wire materials that allow us to stress the wire harder, without causing damage to the spring, and therefore design lighter springs. - Precise spring rates are broken down to 4 N/mm (23 lbs./in).

Fit Kit SET701 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to your fork with a 15 mm thru axle. This kit includes: - 15 x 148 mm thru axle with M15 x 1.5 mm thread pitch to fit Rock Shox forks (may fit others as well) - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET826 contains all the parts needed to thru-axle mount an Old Man Mountain bike rack to the rear of your bike with a 12 mm rear thru-axle. This kit includes: - 12 x 175—184mm thru axle with 1.0 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.