Parts

Our award-winning REVIVE is also available as an oversized version for 34.9mm seattubes. Not only the lower tube diameter increased to 34.9, but also the stanchion tube grew form 25mm to 28mm. Finally there is a dropper that gives a stunning look in beefy seattubes while gaining strenght and stiffness at the same time. This is unrivaled by the competition. Optimized wall thickness and materials keep the weight extremely low and so our REVIVE MAX weighs in lower than some "regular" sized posts of the competition. Let´s see, what´s special about our REVIVE posts: What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers? Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike? BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off. Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth, … And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before. To understand the benefits over other posts you have to know about the problems of many current designs first: Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced. That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of. The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”. Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down. And here is where the patented RESET VALVE comes into play: - Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand. - This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike. So, now one might already understand that: - No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings. - No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design - The hydraulic system can be reset to “new” via the unique “REVIVE-valving” - This means the hydraulic circuit is a very stable closed system and basically maintenance free. Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability: - Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play. - Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes. 1 set REVIVE dropper post includes: - 1x REVIVE Seatpost - 1x cable housing 1500mm - 1x inner wire 1700mm - 2x housing endcap - 1x barrel cable clamp - 1x air valve adapter - 1x Quick-Reset-Lever - 1x remote (optional) - 1x BikeYoke I-spec adapter or Splits Clamp (optional) - 1 set titanium saddle bolts and nuts (optional)

Well, what's to say about our new DIVINE SL? It is simply the lightest production dropper post in the world with a total length of 400mm and 80mm infinite drop. Tailored to the needs of XC and marathon racers, the DIVINE SL is the youngest offspring of our dropper family. Based on the award-winning and patented REVIVE technology, we've modified the internals to work perfectly with the shorter travel. Of course, you can mount and use your DIVINE SL also on bikes outside the XC department. However, the DIVINE SL was specifically designed in respect of XC riders' requirements. One of the features, is the "Tech-Climb" feature. While our DIVINE SL is completely locked in place in the top-out and bottom-out position for consistent riding position, the post can slightly spring in the middle positions. We've found out, that extremely steep and technical (e.g. rooty or rocky) uphill sections can be conquered with much more ease, when the saddle is just slightly dropped (lets say about 1-2cm). Having the saddle dropped just a bit (and not completely), the "Tech-Climb" feature" also adds some suspension to the post, filtering the impacts of roots and rocks. Back fully extended or fully dropped, the post is rigid again. Titanium saddle bolts, carbon and oval rail compatible forged clamping plates, tapered tubes. All of this comes stock on the DIVINE SL to achieve a sensational low weight of 395g (30.9/400mm). Another unique feature of our DIVINE SL: - You can easily cut it to a short as 283mm, if you can spare the extra length with your frame and saddle height. The cut weight can go to a minimum of 345g! - The shorter travel allows the DIVINE SL to come with a design, that doesn't require manual resets like the REVIVE. Of course, our DIVINE SL requires internal routing of the cable through your frame. 1 set DIVINE dropper post includes: - 1x DIVINE SL Seatpost - 1x cable housing 1500mm - 1x Inner wire 1700mm - 2x housing Endcap - 1x remote (optional) - 1x Bike Yoke I-spec adapter or Splits-clamp (optional)

- Ultralight bashring for light duty, not designed for high impact - 1/8" thick chainring is ideal for singlespeed bikes - Anodized and laser etched

Rain cover designed to be used when the bike is parked to avoid getting the leather saddle wet. A soaked leather saddle should not be ridden for long as it will deform the saddle’s shape.

- 3mm microfiber handlebar tape - Microfiber Bar Tape is manufactured from a synthetic textile which has been treated with a Polyurethane coating for maximum resistance against abrasion and moisture, providing excellent durability - Kit includes: 2 strips of microfiber tape and 2 rubber bar end plugs - Tape Length: 215mm

Padded rubber tape with a tough, durable surface with excellent grip in all weather conditions. Includes Brooks Rubber Bar End Plugs.

Our best rubber grips for straight bars, thermoplastic rubber is fused with organic cotton for a natural look and feel. Suitable for city, MTB and touring use and adjustable for specific performance. Our best rubber grips for straight bars, thermoplastic rubber is fused with nylon textile for a nice look and comfortable feel, substituting organic cotton in the natural colour version. With aluminium clamp and branded rubber end plug, and adjustable for specific performance, these grips are suitable for city, MTB, and touring use. The dual textures embossed into the rubber mean the rider can turn the grip and adjust it to their preferred option. IDEAL FOR: - Commuting in the city - Travelling the globe - Urban cycling

- Perforated leather handlebar tape - Genuine perforated leather - Kit includes: 2 strips of light, perforated leather bar tape, 2 rubber bar end plugs and 2 adhesive cloth strips - Self Adhesive: Yes - Tape Length: 215mm

The design of Brooks Slender Cambium Grips incorporates an aluminium shell around which the bar tape is wrapped in the manner of traditional handlebar tape. The tape is made from organic cotton and rubber and is held in place by aluminium clamps.

In the Brooks tradition, these grips are made of natural leather, the same long-wearing leather used for Brooks saddle tops. Each grip is made with a stack of leather washers. These washers are held together by 3 spokes, enabling the grip to be adjusted to the desired length. The standard length of each grip is 130mm, but each grip can be shortened to the desired length independently. The grips are delivered in a box containing shorter 80mm spokes to make them even shorter. - Inner Diameter: 22.2 mm - Weight: 290g per Pair

Brooks Slender Leather Grips feature vegetable-tanned leather tape, and are designed to offer an alternative performance option for the user, while maintaining the standard for sustainability set by the Plump Grips, allowing the user to replace worn parts if necessary. The design incorporates an aluminum shell around which the bar tape is wrapped in the manner of traditional handlebar tape. The leather is then held in place by aluminum and steel clamps which can be removed in the event that the tape requires replacement. The tape is made from the same vegetable-tanned leather used for Brooks Saddles. - Length: 100mm & 100mm - Inner Diameter: 22.2mm - Weight: 100g per Pair

Brooks Slender Leather Grips feature vegetable-tanned leather tape, and are designed to offer an alternative performance option for the user, while maintaining the standard for sustainability set by the Plump Grips, allowing the user to replace worn parts if necessary. The design incorporates an aluminum shell around which the bar tape is wrapped in the manner of traditional handlebar tape. The leather is then held in place by aluminum and steel clamps which can be removed in the event that the tape requires replacement. The tape is made from the same vegetable-tanned leather used for Brooks Saddles and natural cork. Made in Italy.

The Cambium C17 All Weather is made for years of hard riding in an angled riding position, for commuting in the city or travelling the globe. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride,” thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass reinforced back plate has loops for a saddle bag or other accessory.

The Cambium C19 All Weather is a wider saddle made for an upright riding position, for commuting in the city. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride”, thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass reinforced back plate has loops for a saddle bag or other accessory.

The Cambium C15 All Weather saddle is made for years of hard riding, in a forward riding position, for more sporty cycling. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride”, thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass reinforced back plate has loops for a saddle bag or other accessory.

The Cambium C19 All Weather Carved is a wider saddle made for an upright riding position. It features a hole for pressure relief and additional flex, eliminating contact points which cause discomfort for some riders. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride,” thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. The updated fiberglass reinforced backplate has loops for a saddle bag or other riding accessories. - Vulcanized natural rubber and nylon top - Steel rails with a reinforced plastic backplate - Length: 275mm - Width: 184mm - Height: 52mm - Weight: 490g

The Cambium C17 All Weather Carved is made for years of hard riding in an angled riding position, and features a hole for pressure relief and additional flex, eliminating contact points which cause discomfort for some riders. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride”, thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass reinforced back plate has loops for a saddle bag or other accessory.

The Cambium C15 All Weather Carved is made for years of hard riding in a forward riding position, and features hole for pressure relief and additional flex, eliminating contact points which cause discomfort for some riders. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride”, thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass reinforced back plate has loops for a saddle bag or other accessory.

The uniquely flexible, maintenance-free, waterproof top is designed to follow the rider's movements for immediate comfort and ease of use. To the eye, the Brooks Cambium C17 may appear quite racy in its shape and lines, which indeed it is. A saddle you can really settle into, the geometry and dimensions are based closely on that of our most recognizable model, the B17, ensuring the same timeless comfort mile after mile. - Length: 283mm - Width: 162mm - Height: 52mm - Weight: 415 grams - Frame: Steel

The Cambium All Weather C17 is made for years of hard riding in an angled riding position, for commuting in the city or travelling the globe. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is "ready to ride," thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass-reinforced back plate has loops for a saddle bag or other accessory. Materials - Vulcanized natural rubber And nylon top - Steel rails with a reinforced plastic backplate - Made in Italy Specifications - Length: 283mm - Width: 164mm - Height: 52mm - Weight: 464g

The Cambium C67 is designed for the commuter, urban cyclist and casual tourer, perfect for E-bike, cargo bikes and Dutch-style bikes, or for anyone cycling in the upright riding position in all weathers. The Cambium C67 is designed with the commuter, urban cyclist and casual tourer in mind—a perfect saddle when cycling in all weathers in the upright riding position. A comfortable bike seat made from vulcanised natural rubber, the C67 moves with you for long-lasting comfort requiring no break-in period. Offering stability thanks to the wider rear part of the saddle, the curved shape and the flexibility of the rubber base, this saddle offers maximum control during acceleration (as with the E-bike) and to prevent backward sliding during the ride, while the fan structure in fibreglass nylon adds resistance against stress and vibrations. A rubber grip on the internal back plate guarantee a solid and stable grap. Durable and waterproof, the C67 utilises a nylon top for weather and abrasion resistance, making it the best bicycle saddle for E-bike, cargo bike and Dutch-style bikes. FEATURES: - Vulcanised Natural Rubber Saddle Top - Flexible and Robust Touring Surface - UV + Abrasion-Resistant Waterproof Nylon Top - Innovative Fan structure in Fibreglass-Reinforced Nylon - Nose-piece and Saddle Plate in Fibreglass-Reinforced Nylon - Rubber grip on the saddle plate - Metal Back Plate branding detail - Durable, Anodised Aluminium Rivets - Tubular Steel Rails

Leave it up to Brooks to improve on a classic. The B17 Imperial features a design that dates back to 1890, with a pressure reducing cutout that ensures your comfort in the miles to come. And, of course, the B17 Imperial features Brooks' full-grain, premium leather, and trademark rivets for the ultimate in comfort, style, and durability.

Globally renowned and truly timeless, the B17 Standard is the saddle that secured Brooks' place in cycling history. It's been in constant production since 1910, providing cyclists around the world with over one hundred years of sublime support and unrivaled comfort. Each B17 Standard shapes itself to its rider, leading to a personal, customized saddle that fits like no other. And of course, it features Brooks' full grain, premium leather top secured by their trademark rivets for the ultimate in style, comfort, and durability.

Globally renowned and truly timeless, the B17 Aged is the saddle that secured Brooks' place in cycling history. It's been in constant production since 1910, providing cyclists around the world with over one hundred years of sublime support and unrivaled comfort. Each B17 Aged shapes itself to its rider, leading to a personal, customized saddle that fits like no other. The Aged model features specially treated leather that has been pre-softened, dramatically shortening the saddle's break in period. And of course, it features Brooks' full grain, premium leather top secured by their trademark rivets for the ultimate in style and durability.

Globally renowned and truly timeless, the B17 S Standard is the saddle that secured Brooks' place in cycling history. It's been in constant production since 1910, providing cyclists around the world with over one hundred years of sublime support and unrivaled comfort. Each B17 S Standard shapes itself to its rider, leading to a personal, customized saddle that fits like no other. The S models are shorter and wider than a normal B17 and are uniquely suited to women riders. And of course, it features Brooks' full grain, premium leather top secured by their trademark rivets for the ultimate in style and durability.

Among Brooks' most loved products, the B67 has inspired generations of cyclists to explore the open road on two wheels. The B67 is a modern update of a saddle first offered in 1927. It uses single seat rails for compatibility with modern seat posts. It's an ideal all-rounder for cyclists who like their handlebars higher than their saddles, perfect for city riding or weekend adventuring. And, of course, the B67 features Brooks' full-grain, premium leather, and trademark rivets for the ultimate in comfort, style, and durability.

Classically sprung and with a shape vetted by generations of cyclists, Brooks' Flyer is prepared to go the distance. The Flyer uses two rear springs to make flying over rough pavement or dirt roads a joy. This saddle is a favorite of long-distance tourists and city-bound commuters alike. And, of course, the Flyer Aged features Brooks' full-grain, premium leather, and trademark rivets for the ultimate in comfort, style, and durability.

Classically sprung and with a shape vetted by generations of cyclists, Brooks' Flyer S is prepared to go the distance. The Flyer S features a women's specific form, and the two rear springs make flying over rough pavement or dirt roads a joy. This saddle is a favorite of long-distance tourists and city-bound commuters alike. And, of course, the Flyer S features Brooks' full-grain, premium leather, and trademark rivets for the ultimate in comfort, style, and durability.

Brooks' flagship model, the B17 Special has offered sublime support and unrivaled comfort for more than a century. A favorite of casual and high-mileage cyclists alike, each saddle shapes itself to its rider, leading to a customized ride that fits like no other. The B17 Special's top features high-grade leather secured by Brooks' trademark, hand-hammered copper rivets.

Rooted in Brooks' racing heritage, the Swift Chrome features a racy shape and narrow shoulders, ideal for road bikes with a more aggressive fit. Every Brooks saddle shapes itself to is rider, offering the timeless, customized support that the company's reputation is built upon. And, of course, the Swift Chrome features Brooks' full-grain, premium tanned leather and trademark, hand-hammered copper rivets for the ultimate in comfort, style, and durability.