Tools/Maintenance

The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links

White Lightning's Crystal Grease is so pure and innovative, it's clear. Premium base oils allow this 100% waterproof grease to provide smooth, long-lasting lubrication and the clear color won't stain or hide damage and contaminants. And, you'll feel good knowing that it's biodegradable, non-toxic, and won't harm carbon, seals and other crucial components.

Clean your chain in under 20-seconds with White Lightning's The Trigger. Simply close the lid of The Trigger over your chain, spray, and backpedal your chain for about three revolutions. The Trigger comes with one 12-ounce can of Clean Streak so you'll have everything you need for a clean, quiet ride.

Designed to press in all current wheels mfg bottom brackets! our universal bottom bracket frame drift is designed to press all current wheels mfg bottom bracket cups in to your frame. The adapter is machined with multiple steps to fit common bottom bracket shell inside diameters listed in the compatibility tab below. Each step is laser etched with the diameter size. Drift can also can be used as a frame bottom bracket shell sizing guide! - Inner hole sized to fit 1/2" threaded rod. (Not for use with our Press-1 or Press-4 ) - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg BP0006, BP0007 - Machined aluminum - Anodized red - Sold individually We do not recommend it for use with press with a rod diameter less than 1/2". When used with a smaller rod, it is almost impossible to prevent the cups or bearings from pressing in straight.

Wheels Manufacturing Sealed Bearing Extractor for GXP (22mm) bearings Fits: SRAM GPX bottom bracket bearings and other bearings with an inside diameter of 22mm

Precision-machined anodized aluminum tool designed to allow for easy installation, removal, or adjustments of the Shimano Hollowtech II Crankset compression bolt.

The Wheels Manufacturing universal bottom bracket drift presses all current Wheels Mfg bottom bracket cups into your frame or bearing cups. The adapter is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed below. Each step is laser etched with the diameter size. - Inner hole sized to fit 1/2" threaded rod. Not for use with Wheels Mfg PRESS-1 or PRESS-4 - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg Universal BB Press - Machined aluminum - Anodized Red - Sold individually - Drift can also be used as a frame bottom bracket shell sizing guide! Fits the following bottom bracket shell sizes: - BB30 (42mm) - PF30 (46mm) - BB86, BB92 (41mm) - BBRight (46mm) - BB386EVO (46mm) - Cannondale BB30A (42mm) - Cannondale PF30A (46mm) - Specialized Carbon OSBB (46mm) - Specialized Alloy OSBB (42mm) - TREK BB90, BB95 (37mm) - PF24 (41mm)

Sealed bearing extractor for 29mm ID bearings. Extractor has 1/2" thru hole for use with our 1/2" threaded rod press handles. - This extractor is part of a system that requires additional pieces to function.

Wheels Manufacturing Sealed Bearing Extractor - 9mm Fits: - 609 - 9227 - Other bearings with an inside diameter of 9mm

The Bottom Bracket Gauge Tool was designed to provide all the necessary measurements to identify the proper bottom bracket for a specific bike configuration. A metric scale runs along the long edges for measuring bottom bracket shell width and crank spindle lengths. Durable red anodized aluminum with laser etching. Overall size is 7" x 3" x 0.125". The gauge can measure: - bottom bracket width - bottom bracket shell inner diameter - crank spindle length - crank spindle diameter - bearing inner diameter Specifications: Measures crank spindle diameters: 22mm, 24mm, 29mm, 30mm Measures bearing inner diameters: 22mm, 24mm, 29mm, 30mm Measures bottom bracket shell inner diameters: 37mm, 41mm, 42mm, 46mm Measures bottom bracket shell widths: 61mm, 68mm, 73mm, 79mm, 86.5mm, 90mm, 92mm, 95mm, 100mm, 120mm, and 132mm Measures crank spindle lengths up to 180mm

Wheels Manufacturing Sealed Bearing Extractor - 12mm Fits the following bearings: - 6001 - 6801 - 6901

T-handle screwdriver: The ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. There is a special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head. - T-handle screwdriver for the transmission of high tightening and loosening moments - Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for high power transmission and fatigue-free working - "Take-it-easy" tool finder: color coding according to profile and size - With additional short arm for the transmission of extremely high torques due to the leverage of the long arm - With holding function (HF) securely holds the hexagon socket screw on the tool

- T-handle screwdriver: Shape to allow high torque transmission in difficult tightening and loosening situations. - The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. - The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. - Holding function (HF) to securely hold the TORX screw on the tool. - Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head.

- T-handle screwdriver: Shape to allow high torque transmission in difficult tightening and loosening situations. - The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. - The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. - Holding function (HF) to securely hold the TORX screw on the tool. - Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head.

- Joker 6003 pedal size 15 with flat mouth to mount and dismount pedals - Particularly suitable for narrow wrenching situations on the bike - The special mouth geometry expands the placement possibilities of the tool - The low return angle in the mouth "takes" the screw every 15° - Slim ring side angled by 15°

Robust Bit-Check by Wera The Bit Holder allows for a quick overview of the Bit Set available inside, while ensuring they do not get lost. Its compact size makes it easy to transport, e.g. in your shirt pocket. The universal holder includes a strong magnet for the take-up of bits with 1/4" hexagon head drive. Bits can be inserted in a power screwdriver or used in the chuck of an electric drill. - Multi-component Bit-Check can be positioned upright for secure bit storage - Tough bits for universal use

- Handle/interchangeable blade system for rapide exchange of the blade - Stubby screwdriver handle with short blade for hard to reach areas. - Suitable for the mounting of bits with 1/4" hexagon drive - Strong permanent magnet, which also holds large and heavy screws. - The 2-component Kraftform handle with its practical combination of hard and soft zones allows for a firm grip and precise working. - Includes 6 bits located in a magazine in the handle - Bits (PH 1,2,3) (Flat 0.6x4.5, 1x5.5, 1.2x6.5mm)

High-quality, metric, combination ratchet wrench by Wera. The new generation of combination ratchet wrenches. Suitable for hexagon socket screws, bolts or nuts. Comes with holding function, thanks to the metal plate in the jaw, which reduces the risk of dropping nuts and bolts. The replaceable metal plate in the jaw secures nuts and bolts with its extra-hard teeth and reduces the danger of slipping. The integrated limit stop prevents any slipping around the bolt head and allows higher torque to be applied. - Practical holding function due to metal plate in the jaw - Limit stop prevents any slipping - The double-hex geometry reduces the risk of slipping - Return angle of only 30 degrees - "Take-it-easy" tool finder: color coding by size

- Handle/interchangeable blade system for rapide exchange of the blade - Stubby screwdriver handle with short blade for hard to reach areas. - Suitable for the mounting of bits with 1/4" hexagon drive - Strong permanent magnet, which also holds large and heavy screws. - The 2-component Kraftform handle with its practical combination of hard and soft zones allows for a firm grip and precise working. - Includes 6 bits located in a magazine in the handle - Bits (Torx 15,20,25) (Hex 3,4,5mm)

- T-handle shape to allow high torque transmission in difficult tightening and loosening situations. - Ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. - Bit holder for bits with 1/4'' hexagon drive - Rapidaptor technology for lightning-fast bit changes.

Material: premium chrome vanadium steel

- Blade chrome plated, black anodised tip - Handle – polypropylene

- 15 mm opening is laser cut with precision and perfect angle to help you loosen the pedals as easy as possible - 270mm of length for extra leverage - Small and light weight, perfect for toolbox and traveling

The wrench is used for tightening and unscrewing screws with 2, 2.5, and 3mm hex-shaped nuts.

Features ball-end hex wrenches which are specially useful for working under angle

- Metal tire levers are used on wheels where mounting and dismounting the tires with plastic tire levers is difficult or impossible. - Can be stuck behind the spoke, with help of the hook on the end of the lever

- This chain tool can cover anything from 5 to 11 speed - Its handle doubles in function as a valve core remover for Schrader and Presta valves

- Hex wrenches 4, 5, 6 - TX wrench 25 - PH1 screwdriver - Flat screwdriver 1.0 x 5.0

- The crank puller is designed to remove standard square spindle cranks. With help of the included adaptor other standards such as ISIS and Octalink cranks can also be removed.

- Hex wrenches 1.5, 2, 2.5, 3, 4, 5, 6