Other

Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. - KEB-SL - linear strand, Kevlar reinforced, compressionless brake housing with Slick-Lube liner - Perfect for full-housing, high-performance bikes with mechanical disc or rim brakes - 20 black alloy lined end caps, 10 black POP end caps included

Magura Caliper Cover Ring Kit

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Service your suspension fork with Enduro Seal KIts. - Custom made for each make and model of fork

Replacement swing plates for Alternator 1.0 dropouts.

Our Post-Lock is a bicycle rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. Post-Locks do not have a lip like our Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp. - NOTE: This IS NOT a seat collar and CANNOT BE USED to keep your seatpost in place - NOTE: NOT FOR USE with carbon fiber seatposts - NOTE: Please consult your seatpost manufacturer to check compatibility - Max torque 3–5Nm - AL-6061 Aluminum - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Available for 27.2, 30.9, and 31.6 mm diameter seatposts

Rack-Locks are one part form, two parts function. Sure, they still look great and do a great job of keeping your seatpost in place, but they also provide a mounting position for the front struts of a rack. - Max torque 3–5Nm - AL-6061 Aluminum - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Stainless steel pivot and bolt - Available in 30.0, 32.0, 35.0, and 35.4 mm sizes - Black anodized with laser-etched logo - 45g for a 32.0mm collar

Surly Thru-Axles are low-profile, bolted Thru-Axles are specifically designed for use with Surly thru-axle compatible frames. Offered in several sizes, for both front and rear wheels. 12x142 Rear Thru Axle: - Fits: Midnight Special and MDS Dropout bikes including Instigator, Legacy Karate Monkey & Legacy Krampus. 12x142/148 Rear Thru Axle: - Designed for frames with Surly Gnot Boost spacing (145mm), capable of working with 142 or 148mm rear hubs - Fits: Karate Monkey, Krampus, Troll, Ogre, ECR 12x177 Rear Thru Axle: - Fits: Wednesday 12x197 Rear Thru Axle: - Fits: Ice Cream Truck, Big Fat Dummy 12x100 Front Thru Axle: - Fits: Midnight Special 15x110 Front Thru Axle: - Fits: Karate Monkey, Krampus 15x150 Front Thru Axle: - Fits: Wednesday, Ice Cream Truck, Big Fat Dummy

Rated fully KICKASS by a very authoritative entity who will remain unnamed, Surly's cast and polished stainless steel clamps won't rust or chip paint because they can't (even the black ones!). They're shiny! They look good! And most importantly, they deliver the clampability seatposts crave.

Flat Mount Disc Caliper Bracket Bolts

The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

The Problem Solvers Steerer Tube Shims are for installing 1-1/8-inch diameter threadless stems on 1-inch diameter threadless forks. The shim is made of light, durable anodized aluminum and is chamfered on the ends for easy stem installation.

Forged Alloy seat-clamp.

RockShox XLoc Parts

Customize your ride with SRAM bar end plugs.

Dimension Seatpost Binder Bolts - 16g

Small parts for Wolf Tooth ReMote.

Replacement foam rings and bottom out bumper for your REVIVE MAX dropper post. The foam ring in the lower tube of your BikeYoke dropper post is a crucial component that prevents water and dirt from entering your post too easily. Keep it dry and clean at all times so your post can breathe and replace if needed. Kit includes: - 2x foam ring - 1x bottom out bumper

Replacement foam rings and bottom out bumper for your BikeYoke dropper post. The foam ring in the lower tube of your BikeYoke dropper post is a crucial component that prevents water and dirt from entering your post too easily. Keep it dry and clean at all times so your post can breathe and replace if needed. Kit includes: - 2x foam ring - 1x bottom out bumper Fits: - REVIVE (not REVIVE MAX) - DIVINE - DIVINE SL - DIVINE SL Rascal

Designed around the DVO Onyx SC fork to allow fitting the EVO Bolt-on fenders via the 3 bolt holes in the back of the fork. Also compatible with the Sapphire and Diamond fork. Compatible with Mudhugger EVO Shorty Bolt-On and EVO (Long) Bolt-On fenders. Kit includes: - 1x DVO Adapter bracket - 2x 12mm M4 bolts - 1x 16mm M4 bolt (for centre hole) - 2x self-tapping screws

Ohlins adapter kit for fitting the EVO Bolt-on fenders to your OHLINS forks. Compatible with RXF 38 (2019+) and DH forks. Minimum Fork Offset: 44mm Compatible with Mudhugger EVO Shorty Bolt-On and EVO (Long) Bolt-On fenders. Kit includes: - 1x Ohlins adapter Bracket - 3x M4 bolts - 1x Hex key

The ZEB Adapter for fitting the EVO Bolt-On fenders to your Rock Shox ZEB fork. Minimum Fork Offset: 44mm Compatible with EVO Shorty Bolt-On and EVO (Long) Bolt-On fenders. Kit includes: - 1x ZEB adapter bracket - 3x M3 bolts - 3x M3 washers - 1x 3mm bolt sleeve

The Problem Solvers Brake Mounting Nut is for front caliper brakes that take recessed fixing nuts. This chrome-plated steel Allen nut comes in 2 long lengths so that it will grip enough threads to tightly fasten the brake on even the thickest of fork crowns.

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2

Surly Chain Tensioner part

Replacement dropout screws for the Surly Straggler. - Bolt length: 40mm